• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.210-215
• /
• 1999

The proposed detector is consists of three-phase sinusoidal signal generator and peak detector. This peak detector can detect the peak voltage value at the state of variable frequency. In experi-ment three-phase sinusoidal signals are generated from D/A converter using IBM PC and deliv-ered to the peak detector. Each signals are squared by multiplier and summed up Peak value is the square root of summed value extracted by square root circuit.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권8호
• /
• pp.448-454
• /
• 1999

This paper describes a new dc-ac inverter system which for achieving sinusoidal ac waveform makes use of parallel loaded high frequency resonant inverter consisting of full bridge. Each one of the pair of switches in the inverter is driven to synchronous output frequency and the other is driven to PWM signal with resonant frequency proportional to magnitude of sine wave. A forced discontinuous conduction mode is used to realize the quasi-sinusoidal pulse in each switching period. Therefore the inverter generates sinusoidal modulated output voltage including carrier frequency that is resonant frequency. Carrier frequency components of modulated output voltage is filtered by low pass filter. Since current through switches is always zero at its turn-on in the proposed inverter, low stress and low switching loss is achieved. Operating characteristics of the proposed system is analyzed in per unit system using computer simulation. The output voltage of if includes low harmonics and it is almost close to sine wave. Also, the theoretical analysis is proved through the experimental test.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1844-1851
• /
• 2007

This paper presents methods for the compensation of sinusoidal disturbances with unknown amplitude, phase, and time-varying frequency in nonlinear systems. In the previous disturbance accommodation methods, the sinusoidal disturbance with unknown time-invariant frequency was considered. In the proposed method, the disturbance with unknown time-varying frequency is compensated. As for the control structure, two control inputs are designed separately in such a way that one of them is designed for the nonlinear system control without considering the disturbance, and the other one uses the disturbance estimate obtained from the disturbance accommodating observer. The stability analysis is done considering the disturbance estimation error and the numerical simulation demonstrates the proposed approach.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.762-769
• /
• 2016

The dynamic modulation transfer function (MTF) for image degradation caused by sinusoidal vibration is formulated based on a Bessel function of the first kind. The presented method makes it possible to obtain an analytical MTF expression derived for arbitrary frequency sinusoidal vibration. The error obtained by the use of finite order sum approximations instead of infinite sums is investigated in detail. Dynamic MTF exhibits a stronger random behavior for low frequency vibration than high frequency vibration. The calculated MTFs agree well with the measured MTFs with the slant edge method in imaging experiments. With the proposed formula, allowable amplitudes of any frequency vibration are easily calculated. This is practical for the analysis and design of the line-of-sight stabilization system in the remote sensing camera.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1283-1285
• /
• 1996

This paper proposed frequency estimation the method of distorted sinusoidal signals by harmoics. An approximate estimation based on FFT and the accurate basic frequency was estimated by proposed method with Fourer Series, and the harmonics were estimated by the basic frequency. The sinusoidal signals is extracted by filter banks based on the estimated hamonics. The rate of basic and hamonics power is estimated by the extracted sinusoidal signals and we developed their algorithm and programs.

• 음성과학
• /
• 제7권1호
• /
• pp.17-29
• /
• 2000

The STC(Sinusoidal Transform Coding) is a vocoding technique that uses a sinusoidal speech model to obtain high- quality speech at low data rate. It models and synthesizes the speech signal with fundamental frequency and its harmonic elements in frequency domain. To reduce the data rate, it is necessary to represent the sinusoidal amplitudes and phases with as small number of peaks as possible while maintaining the speech quality. As a basic research to develop a low-rate speech coding algorithm using the sinusoidal model, in this paper, we investigate the speech quality depending on the number of sinusoids. By varying the number of spectral peaks from 5 to 40 speech signals are reconstructed, and then their qualities are evaluated using spectral envelope distortion measure and MOS(Mean Opinion Score). Two approaches are used to obtain the spectral peaks: one is a conventional STFT (Short-Time Fourier Transform), and the other is a multiresolutional analysis method.

