• Title/Summary/Keyword: Single-stage

Search Result 2,445, Processing Time 0.033 seconds

Effects of irradiation on the calcific nodule formation in MC3T3-El osteoblastic cell line (MC3T3-El 골모세포주의 석회화결절 형성에 방사선이 미치는 영향)

  • Kang Ki-Hyun;Lee Sang-Rae;Kwon Ki-Jeong;Koh Kwang-Joon
    • Imaging Science in Dentistry
    • /
    • v.35 no.1
    • /
    • pp.1-8
    • /
    • 2005
  • Purpose : To investigate the effects of irradiation on the calcium content and calcific nodule formation in the MC3T3-E1 osteoblastic cell line. Materials and Methods : Cells were irradiated with a single dose of 2,4 and 8 Gy at a dose rate of 5.38 Gy/min using a Cs-137 irradiator. After irradiation, the calcium content and calcific nodule formation were examined on the 1 st, 2nd, 3rd and 4th week. Results : A decreasing dose-dependent tendency of the cell proliferation rate was found in all irradiated groups of this experiment when compared with the unirradiated control group. In accordance with the duration of culture, there was no significant difference in the cell proliferation rate after irradiation of 2 Gy when compared with the unirradiated group, however a decreasing tendency was found in 4 Gy- and 8 Gy-irradiated groups. While an increase in total calcium content after irradiation of 2 Gy was found at week 1, week 2, and week 4, there was a decrease in calcium content at week 1 through 4 in the 8 Gy- irradiated group. Calcific nodule formation was increased in irradiated experimental groups when compared with the unirradiated control group in the 2 Gy-irradiated group, but decreased in the 4 Gy- and 8 Gy-irradiated groups at the same stage. Conclusion : The results showed a mild increasing tendency of the calcific nodule formation after irradiation of 2 Gy. However, a decreased calcific nodule formation in 4 Gy- and 8 Gy-irradiated groups was found. Taken together, the irradiation of 2 Gy mildly activated bone formation, however 4 Gy or 8 Gy suppressed bone formation by decreasing cell numbers in the MC3T3-El osteoblastic cell line.

  • PDF

Evaluation of Yield and Quality from Red Pepper for Application Rates of Pig Slurry Composting Biofiltration (고추에서 SCB액비 시용량 설정을 위한 수량 및 품질 평가)

  • Lim, Tae-Jun;Hong, Soon-Dal;Kim, Seung-Heui;Park, Jin-Myeon
    • Korean Journal of Environmental Agriculture
    • /
    • v.27 no.2
    • /
    • pp.171-177
    • /
    • 2008
  • The application in agricultural fields of pig slurry composting biofiltraton amending smell and nutrient unevenness, it is important for the appropriate nitrogen nutrient management to promote the availability of the crops and to minimize the risk of adversely environmental effects. The objective of this study was to determine the application rates of the preplant pig slurry composting biofiltration for red pepper(Capsicum annuum L.) by considering the yield response and the fruit quality such as sugar, capsaicinoid content. Red peppers were grown on plastic film ground under five different pig slurry(PS) application rates and mineral fertilizer(MF 100%) as a control. The effects of a single application of five different doses of PS: PS 0%(no kg N $ha^{-1}$), PS 50%(51.5 kg N $ha^{-1}$), PS 75%(77.3 kg N $ha^{-1}$), PS 100%(103 kg N $ha^{-1}$) and PS 125%(129 kg N $ha^{-1}$) were compared with the recommended mineral treatment(103 kg N $ha^{-1}$) in the pre-planting. The sidedressing N application(87 kg N $ha^{-1}$) was applied to the mineral fertilizer in all treatments. Red peppers were harvested at the mature red stage through five times from 72 days after transplanting(DAT) to 133 DAT. The results indicated that the yield of red pepper was increased with the increase of the N application rates from PS 0% to PS 100%. The highest yield was obtained in PS 100% by 20,843 kg $ha^{-1}$, although there were no significant differences in yield among PS 100, PS 125% and MF 100%. In addition, The contents of soluble sugar and capsaicinoids were not significantly different in all treatments. Accordingly, fertilization recommendations of red pepper to substitute PS for the mineral fertilizer were considered to PS 100%.

