• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.3
• /
• pp.10-18
• /
• 2001

The existing measurement system to ground-surface displacement survey of the slope has been including the hazard for the measure in site and the difficulty for install, maintenance and control of expensive instruments, which are impossible of whole survey on the slope surface. To overcome of those defects, Softcopy Photogrammertry method is used, which can measure displacement of ground-surface on the slope and structure deformation vectors. Recently, the survey methods applying the advantages of Photogrammetry and Digital Photogrammetry Survey are widely used. In this study, therefore, the development and application of the new instrument mechanism on the the site example are studied. Through the application of Softcopy Photogrammetry, the 3-D data of ground surface on the dangerous slope could be effectively obtained at the long distance, which are obtained through the reform process of contour line. Those are different to the results of the Close-Range Photogrammetry analysis. In ground instrumentation parts, the new practical system shall be the technical base to improve of the instrument machine as well as can be widely applied in civil engineering and others branch.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.387-392
• /
• 2005

The research was performed to predict the potential landslide with roughness index. It was known that fractal dimension and surface area index can be represented the topography, specially when the natural slopes were rough or rugged. A test site was selected and fractal dimension and surface area index were calculated from the irregular triangle network. Fractal dimension were ranged between $2.016{\sim}2.046$ and surface area index $1.56E+07{\sim}2.59E+07$. Surface area index increased as fractal dimension increased. Slope stability was calculated by infinite slope stability analysis model and was compared to slope stability by fractal and surface area index. In the result, unsafe zones where slope stability is under 1.1 were $5.11{\sim}6.25%$ for the test site. It can be said that fractal dimension and surface area index are a good index to evaluate the slope stability because when fractal dimension and surface area index are greater, then stability of the site is more unsafe.

• Journal of the Korean housing association
• /
• v.20 no.1
• /
• pp.45-58
• /
• 2009

This research starts from the questioning of current housing development on the hilly site in Korea. It aims to investigate various design techniques of low-rise housing as an alternative housing plan on hilly sites. Several generic solutions of the combination of building type and road pattern are tested for a simulation process, and evaluated in terms of crucial design issues; development density, parking space and open space. As a result, four reasonable models are selected for making full use of geographical features of hilly site, two models each land slope of $18^{\circ}$ and $26^{\circ}$. Several design techniques for each model are also suggested, in ensuring the development feasibility by considering land slope, vehicular access and parking, common open space, and community facilities.

• Geomechanics and Engineering
• /
• v.13 no.4
• /
• pp.571-584
• /
• 2017

Slope mass rating (SMR) is commonly used for the geomechanical classification of rock masses in an attempt to evaluate the stability of slopes. SMR is calculated from the $RMR_{89-basic}$ (basic rock mass rating) and from the characteristic features of discontinuities, and may be applied to slope stability analysis as well as to slope support recommendations. This study attempts to utilize the SMR classification system for slope stability analysis and to investigate the engineering geological conditions of the slopes and the slope stability analysis of the Gas Flare site in phases 6, 7 and 8 of the South Pars Gas Complex in Assalouyeh, south of Iran. After studying a total of twelve slopes, the results of the SMR classification system indicated that three slope failure modes, namely, wedge, plane and mass failure were possible along the slopes. In addition, the stability analyses conducted by a number of computer programs indicated that three of the slopes were stable, three of the slopes were unstable and the remaining six slopes were categorized as 'needs attention'classes.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1282-1288
• /
• 2010

In this study, Site Investigation Program of cut slope is developed using related techniques and experience got from practical application of Inventory Survey Program of cut slope in work for last 4 years. The Site Investigation Program is designed to can be loaded to the Mobile PC for convenience of carrying in filed, convenience of data input and revision, application of diverse programs, convenience of confirming data and facility of establishment of real-time database system using wireless communication like Inventory Survey Program. Also, for connection with Inventory Survey Program, it has a same work process and can establish real-time database system of almost data obtained in filed using stability analysis tool loaded in this program. Application of this developed program is expected to be an opportunity that can contribute to development of slope investigation and database system area using IT techniques.

