• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.253-262
• /
• 2010

In this study, localized heavy rainfall occurred during the collapse of steep slopes adjacent to the construction site and to ensure the safety of residents to build an early warning system was performed. Forecast/Alert range was estimated based on vulnerability landslide map and past disaster history. And established a critical line in consideration of the characteristics of local rainfall and operating a snake line, the study calculated causing and non-causing points. Also, be measured in real-time analysis of rainfall data in conjunction with the system before the steep slope failure occurred forecast/Alert System is presented.

• 한국대기환경학회지
• /
• 제17권4호
• /
• pp.299-312
• /
• 2001

The analysis of vent -emitted Hg concentrations and relevant environmental parameters was made from the inlet of 42 ventpipes in Nan-Ji-Do area of Seoul during September/october of 2000. Using these data, the fluxes of Hg from the ventpipes were also derived. The mean concentration of Hg, computed using the data sets collected from 42 ventpipes, was 420$\pm$619ng m$^{-3}$ with the range of 3.45~2,952ng m$^{-3}$ . Because of large differences in concentration levels between two sectors 1 and 2 and between plain and slope areas. evaluation of the data was made by dividing them into four different categories such as plain areas of sectors 1 and 2 (and/or slope areas of sectors 1 and 2). When this classification was applied, the computed fluxes were highly different among each group with the generally enhanced fluxes in plain area relative to slope area. The computed fluxes were then used to make comparative analysis of different source processes in the study area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.207-215
• /
• 2005

This paper presents a case history of a geosynthetics-reinforced segmental retaining wall, which collapsed during a sever rainfall immediately after the completion of the wall construction. In an attempt to identify possible causes for the collapse, a comprehensive investigation was carried out including physical and strength tests on the backfill, stability analyses on the as-built design based on the current design approaches, and slope stability analyses with pore pressure consideration. The investigation revealed that the inappropriate as-built design and the bad-quality backfill were mainly responsible for the collapse. This paper describes the site condition including wall design, details of the results of investigation and finally, lessons learned. Practical significance of the findings from this study is also discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.509-516
• /
• 2001

As the first step for the application of seismic landslide hazard maps to domestic cases, two types of hazard maps on Ul-joo from pseudostatic analysis and Newmark sliding block analysis are constructed and comllared. Arcview, the GIS program and the 1:5,000 digital maps of the test-site are used for the construction of hazard maps and tile parameters for the analyses are determined by seismic survey and laboratory tests. The results from the pseudostatic analysis have more conservative values of lower critical slope angles, although the results from the two different analyses have similar tendencies. In detail, with increasing the peak ground acceleration, the difference between the two analyses in the critical slope angle increases, while the difference decreases with increasing the maximum soil depth.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.228-233
• /
• 2001

In this case study, under conideration of field situations, such as increase of water level, height increment of the marine structure, dredging and backfill, the stability analysis of sliding and lateral flow of the marine structure in OOOharbor was carried out, and foundation reinforcement methods was presented. based on the results of site investigation, the stability analysis of slope sliding and lateral flow was performed as following. In section BH-1, 2, the analysis was performed in two cases that the marine structure was heightened and filled, and not heightened and filled. In section BH-1, 4, heightened and filled. The analysis results showed that the stabilities of slope sliding and lateral flow in section BH-1, 2, 3, 4 were unstable. After additional reinforcements with Deep Mortar Pile, the stabilities in section BH-1, 2, 3, 4 were evaluated as efficiently large.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.147-179
• /
• 2002

The important role of observational method in geotechnical engineering are emphasized together with the direction of future development, concerning successful application of the technique on the site investigation, design and feed back at various construction stages. Case histories on the application of feed back are introduced in order to achieve the most economical and reliable construction for tunnel, rock slope and deep excavations through feed back system at design and construction stages. Also the limitations and advantages of the observational method and the role of feed back system are discussed for construction of tunnel, rock slope and deep excavation in hard ground such as layered ground conditions including weathered, soft and hard rocks.

• 산업기술연구
• /
• 제27권B호
• /
• pp.193-199
• /
• 2007

This paper is a result of a case study about landslides at Whacheon area in Kangwondo occurred during heavy rainfall in 2006. A-day-accumulative rainfalls from July 12 to July 13 and July 15 to July 16 were 120mm and 110mm respectively. Five sites at which slope failures occurred were visited to figure out main causes of slope failures by investigating characteristics of rainfall, geological formation, topography and ground surface exploration around the boundary of the landslides. Based on the site investigation characteristics of landslide with respect to rainfall pattern, geological and topographical condition and pattern of landslide were evaluated.