4-Channel 2.5-Gb/s/ch CMOS Optical Receiver Array for Active Optical HDMI Cables (액티브 광케이블용 4-채널 2.5-Gb/s/ch CMOS 광 수신기 어레이)

  • Lee, Jin-Ju;Shin, Ji-Hye;Park, Sung-Min
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.49 no.8
    • /
    • pp.22-26
    • /
    • 2012
  • This paper introduces a 2.5-Gb/s optical receiver implemented in a standard 1P4M 0.18um CMOS technology for the applications of active optical HDMI cables. The optical receiver consists of a differential transimpedance amplifier(TIA), a five-stage differential limiting amplifier(LA), and an output buffer. The TIA exploits the inverter input configuration with a resistive feedback for low noise and power consumption. It is cascaded by an additional differential amplifier and a DC-balanced buffer to facilitate the following LA design. The LA consists of five gain cells, an output buffer, and an offset cancellation circuit. The proposed optical receiver demonstrates $91dB{\Omega}$ transimpedance gain, 1.55 GHz bandwidth even with the large photodiode capacitance of 320 fF, 16 pA/sqrt(Hz) average noise current spectral density within the bandwidth (corresponding to the optical sensitivity of -21.6 dBm for $10^{-12}$ BER), and 40 mW power dissipation from a single 1.8-V supply. Test chips occupy the area of $1.35{\times}2.46mm^2$ including pads. The optically measured eye-diagrams confirms wide and clear eye-openings for 2.5-Gb/s operations.

Vascular Endothelial Growth Factor (VEGF) Gene Polymorphisms and Breast Cancer Risk in a Chinese Population

  • Luo, Ting;Chen, Long;He, Ping;Hu, Qian-Cheng;Zhong, Xiao-Rong;Sun, Yu;Yang, Yuan-Fu;Tian, Ting-Lun;Zheng, Hong
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.14 no.4
    • /
    • pp.2433-2437
    • /
    • 2013
  • Vascular endothelial growth factor (VEGF) is a potent regulator of angiogenesis and thereby involved in the development and progression of solid tumours. Associations between three VEGF gene polymorphisms (-634 G/C, +936 C/T, and +1612 G/A) and breast cancer risk have been extensively studied, but the currently available results are inconclusive. Our aim was to investigate associations between three VEGF gene polymorphisms and breast cancer risk in Chinese Han patients. We performed a hospital-based case-control study including 680 female incident breast cancer patients and 680 female age-matched healthy control subjects. Polymerase chain reaction restriction fragment length polymorphism (PCR-RFLP) analysis was performed to detect the three VEGF gene polymorphisms. We observed that women carriers of +936 TT genotypes [odds ratio (OR) =0.46, 95% confidence interval (CI) = 0.28, 0.76; P=0.002] or 936 T-allele (OR=0.81, 95% CI= 0.68, 0.98; P=0.03) had a protective effect concerning the disease. Our study suggested that the +1612G/A polymorphism was unlikely to be associated with breast cancer risk. The -634CC genotype was significantly associated with high tumor aggressiveness [large tumor size (OR=2.63, 95% CI=1.15, 6.02; P=0.02) and high histologic grade (OR=1.47, 95% CI= 1.06, 2.03; P=0.02)]. The genotypes were not related with other tumor characteristics such as regional or distant metastasis, stage at diagnosis, or estrogen or progesterone receptor status. Our study revealed that the VEGF -634 G/C and +936 C/T gene polymorphisms may be associated with breast cancer in Chinese Han patients.

A Study on Implementing a Cooperative Urban Planning: A Case of Wisconsin in U.S.A. (협력적 계획의 실행에 관한 연구: 미국 위스콘신을 사례로)

  • Kim, Ryoon-Hee;Choi, Sang-Hee;Wang, Kyung-Soon;Kim, Doo-Hwan;Yoon, In-Sook
    • Land and Housing Review
    • /
    • v.5 no.2
    • /
    • pp.57-68
    • /
    • 2014
  • As social needs are increasing to minimize the occurrence of external effect due to urban development and to diffuse the benefits of development to surrounding areas, diverse cooperative planning methods are increasingly being discussed. In the long term, laws and systems need to be refined to support cooperative planning, but prior to such development, elements, procedures, and methodologies wherein cooperative planning in U.S.A cases could be implemented were examined to derive the alternative to and implications of cooperative planning that can apply not only to single administrative districts but also to complex boundary new towns being developed by various local governments. This paper surveyed and analyzed the cases of Wisconsin State of the U.S.A, thereby deriving the following implications. First, joint planning areas should be established within the boundary area of various local governments to establish cooperative planning areas in special areas such as complex boundary new towns, and to this end, urban planning means should be prepared. Together with such efforts, to boost the flexibility of cooperative planning, life sphere unit-based planning unit should be established, and a well-organized operation system to activate communities should be prepared. Also, revenues, generated through regional growth, should be distributed to individual local governments through joint tax according to the agreed-upon ratios, and as such, measures to share services and operate joint tax in small-size regions should be secured. Together with such efforts, to establish cooperative governance, measures to manage conflicts through the participation by stakeholders and arbitrators should be prepared from the planning stage, and measures for implementing cooperative planning at the level of basic urban planning should be prepared.

