• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.354-362
• /
• 2015

Since allowable settlement of concrete slab track is about 30mm, a lot of attention must be paid to the settlement of the earthwork (reinforced trackbed, upper subgrade, under subgrade) under the concrete track. To this end, more experimental data should be accumulated through tests for these materials. In this study, we evaluate the long-term settlement of reinforced trackbed and subgrade materials using factors such as repeated loading conditions, water content, and grain size distributions in a large triaxial test and a large oedometer test. In cases in which the performance of the reinforced trackbed layer meets the design criteria, the settlement caused by train load was considerably small. But, when the water content increases in the subgrade, unexpectedly large settlement might occur for certain grain size distributions of the subgrade materials.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2015

Objectives: To evaluate the biodurability of Korean Chrysotile(KC), the changes in fibers numbers and changes in the element composition of fibers from the lung of Sprague-Dawley rats instilled KC(average size $4.74{\mu}m$, $59,043{\times}10^6$ fibers/mg) was estimated. Methods: Rats were administered 1 mg KC(low group) or 2 mg KC(high group) by a single intratracheal instillation. At each time point(5 days, 5 weeks, 10 weeks), the numbers of KC fibers and the changes of element composition(atomic %) of KC fibers from the lung of the rats were analyzed with transmission electron microscope equipped with energy dispersive X-ray spectrometer. Results: Over time, the number of fibers within the lungs of animals were reduced. The average length of the low and high group is significantly reduced from 5 days after administration. Over time, the fiber ratio of at least $5{\mu}m$ remaining in the lung tissue of the low concentration group was up but the high group was reduced. From day 5 after administration, the composition ratio(Mg) was significantly decreased in all groups. Conclusions: Size and composition of Korean Chrysotile in the lung tissue of rats was changed from 5 days.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.5
• /
• pp.752-759
• /
• 2015

We examined the feeding habits of larval Konosirus punctatus using 165 specimens collected from May to August 2011 in the Nakdong River estuary, Korea. We found that larval K. punctatus [3.9-8.4 mm notochord length (NL)] are carnivorous, consuming mainly rotifers. Their diet also included small numbers of rhizopods, tintinnids, euglenoids, copepods, larval bivalves, dinoflagellates, diatoms, and unidentified materials. To evaluate ontogenetic changes in dietary composition, we split the larvae into three size groups: < 5 mm, 5-6 mm, and > 6 mm NL. The smallest size group frequently preyed on rhizopods. As NL increased, the number of rotifers increased relative to those of rhizopods. Larvae also showed bimodal feeding for feeding incidence, with peaks in the midafternoon and at midnight, while the mean number of prey per individual peaked at 18:00-19:00 h.

• Journal of ILASS-Korea
• /
• v.20 no.3
• /
• pp.162-167
• /
• 2015

Recently, there has been rising interest in applying urea-SCR systems to large marine diesel engines because the International Maritime Organization (IMO) has decided to enforce NOx reduction regulations. Generally, in the case of urea-SCR of the marine diesel engine, a type of twin fluid atomizer has been using for injection of the urea solution. This study conducted to investigate an effect of the atomization of external-mixing twin fluid nozzle on the conversion efficiency of reductant. The lab-scaled experiment device was installed to mimic the urea-SCR system of the marine diesel engine for this study. In a low temperature inflow gas condition which is similar with the exhaust temperature of large marine diesel engine, this study found that the conversion efficiency of reductant of when relative big size urea solution droplets are injected into exhaust gas stream can be larger than that of when small size urea solution droplets are injected. According to results of this study, the reason was associated with decrease of reaction rate constant caused from temperature drop of inflow gas by assist air of twin fluid atomizer.

• Physical Therapy Korea
• /
• v.22 no.2
• /
• pp.30-40
• /
• 2015

Robot-assisted rehabilitation therapy has been used to increase physical function in post-stroke patients. The aim of this meta-analysis was to identify whether robot-assisted gait training can improve patients' functional abilities. A comprehensive search was performed of PubMed, Cochrane Central Register of Controlled Trials (CENTRAL), Physiotherapy Evidence Database (PEDro), Academic Search Premier (ASP), ScienceDirect, Korean Studies Information Service System (KISS), Research Information Sharing Service (RISS), Korea National Library, and the Korean Medical Database up to April, 2014. Fifteen eligible studies researched the effects of robot-assisted gait training to a control group. All outcome measures were classified by International Classification of Functioning, Disability, and Health (ICF) domains (body function and structures, activity, and participation) and were pooled for calculating the effect size. The overall effect size of the robot-assisted gait training was .356 [95% confidence interval (CI): .186~.526]. When the effect was compared by the type of electromechanical robot, Gait Trainer (GT) (.471, 95% CI: .320~.621) showed more effective than Lokomat (.169, 95% CI: .063~.275). In addition, acute stroke patients showed more improvement than others. Although robot-assisted gait training may improve function, but there is no scientific evidence about the appropriate treatment time for one session or the appropriate duration of treatment. Additional researchers are needed to include more well-designed trials in order to resolve these uncertainties.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.221-226
• /
• 2015

