• The Journal of Asian Finance, Economics and Business
• /
• 제8권10호
• /
• pp.197-205
• /
• 2021

This study aims to investigate factors influencing customer behavior towards nylon bags and single-use plastics. These factors are environmental protection awareness, health protection awareness, sense of responsibility, expectations, and green marketing. A quantitative method with the use of surveys is deployed to collect data of young people under 30, generating 1650 valid responses. The collected data is then analyzed with SPSS 22, using Cronbach's Alpha and Exploratory Factor Analysis to test the reliability of the model before validating the hypotheses by regression analysis. The study found that the majority of respondents are inclined to use plastic bags, despite their environmental awareness. The results also demonstrate that health consciousness, environmental concerns, self-driven responsibility for the sustainability of young people have a significant impact on their behaviors in using nylon bags and plastic products, whereas expectation and green marketing are confirmed not to be the factors. The study suggests that if green marketing is to gain higher influence, an increase in research and development to support other environmentally friendly packaging would be the right path. Finally, this research proposes some feasible recommendations for the government, which include imposing bolder and more targeted environmental policies on consumers and introducing educational campaigns to raise awareness about minimizing plastic consumption.

• 통합자연과학논문집
• /
• 제13권4호
• /
• pp.158-169
• /
• 2020

Modern people live in the age of plastics. It has been widely used due to its easy molding processing, mass production, and excellent durability. However, over-produced plastics for convenience cause plastic disasters and adversely affect the ecosystem. Since the COVID-19 outbreak, the use of single-use plastic waste due to the use of delivery services has increased. The COVID-19 pandemic has caused a plastic pandemic. Currently, domestic recycling policies depend only on recycling collection companies and market prices of recyclable resources. This paper confirms whether the outbreak of COVID-19 has affected the price of plastic waste. It also shows that the price of plastic waste is more unstable than metals with a high recycling rate. This urges businesses to share the cost of recycling on plastic waste, no longer being dependent on market prices for recyclable resources.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1216-1224
• /
• 1996

In the use of glass fiber reinforced plastics it is often necessary to cutting the components, but the cutting GFRP is often made difficult by the delamination of composites and the short tool life. In this paper, the machinability of GFRP by mean of tool materials and type was experimentally investigated. By proper selection of cutting tool material and type excellent machining of this workpiece is achieved. The surface quality relate closely with the feed rate and cutting tools.

• 한국포장학회지
• /
• 제29권2호
• /
• pp.95-102
• /
• 2023

실내마스크 착용 해제 및 거리 두기 완화에도 불구하고 비대면 서비스가 계속되어 이루어지고 있다. 특히 음·식료품을 비롯한 농·축·수산물의 배송 수요는 증가하고 있어 이에 부가되는 플라스틱 포장 폐기물의 양이 꾸준히 증가하는 추세이다. 이에 따라 EU에서는 포장재 플라스틱의 사용을 규제하려는 방향으로 움직임을 보였다. 이러한 국제 트렌드의 흐름에 대응하여 국내 패키징 업계에서는 PLA, PBAT와 같은 생분해성 물질을 이용한 친환경 포장재 개발 연구를 활발히 진행하고 있다. 본 연구에서는 이러한 이슈에 대응하여 국내 가로수 중 상당 비중을 차지하여 식재된 은행나무의 은행잎을 lactic acid 생산에 관한 새로운 원료로 활용하고자 하였다. 은행잎은 cellulose, mannan, xylan 등의 다당류를 함유하고 있으며 대량의 원료를 얻을 수 있다는 유용한 특징이 있다. 본 연구를 통해 전처리한 은행추출부산물의 glucan은 단일 분획 공정으로는 높은 수율을 기대하기 어렵다고 판단되어지며, 낮은 수욜 문제를 해결하기 위해서는 전처리 가수분해액, 효소당화액을 모두 활용하는 통합 공정이 필수적으로 적용되어야 한다.

• Advances in concrete construction
• /
• 제16권1호
• /
• pp.35-57
• /
• 2023

Majority of the plastic produced each year is being disposed in land after single-use, which becomes waste and takes up a lot of storage space. Therefore, there is an urgent need to find alternative solutions instead of disposal. Recycling and reusing the PET plastic waste as aggregate replacement and fiber in concrete production can be one of the eco- friendly methods as there is a great demand for concrete around the world, especially in developing countries by raising human awareness of the environment, the economy, and Carbon dioxide (CO2) emissions. Self-compacting concrete (SCC) is a key development in concrete technology that offers a number of attractive features over traditional concrete applications. Recently, in order to improve its durability and prevent such plastics from directly contacting the environment, various kinds of plastics have been added. This review article summarizes the latest evident on the performance of SCC containing recycled PET as eco-friendly aggregates and fiber. Moreover, it highlights the influence of substitution content, shape, length, and size on the fresh and properties of SCC incorporating PET plastic. Based on the findings of the articles that were reviewed for this study, it is observed that SCC made of PET plastic (PETSCC) can be employed in construction era owing to its acceptable mechanical and fresh properties. On the other hand, it is concluded that owing to the lightweight nature of plastic aggregate, Reusing PET waste in the construction application is an effective approach to reduces the earthquake risk of a building.