Effect of Salt on Crystal Growth of Plate-like Alumina Particles by Molten-salt Method (Molten-salt 방법에 의해 합성되는 판상형 알루미나 분말의 입성장 거동에 미치는 Salt의 영향)

  • Kim, Bo Yeon;Lee, Yoon Joo;Shin, Dong-geun;Kim, Soo Ryong;Kwon, Woo Teck;Kim, Younghee;Choi, Duck Kyun
    • Korean Chemical Engineering Research
    • /
    • v.53 no.5
    • /
    • pp.603-608
    • /
    • 2015
  • Alumina powder have been expanded its application in industry and required to control its morphology such as powder size and aspect ratio of single particle. It can be synthesized by molten - salt method which is possible to obtain various shapes of ceramic particles by controlling the growth direction because each crystal face has different growth rate. In this study, various combinations of salts such as NaCl, $Na_2SO_4$, $Na_3PO_4$ and their mixture were used for control the growth of plate like alumina particle from the initial stage of synthesis because salt having different ionic strength can control the growth direction of ceramic particle under its melting condition around $800{\sim}900^{\circ}C$, and growth behavior of plate-like alumina particle with different reaction conditions such as temperature and concentration on the crystal size and shape was studied.

The Kinetics of Delignification in Oxygen·Alkali pulping (효소(酵素)·알칼리 증해(蒸解)의 탈(脱)리그닌에 관(関)한 동역학적(動力學的) 분석(分析))

  • Jo, Byoung Muk;Shin, Dong So
    • Journal of Korean Society of Forest Science
    • /
    • v.56 no.1
    • /
    • pp.26-50
    • /
    • 1982
  • In order to obtain more detailed information concerning the degradation of lignin in the oxygen alkali pulping single stage isothermal delignification of pine wood meal (Pinus koraiensis S. et Z.) was studied in the oxygen alkali system at five temperature level ($110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$, $140^{\circ}C$, $150^{\circ}C$) for 60 min.. The rate constant, activation energy, oxygen and alkali consumption during the oxygen alkali delignification were determined by the kinetic method. The 2/5 of total lignin was eliminated at the start of the reaction. The delignification rate constant was about 3 times that of caustic soda pulping. The activation energy was about 1/3 lower than in caustic soda pulping. Like oxygen consumption, alkali consumption was also rapid early at the reaction and almost ceased after about 10 min.. The degradation reaction of lignin was strongly dependent upon the pH decrease of the cooking liquor by organic acid generated in pulping. The lignin in the oxygen alkali pulping degraded into lover molecular weight and had more hydrophillic properties. The methoxyl group decreased considerably at the first of oxygen alkali delignification, while the carbonyl, carboxyl and phenolic hydroxyl group increased rapidly.

  • PDF

Non-gaseous Plasma Immersion Ion Implantation and Its Applications

  • Han, Seung-Hee;Kim, En-Kyeom;Park, Won-Woong;Moon, Sun-Woo;Kim, Kyung-Hun;Kim, Sung-Min
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.151-151
    • /
    • 2012
  • A new plasma process, i.e., the combination of PIII&D and HIPIMS, was developed to implant non-gaseous ions into materials surface. HIPIMS is a special mode of operation of pulsed-DC magnetron sputtering, in which high pulsed DC power exceeding ~1 kW/$cm^2$ of its peak power density is applied to the magnetron sputtering target while the average power density remains manageable to the cooling capacity of the equipment by using a very small duty ratio of operation. Due to the high peak power density applied to the sputtering target, a large fraction of sputtered atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed plasma of sputtered target material by HIPIMS operation, the implantation of non-gaseous ions can be successfully accomplished. The new process has great advantage that thin film deposition and non-gaseous ion implantation along with in-situ film modification can be achieved in a single plasma chamber. Even broader application areas of PIII&D technology are believed to be envisaged by this newly developed process. In one application of non-gaseous plasma immersion ion implantation, Ge ions were implanted into SiO2 thin film at 60 keV to form Ge quantum dots embedded in SiO2 dielectric material. The crystalline Ge quantum dots were shown to be 5~10 nm in size and well dispersed in SiO2 matrix. In another application, Ag ions were implanted into SS-304 substrate to endow the anti-microbial property of the surface. Yet another bio-application was Mg ion implantation into Ti to improve its osteointegration property for bone implants. Catalyst is another promising application field of nongaseous plasma immersion ion implantation because ion implantation results in atomically dispersed catalytic agents with high surface to volume ratio. Pt ions were implanted into the surface of Al2O3 catalytic supporter and its H2 generation property was measured for DME reforming catalyst. In this talk, a newly developed, non-gaseous plasma immersion ion implantation technique and its applications would be shown and discussed.