During the study periods, total 143 individuals of Lateolabrax japonicus were collected. Body length (BL) range was 2.0-11.8 cm. Empty stomach occurred in 8.4%. The most abundant prey was copepods. Among copepods, Tigriopus japonicus was the most abundant prey appeared 32.1 in %F. Next important prey was shrimps and mysids. The results of analysis in ontogenetic changes, main prey of two small size classes (2.0-3.9 cm, 4.0-5.9 cm) were copepods. Thereafter, copepods percentage was decreased, but shrimps, mysids, fishes percentage was increased by increasing body length from 8.0 cm< size class.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.272-281
• /
• 2015

Miniature smart-bullet is a human-carrying guided missile designed to hit a target easily while having a miniature size. Contrary to the normal missiles, miniature smart-bullet is highly expected to enhance the military strength and survival rate of troops by its compact size readily carriable to a single soldier. In this paper, previously developed techniques, activities and patents of miniature smart-bullet, particularly its structural shape and actuators are surveyed. Furthermore, analysis of required techniques to develop a miniature smart-bullet are also discussed for upcoming conceptual design.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.101-112
• /
• 2015

Because young men's slacks are becoming more slim-fitting today, this study attempts to identify room for improvement by comparing and analyzing the patterns of men's slacks in the literature and those of manufacturers. Selected for the study are two patterns from the literature and one from manufacturers (Slacks A, B, C); those from studies are slim silhouette pants with no tucking around the waist at the front. Subjects for the Fit tests and the pattern designs were men in their twenties with average body shapes in accordance with the figures in Size Korea 2010. Pants were made from muslin fabric and the Fit tests were carried out with three subjects and a panel of five experts to evaluate comfort and appearance. The analysis of the patterns revealed that Slacks A were the longest followed by C and then B. Slacks C had the most girth ease, and Slacks B were the slimmest in both length and girth. Movement tests showed Slacks A to be the most comfortable followed by B and then C. The appearance test found that Slacks B were the most attractive, followed by A, and then C. The fits at the front, back and sides of all three pants were more or less the same. We suggest that more studies be done on pants patterns adjusting them for proper ease and using elastic fabric in order to maintain the slim fit and also to be comfortable to wear.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.3
• /
• pp.1077-1100
• /
• 2018

The present study analyzed the effect of firms' external research and development (R&D) on corporate productivity, while investigating the moderating effect of firm size on the external R&D-productivity nexus. In the empirical analysis, we estimated South Korean manufacturing firms' total factor productivity (TFP) using the firm level data drawn from the Survey of Business Activities (Korea National Statistical Office) for the years 2006-2015. Thereafter, focusing on the role of external R&D and its interaction with the firm size in determining firms' TFP, the productivity function was estimated as well. To this end, we used ordinary least squares (OLS) and quantile regression to highlight the heterogeneous impacts of external R&D by companies' productivity level. Empirical results confirmed that firms' external R&D significantly enhanced corporate productivity in all manufacturing industries, from high-tech to low-tech. The moderating effect of firm size in determining the productivity effect of external R&D was not as prominent as in the case for internal R&D, which exhibited some degree of the size premium in the productivity-enhancing effect. These results suggest that regardless of the firm size, external R&D can be an important channel for corporate productivity improvement, and can be a particularly effective strategy for SMEs with relatively limited internal R&D capacities.

• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.229-236
• /
• 2015

This paper describes the effect of aggregate size on compressive behavior of high-strength steel fiber reinforced concrete. The Specified compression strength is 60 MPa and the range of fiber volume fraction is 0~2%. The main variable is the aggregate size, which was used for the aggregate size of 8 and 20 mm. So, ten concrete mixtures were prepared and tested to evaluate the fresh and hardened properties of SFRC at curing ages (7, 14, 28, 56 and 91 days), respectively. Items estimated in this study are the fresh properties (air contents, slump), hardened properties (compressive strength, modulus of elasticity, post-peak response and compressive toughness). As a result, the aggregate size has little effect on the compressive strength and modulus of elasticity. On the other hand, the ductile behavior was shown after post peak and the compressive toughness was increasing as decreasing the aggregate size. These effects are clearly represented in the fiber volume fraction 2%, which are the point appeared fiber ball. It is considered that the decreasing the aggregate size has effect on the fiber dispersibility.