• Korean Journal of Environmental Biology
• /
• v.24 no.4
• /
• pp.337-358
• /
• 2006

The field survey was conducted weekly from April to October in 2004 and 2005 on the sites along the 5.16 road. Sampling sites were made every 100 m height starting from 250 m altitude of both sides of Mt. Halla along 5.16 Road, which crosses the mountain from North to South. Totally 31,698 individuals of 76 species belonged to 25 families were collected. It was July that showed the largest number of species, as 48 species in the northern sloper 42 in the southern slope, and 22 at the highest site (at an altitude of 750 m), while it was April that showed the smallest as 17 species, 15 and 5, respectively. As for monthly fluctuation, the northern slope and the highest site reached their top in August, whereas it was June in the southern slope. In the analyses of similarity (chord distance) of any pair of temporal communities, the closest pair was between June and July in the northern slope area, between July and August in the southern slope and between July and September at the highest site, respectively.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.85-100
• /
• 2011

We were to investigate the geomorphological environment of optimum location in the object of Bronze Age's dwelling site (hereinafter called dwelling site) of total of 205 units confirmed in the 'Cheonan Baekseokdong Relic Group' distributed in hill of the uppermost stream part in the watershed of Jangjae stream in Cheonan, Chungnam Province. To do this, we classified the hill of the object of investigation where dwelling sites were distributed as 8 units of slope micro-landforms and again by combining them with the grade of gradient of 5 units subdivided them into ultra-micro-landforms of total 40 units. On the foundation of this, in the viewpoints of 'gradients of each of micro-landforms' analyzed the 'number of dwelling sites' and 'dwelling site distribution density (measure: number of dwelling sites/1000m²) of 'Cheonan Baekseokdong Relic Group'. As the result, the optimum landform environment where the dwelling sites were located were found to be largely 5 units of ultra-micro-landforms - ① flat land of crest flat, ② gentle slope land of crest flat, ③ flat land of crest slope, ④ gentle slope land of crest slope and ⑤ semi-gentle slope land of crest slope. This analyzed material will be used from now on as basic material which can predict the distribution of dwelling sites of Bronze Age men who dwelled in the watershed of Jangjae stream.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.809-819
• /
• 2022

This study was conducted to improve the stability of cut slopes of forest roads in granitic weathered soil areas. The study area is a national forest road (road length 28.48 km) in Pyeongchang-gun, Gangwon-do. After data collection, a statistical analysis was performed using IBM SPSS (Ver. 26.0). First, the correlation analysis showed that structure, slope position, soil erosion, slope, and aspect (N, S) were correlated with vegetation coverage (p < 0.05). Elapsed years, slope distance, and aspect (E, W) were found to have no correlation with vegetation coverage. (p > 0.05) Second, one-way ANOVA and Kruskal-Wallis test results showed that vegetation coverage was worse when the slope was located at the top or the middle of the slope than at the bottom of the slope. In addition, the site with sheathing and gabions showed good vegetation coverage when compared with the site without structures. In the case of soil erosion, areas with severe damage and moderate damage showed worse vegetation coverage. Therefore, it is necessary to strengthen the slope angle of the cut soil of the granitic weathered soil area from 1 : 0.5 - 1.2 to 1 : 0.8 - 1.5. In addition, structures such as sheathing and gabions should be installed on granitic weathered land.

• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.506-525
• /
• 2006

For the design of large scale rock slope which has complex formations and geological structures, generally, insufficiency of geotechnical investigations and laboratory tests are the main factors of slope failures doling construction. In such case, remedial measures to stabilize slope should be selected and applied through reliable investigations and analysis considering the geotechnical characteristics. The rock slope of this study, one of the largest cut slopes in Korea with a length of 520.0 m and maximum height of 122.0 m consists of metasedimentary rocks. And a case study on the causes of large-scale rock slope failure was carried out by analysis of landslides history and site investigations during construction. When the slope with the original design slope of 0.7: 1.0 (H:V) was partially constructed, the slope failure was occurred due to the factors such as poor conditions of rocks (weathered zone, coaly shale and fault shear zone), various discontinuities (joints, foliations and faults), severe rain storm and so on. The types of failures were rockfall, circular failure, wedge failure and the combination of these types. So, the design of slope was changed three times to ensure long-term slope stability. This paper is intended to be a useful reference for analyzing and estimating the stability of rock slopes whose site conditions are similar to those of this study site such as geological structures and geotechnical properties.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.503-508
• /
• 2003

In this study, we peformed ahead a field geological investigation, boring investigation for slope stability analysis in large scale slope failure area. But the geological stratum was not clearly grasped, because ground was very disturbed by large scale Granite intrusion. Furthermore, the existing test data was not pertinent to the large scale Granite intrusion site like here. Therefore, various kind of field test were performed to grasp clearly for geological stratum. And the results of back analysis, various kind tests used to slope stability analysis.