• 한국환경복원기술학회지
• /
• 제5권5호
• /
• pp.58-66
• /
• 2002

We present a planting plan of the buffer-forest belts created at the boundary area of the waste landfill site which is located in the coastal area of Kyubg-Gi province. In order to form a proper section of ground soil excavated from the sea and a forest which shows a distinction of the vegetation stratification, the planting plan with trees, sub-trees, shrubs, and seedlings (produced at a sprout cultivation place) is devised with an adjustment of planting density. 1. The preparation of mounding is required for planting at a waste landfill site. We first estimate an economical and efficient banking height together with the quantity of soil, and prepare a planting ground with excavated ground soil for the consideration of soil recycling. On the planting ground a banking with a height of 1.5-2m is produced by self-supported soil, playing a role in a salt blocking and an irritation layer of planting. Finally, an additional banking with a height of 2m is produced by qualified vegetation soil, forming a vegetation section with a total height of 6m. 2. Since the planning site is located in the border, the planting area is composed of two regions : one is an inclined face (slope 1 : 3) toward the inside of the landfill site and the other is an inclined face (slope 1 : 4) toward the inland. The buffer planting in the former (latter) region consists of wind break forest (mixed-landscape forest) within a width of less than 35m. 3. Based on the data obtained from the literatures and the investigation of local plants, we choose the 21 plant species (such as Pinus thunbergii, Pinus densiflora, Sorbus alnifolia, Albizzia julibrissin and etc.) and the additinal 7 species which are grown at a sprout cultivation palce of the SUDOKWON landfill site (Rosa rugosa, Quercus acutissima, Prunus armeniaca var. ansu., and etc.). Sub-trees with a height of above 2.5m and seedlings are planted with an interval of $1.5{\times}1.5m$ ($0.45roots/m^2$) and $0.5{\times}0.5m$ ($4roots/m^2$), respectively. Here, both trees exhibit communities planting with more than three rows. Shrubs are planted with $9-16roots/m^2$, depending on their size. Since this case study provides a reference of the planting beds as well as a planting plan at the SUDOKWON landfill site, it is not sufficient for the present plan to be utilized for the formation of buffer-forest belts which are used for the analysis of environmental factor and the reduction of environmental pollutants in the sea waste landfill site. Thus, further studies with the ecological basis are demanded for the environment planting restoration in the sea waste landfill site.

• 농업생명과학연구
• /
• 제46권3호
• /
• pp.47-58
• /
• 2012

본 연구는 기후변화에 따른 난대상록수종인 황칠나무의 적지예측모델을 개발하기 위하여 수행하였다. 생장 및 입지환경 인자들간의 관계 구명을 통하여 양적 질적 자료 분석이 가능한 수량화 분석 방법에 의하여 황칠나무의 적지예측 평가기준을 도출하였다. 적지예측 프로그램은 ESRI, ArcView GIS 프로그램을 이용하여 개발하였다. 개발된 프로그램은 적지예측의 정확성 검토를 위하여 다양한 난대 상록활엽수가 분포하고 있는 전남 완도 지역에 적용하였다. 황칠나무의 적지예측 분석 결과, 최적지 표고 401~500m, 경사도 $15^{\circ}$ 이하, 국소지형은 산복 계곡부위, 퇴적양식 붕행토, 방위가 남쪽인 요철사면으로 나타났다. 완도지역의 황칠나무 최적지 등급별 맵핑 면적은 I 등급 1,487.2ha(25.4%), II 등급 1,020.3ha (17.4%), III 등급 2,231.8ha(38.2%), IV 등급 1,110.5ha(19.0%)로 나타났다.

• 지질공학
• /
• 제17권3호
• /
• pp.425-434
• /
• 2007

본 연구에서는 석분슬러지 혼합토를 복구토로 활용할 경우 조성되는 매립사면의 안정성 기준을 마련하였다. 이를 위하여 먼저 석분슬러지와 원지반토의 혼합비율을 5가지로 구분하고 각각에 대한 토질시험을 실시하였다. 실험결과 석분슬러지의 혼합비율이 감소할수록 전단강도 및 최대건조단위중량이 증가하는 경향을 나타내었다. 성토사면에 대한 국내외의 사면안전율 기준에 대한 조사를 토대로 석분슬러지 혼합토 매립사면의 사면안정등급을 불안정, 주의 및 안정의 3단계로 구분하였다. 석분슬러지 혼합토 매립사면에 대한 사면안정해석을 실시하여 안전한 사면높이, 사면경사 및 석분슬러지 혼합비율을 제안하였다. 매립사면에 대한 사면안정해석결과 석분슬러지 혼합토 성토사면의 사면높이를 10 m로 할 경우 사면경사는 1 : 1.8 이상 되도록 매립하여야 안정함을 알 수 있다. 그리고 사면높이를 15 m로 할 경우 석분슬러지 함유율이 50%이하로 하고 사면경사는 1 : 1.8 이상 되도록 매립하여야 안정함을 알 수 있다. 사면경사, 사면높이 및 석분슬러지 함유율이 동일한 조건일 경우 채석현장 내부의 절취암반에 접하여 매립된 사면과 평지에 성토하여 매립된 사면의 사면안정해석결과는 유사함을 알 수 있다. 이와 같은 석분슬러지 혼합토 매립사면의 안정성 기준은 채석현장에서 실무적으로 이용할 수 있을 것으로 판단된다.