  • PDF

Lack of Influence of the SMAD7 Gene rs2337107 Polymorphism on Risk of Colorectal Cancer in an Iranian Population

  • Akbari, Zahra;Safari-Alighiarloo, Nahid;Haghighi, Mahdi Montazer;Vahedi, Mohsen;Mirtalebi, Hanieh;Azimzadeh, Pedram;Milanizadeh, Saman;Shemirani, Atena Irani;Nazemalhosseini-Mojarad, Ehsan;Aghdaei, Hamid Asadzadeh;Zali, Mohammad Reza
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.11
    • /
    • pp.4437-4441
    • /
    • 2014
  • SMAD7 has been identified as a functional candidate gene for colorectal cancer (CRC). SMAD7 protein is a known antagonist of the transforming growth factor beta ($TGF-{\beta}$) signaling pathway which is involved in tumorigenesis. Polymorphisms in SMAD7 may thus alter cancer risk. The aim of this study was to investigate the influence of a SMAD7 gene polymorphism (rs2337107) on risk of CRC and clinicopathological features in an Iranian population. In total, 210 subjects including 105 patients with colorectal cancer and 105 healthy controls were recruited in our study. All samples were genotyped by TaqMan assay via an ABI 7500 Real Time PCR System (Applied Biosystems) with DNA from peripheral blood. The polymorphism was statistically analyzed to investigate the relationship with the risk of colorectal cancer and clinicopathological properties. Logistic regression analysis revealed that there was no significant association between rs2337107and the risk of colorectal cancer. In addition, no significant association between genotypes and clinicopathological features was observed (p value>0.05). Although there was not any association between genotypes and disorder, CT was the most common genotype in this population. This genotype prevalence was also higher in the patients with well grade (54.9%) and colon (72.0%) tumors. Our results provide the first evidence that this polymorphism is not a potential contributor to the risk of colorectal cancer and clinicopathological features in an Iranian population, and suggests the need of a large-scale case-control study to validate our results.

Fabrication and Evaluation of High Frequency Ultrasound Receive Transducers for Intravascular Photoacoustic Imaging (혈관내 광음향 영상을 위한 고주파수 초음파 수신 변환기 제작 및 평가)

  • Lee, Jun-Su;Chang, Jin Ho
    • The Journal of the Acoustical Society of Korea
    • /
    • v.33 no.5
    • /
    • pp.300-308
    • /
    • 2014
  • Photoacoustic imaging is a useful tool for the diagnosis of atherosclerosis because it is capable of providing anatomical and pathological information at the same time. A photoacoustic signal detector is a pivotal element to achieve high spatial resolution, so that it should have broadband spectrum with a high center frequency. Since a photoacoustic imaging probe is directly inserted into blood vessel to diagnose atherosclerosis, the total size of the photoacoustic signal detector should be less than 1 mm. The main purpose of this paper is to demonstrate that PVDF can be used as an active material for the photoacoustic signal detector with a high frequency and broadband characteristic. The photoacoustic signal detector developed in this study was a single element ultrasound transducer with an aperture of $0.5{\times}0.5mm$ and the total size of 1 mm. In the design stage, the natural focal depth was adjusted for an effective focal area to cover the region of interest, i.e., 1~5 mm in depth. This was because geometrical focusing could not be used due to the small aperture. Through a pulse-echo test, it was ascertained that the developed photoacoustic signal detector has the -6 dB bandwidth ranging between 40.1 and 112.8 MHz and the center frequency of 76.83 MHz.