• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1175-1187
• /
• 1997

Densification behavior and grain growth of zirconia powder compacts are investigated under high temperature. Experimental data are obtained for zirconia powder under pressureless sintering, sinter forging and hot isostatic pressing. The constitutive equations by Kwon et al. are used for diffusional creep and grain growth. The constitutive equations by McMeeking and co-workers are also included to study the effect of power-law creep. These constitutive equations are implemented into a finite element program (ABAQUS) to investigate the friction effect during sinter forging and the canning effect during hot isostatic pressing. The agreements between experimental data and finite element results are very good in pressureless sintering and hot isostatic pressing, but not as good in sinter forging.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2182-2195
• /
• 1996

Densification characteristics and behavior of tool steel powder compact during high temperature forming processes were investigated under pressure less sintering, sinter forging and hot isostastic pressing. In pressureless sintering, full density was obtained at a closely controlled temperature near the solidus of the material. Finite element calculations from constitutive model for densification by power law creep and diffusional flow were compared with experimental data. Agreements between theoretical calculations and experimental data were good in hot isostatic pressing but not as good in sinter forging.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.544-550
• /
• 1995

In this paper, the anode for molten carbonate fuel cell have been prepared by doctor blade method and microstructure, pore distribution, sintering test of the electrode were investigated. Component analysis were done by Scanning Electron Micrograph, porosimeter and sintering test apparatus. As a result, median pore size was 11.mu.m order at the major specimen and porosity was about 70%. And thickness loss of the electrode was 1.5% at Ni-10Co anode after sintering test.

• 한국수소및신에너지학회논문집
• /
• 제13권1호
• /
• pp.24-33
• /
• 2002

기존 Ni-10w/o Cr 연료극과 성능은 대등하면서 creep 저항성이 뛰어난 연료극을 제조하기 위하여 Ni-5w/o Al 합금 연료극의 제조 공정을 연구하였다. 소성 분위기에 따라 완전산화 방법과 부분산화 방법으로 나누어 제조된 전극들의 미세구조 변화를 관찰하였으며, 실험 결과 부분산화 방법으로 제조한 Ni-5w/o Al 합금 연료극이 가장 우수한 소결 및 creep 저항성을 나타내었다. 이는 연료극이 산화물 분산강화 구조를 갖기 때문으로 부분산화 방법으로 제조한 Ni-5w/o Al 합금 연료극을 장착한 단전지의 경우 기계적 안정성 및 전극 안정성이 향상되었다.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.347-358
• /
• 1994

Creep densification and grain growth of alumina powder compacts during high temperature processing were investigated. The creep densification and grain growth of alumina powder compacts during various sintering processes were analyzed by employing the consitutive model by Kwon and Kim. Theoretical results from the constitutive model were compared with various experimental data of alumina powder compacts in the literature including pressureless sintering, sinter forging and hot pressing. The proposed constitutive equations were implemented into finite element analysis program (ABAQUS) to simulate densification for more complicated geometry and loading conditions. The effects of friction between die and powder compact or punch and powder compact during sinter forging and hot pressing are investigated by using the finite element method. Also, high temperature forming processing of alumina compact with complicated shape was simulated.

• 에너지공학
• /
• 제2권3호
• /
• pp.293-299
• /
• 1993

용융탄산염연료전지(MCFC)용 다공성 Ni 양극에 3~10 wt% Al를 첨가하여 tape casting 법으로 제조된 Ni-Al 양극의 전기화학적성능 및 구조적안정성이 조사되었다. 본 연구에서 제조된 양극의 전기화학적 성능이 $650^{\circ}C$, MCFC 양극분위기(80% H$_2$＋20% $CO_2$)를 모사한 half-cell 에서 양분극 특성으로 평가되었는데, 전류밀도 150 ㎃/$\textrm{cm}^2$ 에서의 분극전압은 약 100 ㎷로 실용전지의 양극으로서 가능성을 보였다. Ni-Al 양극의 소결과 creep에 대한 저항성은 Ni 양극에 비해 증가되었는데, 이는 Ni 입자 표면에 형성된 $Al_2$O$_3$의 영향으로 판단되었다.

• 한국재료학회지
• /
• 제8권12호
• /
• pp.1133-1137
• /
• 1998

MCFC(Molten Carbonate Fuel Cell) 작동온도인 $650^{\circ}C$에서 Ni 음극의 Creep 및 소결에 대한 저항성을 개선시키고자 Ni-W(WC) 복합재료를 기계적 합금법으로 제조하였다. 기계적 합금화한 분말의 XRD분석결과 밀링시간이 증가함에 따라 재료의 규칙적인 결정이 파괴되어 비정질화 되어가는 경향을 보였다. 소결은 $1280^{\circ}C$의 수소분위기에서 10시간 행하였다 소결된 시편의 dot-mapping 및 TEM 분석결과 Ni-W 계면에서의 2차상 관찰되지 않았으나 $0.1\mu\textrm{m}$ 이하의 W이 Ni 기지내에 미세하고 균일하게 분포되어 있는 것으로 나타났다. 이와같이 미세하고 균일하게 분포되어 있는 W은 고용강화 및 분산강화 효과를 통하여 Ni음극의 기계적 특성을 향상시킬 것으로 기대된다.

• 한국분말재료학회지
• /
• 제4권2호
• /
• pp.90-99
• /
• 1997

Densification behavior and grain growth of tool steel powder compacts during pressureless sintering, sinter forging, and hot isostatic pressing were investigated. Experimental data were compared with results of finite element calculations by using the constitutive model of Abouaf and co-workers and that of McMeeking and co-workers. Densification and deformation of tool steel powder compacts were studied by implementing power-law creep, diffusional creep, and grain growth into the finite element analysis. The shape change of a powder compact in the container during hot isostatic pressing was also studied. The theoretical models did not agree well with experimental data in sinter forging, however, agreed well with experimental data in hot isostatic pressing.

• 한국표면공학회지
• /
• 제40권3호
• /
• pp.131-137
• /
• 2007

The typical MCFC (molten carbonate fuel cell) anode is made of Ni-10%Cr alloy. The work of this paper is focused concerning long life of anode because Ni-10% Cr anode is suffering from sintering and creep behavior during cell operation. Therefore, Ni-coated Alumina powder($20{\mu}m$) was developed by electroless nickel plating. Optimum condition of electroless nickel coation on $20{\mu}m$ alumina is as follows: pH 11.7, temperature $65{\sim}80^{\circ}C$, powder amount $100cm^2/l$. The deposition rate for Ni-electroless plating was as a function of temperature and activation energy was evaluated by Arrhenius Equation thereby activation energy calculated slope of experimental data as 117.6 kJ/mol, frequency factor(A) was $6.28{\times}10^{18}hr^{-1}$, respectively.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.205-209
• /
• 2010

In the last (fourth) section, the discussion will entail a silicon-nitride/silicon-carbide nanocomposite, produced by pyrolysis of liquid polymer precursors, demonstrating one of the lowest creep rates reported so far in ceramics at the comparable temperature of $1400^{\circ}C$. This was first achieved by avoiding the oxynitride glass phase at the intergrain boundaries. One important factor in the processing of these nanocomposites was the use of the electrical field assisted sintering method.