• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.35-42
• /
• 2003

Nitric Oxide(NO) is produced in many organs of the body, including the lung and airways, and it is detectable in the exhaled air. The measurement of exhaled NO(eNO) provides a simple non-invasive means for measuring airway inflammation, such as asthma. We measured eNO among adult male workers to examine the distribution of eNO in healthy people and to find factors affecting eNO. We measured eNO in a sample of 921 adult workers who also performed lung function test and skin prick test. Exhaled NO was measured in a sitting posture without using a nose clip and NO free gas. NO was measured at three expiratory rates(l8; 42; 71 $m\ell$/sec) and the flow rate of 71 $m\ell$/sec was used in analysis. The average eNO concentration was 5.29 $\pm$ 2.98 ppb. The level increased with age but not significantly(P=0.0529). Exhaled NO showed positive relations to the height(P=0.0001), pollen 1 (P=0.0124), asthma history(P=0.0212), allergic rhinitis symptom(P=0.0302). Exhaled NO Concentration of smokers( 4.62 ppb) was significantly lower than that of nonsmokers(5.99 ppb; P<0.0001).

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.61-77
• /
• 2018

In this study, the effects of sitting position of the driver on the whiplash neck injury have been analyzed experimentally by using hybrid III series 50 percentile male crash test dummy. A testing platform consisting of vehicle ground, driver foot rest, driver seat and a 3-point seatbelt has been prepared. This testing platform and the instrumented crash test dummy are prepared for tests according to the Euro NCAP whiplash testing protocol. The prepared test set-up has been exposed to 3 different acceleration-time loading curves defined in the Euro NCAP whiplash testing protocol by performing sled tests. 9 different sled tests have been performed with the combinations of 3 different seating positions of the crash test dummy and 3 different acceleration-time loading curves. The sensor data obtained from the crash test dummy and high-speed videos taken are analyzed according to the injury assessments criteria defined in the Euro NCAP whiplash testing protocol and the criticality of the whiplash injury is defined. It is seen that the backset distance of the driver head with the headrest and the height difference of the top of the head of the driver with the headrest have a great importance on whiplash injuries.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.2
• /
• pp.34-40
• /
• 2008

Purpose: We defined osteoarthritis of the knee as knee pain and crepitus in over 40 years old. The usual clinical manifestation include pain, stiffness, crepitus and loss of function. Methods: We studied 40 cases of the degenerative arthritis of knee clinically. The body mass index(BMI, weight(kg)/height($m^2$) was used as a measure of obesity. Pain self assessment scale by Million Index in according to age, occupation, BMI. Results: Gender by pain self assessment scale was 6.5 in male and 6.6 in female(P<0.05). The prevalence rates obese was 40%. Occupation by pain self assessment scale was 7.0 in Sitting and 5.7 in Standing(P<0.05). Prevalence was increased with age by pain self assessment scale in aged 40-69 years. Conclusion: It has been known that the obesity is one of the predispsing factors of the primary degenerative arthritis of knee. A flexion weight bearing view of the knee obtained at $30^{\circ}$ to $40^{\circ}$ of the joint flexion may be more sensitive in assessing damages to hyaline cartilage because the knee flexion is an important component of the stance phase.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.96-104
• /
• 2009

An anatomically detailed elderly human body model is under development. Using the anthropometric database of domestic nation-wide size survey, SizeKorea, a standard size and shape of 50th %tile elderly was constructed. Through the local recruitment process, a male volunteer with 71 years of age, 163cm of height and 63kg of weight has been selected. The exterior (skin) and interior (skeleton and organ) geometries were acquired from whole body 3D laser scan and various medical images such as CT, X-ray, and Ultrasonic of the volunteer. A particular attention has been paid into the combining process of exterior and interior geometries especially for joint articulation positions since they were measured at different postures (sitting vs. supine). A whole ribcage of PMHS which possessed similar anthropometry and age of standard 50th %tile elderly was prepared and dissected for the precise gauge of cortical rib bone thickness distributions. After completing the morphological construction of elderly human body, the finite element modeling will be processed by meshing elements and assigning mechanical properties to various biological tissues which reflect the aging effect.

• Earthquakes and Structures
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2022

Masonry constructions exhibit uncertain behaviors under dynamic effects such as seismic action. Complex issues arise in the idealization of structural systems of buildings having different material types and mechanical properties. In this study, the structural behavior of a vaulted masonry building constructed using full clay brick and lime-based mortar and sitting on consecutive arches was investigated by experimental and numerical approaches. The dimensions of the structure built in the laboratory were 391 × 196 cm, and its height was 234 cm. An incremental repetitive loading was applied to the prototype construction model. Along the gradually increasing loading pattern, the load-displacement curves of the masonry structure were obtained with the assistance of eight linear displacement transducers. In addition, crack formation areas, and relevant causes of its formation were determined. The experimental model was idealized using the finite element method, and numerical analyses were performed for the area considered as linear being under similar loading effect. From the linear analyses, the displacement values and stress distribution of the numerical model were obtained. In addition, the effects of tie members, frequently being used in the supports of curved load-bearing elements, on the structural behavior were examined. Consequently, the experimental and numerical analysis results were comparatively evaluated.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.29-43
• /
• 2015