• 항공우주시스템공학회지
• /
• 제3권2호
• /
• pp.20-23
• /
• 2009

The structural analysis of liquid rocket engine was performed in the case of sinusoidal vibration load to verify structural safety. The finite element model is composed with main liquid rocket engine components, combustion chamber, turbopump, gas-generator, pyro-starter, main pipes, main valve, heat-exchanger, gimbal-mount and brackets. Natural vibration mode analysis and structural analysis for sinusoidal vibration load were performed. The natural mode frequency of liquid rocket engine is twice than that of launch vehicle. In the case of stress result of sinusoidal vibration load, the part of maximum stress has 1.4 margin, so the engine structure is safe for sinusoidal vibration load.

• 한국산업정보학회논문지
• /
• 제24권5호
• /
• pp.95-104
• /
• 2019

본 논문에서는 잔향 환경에 강인한 GSFM(Generalized sinusoidal frequency modulated) 펄스를 설계하는 기법을 제안하였다. GSFM 펄스는 SFM(Sinusoidal frequency modulated) 펄스의 일반화한 형태로써 거리와 도플러 분해능이 모두 우수한 압정형태의 모호성 함수를 가지는 장점이 있다. 하지만 일반화를 하는 과정에서 주기성이 사라지기 때문에, 빗살형태의 스펙트럼을 가지는 SFM 펄스에 비해 잔향환경에서 탐지 성능이 저하된다. 본 논문에서는 GSFM 펄스의 파라미터 ${\rho}$를 적절히 변화시켜 SFM 펄스의 잔향 제거 성능과 GSFM 펄스의 거리 분해능 성능 간에 트레이드오프(Trade-off)관계를 분석하고, 비교적 높은 성능을 동시에 만족할 수 있는 ${\rho}$ 값을 제안하였다. 제안한 GSFM 펄스의 성능을 검증하기 위해 잔향환경을 모의하여 시뮬레이션을 수행하였으며, 제안한 GSFM 펄스가 저속의 도플러 표적을 탐지하면서 우수한 거리 분해능을 가지는 것을 확인할 수 있었다.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.566-569
• /
• 2010

This paper describes the sinusoidal, pulse, triangular oscillator using second generation current conveyor. To obtain the sinusoidal waveform the circuit blocks are constructed by using all pass filter and integrator. The pulse and the triangular waveforms are obtained from the output of sinusoidal oscillator. The peak-to-peak voltages of sinusoidal and triangular waveforms can be easily controlled by the dc offset voltage. Also the output frequency of the oscillator can be controlled by varying passive elements. The designed circuit is verified by HSPICE simulation.

• 한국통신학회논문지
• /
• 제27권3A호
• /
• pp.196-204
• /
• 2002

STC(Sinusoidal Transform Coding) 방식은 주파수 영역에서 음성신호의 스펙트럼 피크치들을 정현파로 모델링하여 합성하는 음성부호화 방식을 말한다. 저전송률 STC 방식에서는 스펙트럼의 모든 피크를 이용하는 대신, 기본 주파수와 고조파에 해당하는 스펙트럼 포락선에서의 크기와 그때의 위상을 이용하여 음성을 합성한다. 본 논문에서는 정현파 모델에 기반한 2.4kbps 음성부호화 알고리즘을 제안한다. 피치정보는 모든 스펙트럼 피크를 사용한 합성음과 선택된 주파수와 고조파를 이용한 합성음과의 평균자승에러를 이용하여 추정하고, 위상정보는 여기신호 펄스의 시작시기를 나타내는 onset time과 성도 모델 전달함수의 위상을 이용하여 얻는다. 크기정보는 SEEVOC 알고리즘과 선형예측계수를 이용하여 추정한다. 실험결과, 합성음의 스펙트럼 특성은 원음성의 포만트 정보를 대부분 가지고 있으며, 위상정보도 원음성의 위상을 잘 따라감을 확인하였다. 합성음의 음질평가를 위해서 informal한 MOS(Mean Opinion Score) 테스트를 시행하였으며, 2.0kbps의 HVXC와 비교하여 대체적으로 MOS 3.1 이상의 음질을 얻을 수 있었다.