• 비파괴검사학회지
• /
• 제19권6호
• /
• pp.439-447
• /
• 1999

복합재료-금속 접착접합부가 사용 중 반복하중을 받을 때 발생하는 피로손상을 실시간에 평가할 수 있는 기법으로 음향초음파(acousto-ultrasonics; AU)법을 채택하였으며, 피로시험 중의 단일겹치기(single-lap) 및 이중겹치기 (double-lap) 평판형 시험편에서 취득한 신호로부터 계산된 음향초음파변수(acousto-ultrasonic parameters: AUP)와 피로손상도 사이의 상관관계를 나타내는 곡선을 얻을 수 있었다. 곡선은 피로손상에 의한 고분자기지 복합재료의 강성율 저하($E/E_o$)를 나타내는 곡선과 매우 유사하며, 이를 바탕으로 피로손상도의 실시간 예측이 가능하다. 다만 단일겹치기 시험편의 경우에는 Amplitude와 AUP2를, 이중겹치기 시험편의 경우에는 Amplitude와 AUP1을 기준 변수로 채택할 때 보다 일관성 있는 결과를 얻고 있는 점으로부터 실제 구조물에 적용함에 있어서는 각각의 형상에 따른 최적변수를 선택하여 활용해야 할 것으로 사료된다.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.277-299
• /
• 2008

High quality and expedient processing repair methods are necessary to enhance the service life of bridge structures. Deterioration of concrete can occur as a result of structural cracks, corrosion of reinforcement, and freeze.thaw cycles. Cost effective methods with potential for field implementation are necessary to address the issue of the vulnerability of bridge structures and how to repair them. Most infrastructure related applications of fiber-reinforced plastics (FRPs) use traditional hand lay-up technology. The hand lay-up is tedious, labor-intensive and relies upon personnel skill level. An alternative to traditional hand lay-up of FRP for infrastructure applications is Vacuum Assisted Resin Transfer Molding (VARTM). VARTM uses single sided molding technology to infuse resin over fabrics wrapping large structures, such as bridge girders and columns. There is no work currently available in understanding the interface developed, when VARTM processing is adopted to wrap fibers such as carbon and/or glass over concrete structures. This paper investigates the interface formed by carbon fiber processed on to a concrete surface using the VARTM technique. Various surface treatments, including sandblasting, were performed to study the pull-off tensile test to find a potential prepared surface. A single-lap shear test was used to study the bond strength of CFRP fabric/epoxy composite adhered to concrete. Carbon fiber wraps incorporating Sikadur HEX 103C and low viscosity epoxy resin Sikadur 300 were considered in VARTM processing of concrete specimens.

• 농업과학연구
• /
• 제50권4호
• /
• pp.697-711
• /
• 2023

The global waste crisis has been escalating and its consequent impact on soil, water, air pollution, and eventually climate change acceleration has shed light on the importance of reducing waste. Amidst COVID-19 and the following surge in single-use plastics for food delivery, waste generation is on the incline. Companies and governments have embarked on developing various eco-friendly packaging technologies, but their effectiveness on the consumers is vague as definitions of eco-friendly packaging are vague, and research on its link to purchase intention remains scarce. Thus, the adoption of eco-friendly packaging has been slow. To address this issue, this study analyzes the awareness and purchase intention of four visual attributes of eco-friendly packaging-material, verbal statement, eco-label, and color-along with the environmental consciousness among undergraduate university students in Korea through online surveys and the ordered logit regression model. The study distinguished the attributes into evidence-based and conjectural categories. The findings revealed that eco-friendly visual attributes had a positive effect on purchase intention amongst undergraduate students in Korea; however the level of environmental consciousness had marginal effect on the purchase intention of eco-friendly visual attributes. The level of effectiveness also varied with each visual element. Analyses revealed that visual attributes to eco-friendly material had marginal effect on purchase intention; color was deemed not an "Eco-friendly attribute" by most students, and although eco-friendly labels were deemed as an eco-friendly attribute, trust in the labels varied according to environmental consciousness. These findings have implications for businesses and policymakers aiming to promote eco-friendly consumption within packaged food products.

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.255-264
• /
• 2013

$CoAl_2O_4$는 열적 및 화학적으로 매우 안정한 물질이며 독특한 광학적 특성으로 인해 도자기 제품, 유리, 페인트, 플라스틱을 장식하는 세라믹 착색제로 사용되어져 왔다. 본 연구에서는 착체중합법(Polymerized complex method)과 고상합성법(Solid state reaction)을 이용하여 단상의 $CoAl_2O_4$ 청색 무기 안료를 합성하였고, 잉크젯 프린팅용 잉크로의 응용 시 노즐 막힘 및 분산안정성과 같은 문제점을 방지하기 위해 고에너지 밀링 공정 중 하나인 어트리션밀을 이용하여 입자를 미세화하였다. 밀링 공정은 직경 1 mm의 지르코니아 볼을 이용하여 BPR(Ball to powder weight ratio) 100 : 1, 800 rpm의 조건에서 3시간 동안 진행되었다. 합성된 안료는 XRD, FE-SEM, TEM, PSA, 그리고 CIE $L^*a^*b^*$ 측정을 통하여 어트리션밀링 전후의 특성을 분석하였다. XRD 측정 결과 단상의 $CoAl_2O_4$ 청색 무기 안료가 합성되었고, 고에너지 밀링 공정을 통하여 100~200 nm의 입자 크기를 가지는 청색 나노 무기 안료를 얻었다.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.