Objective: The aim of this study is to develop management guidelines and a procedure for an anthropometric suitability assessment of the main control room (MCR) in nuclear power plants (NPPs). Background: The condition of the MCR should be suitable for the work crews in NPPs. The suitability of the MCR depends closely on the anthropometric dimensions and ergonomic factors of the users. In particular, the MCR workspace design in NPPs is important due to the close relationship with operating crews and their work failures. Many documents and criteria have recommended that anthropometry dimensions and their studies are one of the foremost processes of the MCR design in NPPs. If these factors are not properly considered, users can feel burdened about their work and the human errors that might occur. Method: The procedure for the anthropometric suitability assessment consists of 5 phases: 1) selection of the anthropometric suitability evaluation dimensions, 2) establishment of a measurement method according to the evaluation dimensions, 3) establishment of criteria for suitability evaluation dimensions, 4) establishment of rating scale and improvement methods according to the evaluation dimensions, and 5) assessment of the final grade for evaluation dimensions. The management guidelines for an anthropometric suitability assessment were completed using 10 factors: 1) director, 2) subject, 3) evaluation period, 4) measurement method and criteria, 5) selection of equipment, 6) measurement and evaluation, 7) suitability evaluation, 8) data sharing, 9) data storage, and 10) management according to the suitability grade. Results: We propose a set of 17 anthropometric dimensions for the size, cognition/perception action/behavior, and their relationships with human errors regarding the MCR design variables through a case study. The 17 selected dimensions are height, sitting height, eye height from floor, eye height above seat, arm length, functional reach, extended functional reach, radius reach, visual field, peripheral perception, hyperopia/myopia/astigmatism, color blindness, auditory acuity, finger dexterity, hand function, body angle, and manual muscle test. We proposed criteria on these 17 anthropometric dimensions for a suitability evaluation and suggested an improvement method according to the evaluation dimensions. Conclusion: The results of this study can improve the human performance of the crew in an MCR. These management guidelines and a procedure for an anthropometric suitability assessment will be able to prevent human errors due to inadequate anthropometric dimensions. Application: The proposed set of anthropometric dimensions can be integrated into a managerial index for the anthropometric suitability of the operating crews for more careful countermeasures to human errors in NPPs.

• Journal of Preventive Medicine and Public Health
• /
• v.5 no.1
• /
• pp.97-104
• /
• 1972

For the purpose of ascertaining the status of physical growth and health status of the University Students, an intensive survey was conducted by the authors towards a total of 1,250 (Male 792, Female 458) who passed the written entrance examination at the Kyung Hee University in 1972. The items included the measurements on physical growth, various physical and nutritional indices, status of visual distourbance, dental status and tuberculosis. The findings and results cad be summarized as follows; 1. Physical Growth and Develspment. i) The average of body height by anthropometric was $169.39{\pm}5.05cm$ in male and $157.45{\pm}4.43cm$ in female. ii) The averages of body weight by sex were $59.42{\pm}6.47Kg\;and\;51.81{\pm}5.21Kg$, respectively. iii) The averages of chest-girth were $87.18{\pm}5.30cm\;and\;80.51{\pm}4.53cm$. iv) The averages of sitting-height were $92.21{\pm}2.79cm\;and\;86.28{\pm}2.57cm$. In all cases the male measurements were higher than female. 2. Various ludices about Physical Growth and Development; i) Relative body weights by sex were 35.08 and 32.91, relative chestgirth 51.47 and 51.13, and relative sitting-height 54.43, 54.79, respectively. ii) Rohrer index was 1.222 in males and 1.327 in females, Kaup index 2.071 and 2.089, Verveck index 86.54 and 84.04, and Pelidisi index 91.15 and 93.08, respectively 3. Status of visual distourbance The vision of the students under 0.8 with Landolt's testing chart was 45.4% in left eye and 46.6% in right eye(male: 44.4% and 45.7%, female: 47.2% and 48.0%), while under 0.6 in both visions was 41.0% and 40.5% (male: 40.8% and 40.7%, female: 41.5% and 40.2%), respectively. 4. Dental Status Out of total 19.4% (male 19.2%, female 19.6%) had gingivitis, the female incidence rate of gingivitis was higher than male. Average number of teeth in each subject was 29.6 teeth: male had 29.9 teeth and female had 29.1 teeth. The caries rate was 78.9%(male 75.6%, female 84.5%), the female caries rate was higher than male. Total filing per subject was 35.6% (male 34.0%, female 37.1%), female incidence was higher shan male. The average number of i) Caries per tooth rate was 8.5% in male and 9.2% in female, ii) Missing per tooth rate was 0.3% and 0.2%, iii) Filling per tooth rate was 3.9% and 4.2%. in all cases, the female incidences were higher than the male. The average number of D.M.F. was 3.8 teeth in male and 4.0 teeth in female, female was higher than male. The average rate of D.M.F. was 12.7% in male and 13.7% in female, female was higher than male. 5. Pulmonary infiltration Among the total, 53 students were diagnosed as pulmonary infiltration (tuberculosis), of whom 51 were minimal cases, one were moderately advanced case and one were far advanced case.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2001

The purpose of this study was to examine height, weight, chest circumference, sitting height, hemato logical status, eating behaviors and nutrient intakes for primary school children in Gwangju. The subjects consisted of 101 boys and 109 girls aged $10{\sim}12$ years old. There were significant differences in the height, weight, chest circumference, sitting height between the boys and girls. Hct, WBC, RBC, Hb, serum GOT, GPT and cholesterol were measured. With regard to meal regularity, 47.4% of the subjects has been 'regular'. With regard to meal volume, 15.8% of the subjects has been 'heavy'. With regard to meal balance, 44.7% of the subjects has been 'no'. The study also found that 63.4% of the subjects skipped breakfast, liked western food. Their dietary intakes were assesed for 1 day by means of 24 hours dietary recall method. The mean energy intakes of the subjects were 1,663kcal for boys and 1,427kcal for girls. The subjects for boys(girls) consumed 58(52)g protein, 43(60)g lipid, 4.8(6.5)g fiber, 470(514)mg calcium, 896(824)mg phosphorous, 9.6(16.4)mg iron, 3,301(3,468)mg sodium, 2,169(2,192)mg potassium, 388(466)RE retinol, 1.1(0.9)mg thiamin, 1.1(2.2)mg riboflavin, 12.2(26.3)NE niacin, 146(99)mg ascorbic acid and 251(159)mg cholesterol respectively. Energy, protein, calcium, iron and retinol intakes were lower than the Korean RDA. The intakes of fat, fiber, calcium, iron, sodium, retinol, riboflavin and niacin of the boys were significantly lower than those of the girls. There were positive correlations between meal time and protein intake or fat intake of fiber intake or iron intake or retinol intake : negative correlations between meal time and sodium intake : negative correlations between saltiness and cholesterol intake : positive correlations between use of perilla seeds and riboflavin intake or niacin intake : negative correlations between energy intake or carbohydrate intake or phosphorous intake : negative correlations between frequency of eating-out and protein intake or fat intake or fiber intake or iron intake or retinol intake or thiamin intake or riboflavin intake or niacin intake.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.258-268
• /
• 2012

The bathroom is a space where humans fulfil certain daily needs, but for the disabled, it can be the most difficult space to use and may even be a cause of accidents and a source of danger. Previous studies on the bathroom have mostly proposed an ideal model of bathroom, but the majority of disabled people live in small homes of about $50m^2$ in size. As their bathrooms are usually very small, and existing houses have various structural limitations, more research should be conducted on the remodeling of residential bathrooms. This study analyzed a number of remodeling items in bathrooms, all of which were listed in previous studies. Based on 17 cases of residential bathroom remodeling in the homes of disabled people residing in Incheon in 2009, this study analyzed several remodeling items required according to the subject's characteristics, such as a lifestyle, gender, and family composition; and proposed the following remodeling requirements and improvement measures for ambulatory-disabled persons and sedentary-disabled people. First, as ambulatory-disabled people have lower-limb impairments, they required bathroom remodeling designed to improve their mobility in the bathroom. These subjects desired the installation of grab bars, as well as the elimination of floor level differences, the installation of non-slip flooring, a counter-top, a sink stand, and a shower holder whose height can be adjusted. Second, sedentary-disabled people move around in a sitting or crawling position, so many of them asked to eliminate floor level differences and vertically-installed bathroom furnishings. Basically, both people with ambulatory disabilities and people with non-ambulatory impairments requested the elimination of floor level differences and the installation of non-slip flooring and grab bars for the toilet and bathtub. They also asked for the heights of sinks, faucets, mirrors, shower holders, and cabinets to be adjusted to suit their needs.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.813-820
• /
• 2019

This study identified actual wearing and size dissatisfaction with jeans worn by upper grade elementary school girls. A survey was conducted on 147 10~12-year-old girls in order to collect basic data to design a slim fit jeans pattern for upper grade elementary school girls. The result of the study are as follows. Upper grade elementary school girls wore jeans at least once a week, 46.9% were 1~2 times, 31.3% were 3~4 times and 21.8% were more than 5 times per week. The size of the jeans they wear was often one size or two sizes larger than the actual height section. Upper grade elementary school girls preferred jeans that fit well and allow for a full range of motion; in addition, waist and hip measurements were important criteria when selecting size. The preferred length of jeans was those that go to the ankle along with slim-style jeans made of "cotton+spandex". In terms of dissatisfaction with jeans, upper grade elementary school girls showed discomfort when the lower back waistline slipped when sitting and when there was a tight crotch area. In addition, cases of exchange or return were found to be due to fit, including waist, hip or thigh measurements even when the area most repaired is was the pant length.ired is pant length, cases of exchange or return were found to be due to fit, including waist, hip, or thigh measurements.