• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.913-918
• /
• 2000

Spray and combustion characteristics were investigated to find suitable injection pressure by using ultra high pressure injection and single shot diesel combustion systems. As injection pressure was increased, spray penetration and spray angle were increased continuously until 2,000bar, but after this injection pressure region the rate of increase was decreased suddenly. Combustion characteristics were also enhanced until 2,000bar of injection pressure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.298-298
• /
• 2004

본 연구는 외부에서 고 농도 (30％)의 산소 공급이 공간 인지 능력에 어떠한 변화를 유발하는지 뇌기능 영상의 시계열 신호 분석을 통해 관찰하고자 한다. 8명의 오른손잡이 남자 대학생 (평균 23.5세)이 피험자로 참여하였다. 21％와 30％ 산소 농도를 각각 BL/min의 양으로 일정하게 공급할 수 있는 장치를 개발하였다. 공간 인지 능력 측정을 위해 20 문항을 포함하는 두 개의 문제지를 제작하였고, 과제 수행 결과로부터 정답률을 산출하였다. 3T MRI 기기를 사용하였고, single-shot EPI 방법으로 뇌기능 영상을 획득하였다.(중략)

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.31-38
• /
• 1992

The objective of this study is to determine the ignition feasibility of a single shot, air-assisted gasoline fuel injector operated in a constant volume combustion chamber under atmospheric condition. A number of parameters has been selected for this experiments, such as dwelling time, spark gap position(r,z), spark electrode geometry, supplied air and fuel masses and spray cone deflector angle. On-site visual inspection of the instantaneous flame glow was chosen as one way to judge the successful ignition. In addition, chamber pressure and occasional photography were mobilized as for data recording. It was clearly observed that there was an entrainment air-fuel mixture toward spray axis from the spray formation and its development later on. The optimum ignition conditions were found for those parameters given above.

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.159-162
• /
• 2002

We tried to obtain an initial velocity model for prestack depth migration via waveform inversion. For application of any field data we chose a smooth background layered velocity model (v=v0 + k x z) as an initial velocity model. Newton type waveform inversion needs to invert huge Hessian matrix. In order to compute full Hessian matrix arising from full aperture data and full illumination zone, we meet insurmountable difficulties of paying astronomical computing cost. For the layered media, approximate Hessian emerging from single shot aperture data can be used repeatedly for split spread source configuration. In our work of using this Hessian characteristic of layered media we attempted to obtain the approximate velocity model as close as possible to the true velocity model in first iteration.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1864-1866
• /
• 1997

In this study, we designed the pulse superposition network consisting of a six-mesh and a three-mesh network, and fabricated the electrical power supply and the single elliptical resonator. We have developed a tec.bnique forming the step-pulse shape of pulsed Nd:YAG laser by using one shot multivibrater and have studied on the effect of two pulses superposition for the output and efficiency improvement of pulsed Nd:YAG laser by superposing a sinusoidal pulse on a main pulse.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.1-4
• /
• 1997

The theoretical limit of the noise correlation between the signal and idler outputs of a nondegenerate optical parametric amplifier (NOPA) with a coherent state signal and vacuum state idler input can be enhanced if a non-vacuum coherent state idler input is employed. By choosing a balanced signal and idler input, the noise correlation is $1/{({\root}g + {\root}{g-1})}^2$, where g is the intensity gain of the NOPA, and that is superior to the prediced outputs with single signal input by approximately 3dB. The result is applicable to all the schemes that use the NOPA to produce a sub-shot noise light generation such as feed-back or feed-forward control.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.378-381
• /
• 2009

As a Joule-heat source, a conductive Mo layer was used to crystallize amorphous silicon for AMOLED backplanes. This Joule-heating induced crystallization (JIC) process could produce poly-Si having a grain size ranging from tens of nanometers to greater than several micrometers. Here, the blanket (single-shot whole-plane) crystallization could be achieved on the $2^{nd}$ and the $4^{th}$ generation glass substrate.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.86-86
• /
• 2002

Purpose： To evaluate the white matter fiber configuration in various developmental CNS anomaly 대상 및 방법： Jubert Syndrome, congenital schizencephaly, callosal agenesis and hemiplegic cerebral palsy patients were evaluated by diffusion tensor MRI. All studies were performed using a 1.5T Philips Gyroscan Intern system. Diffusion weighted imaging was performed using single-shot echo planar imaging, with navigator echo phase correction and SENSE. Diffusion weighting was performed along six independent axes, using diffusion weighting of b=600s/$\textrm{mm}^2$. 128 matrix/zero filled to 256, 23cm FOV, 3mm slice thickness were used for imaging parameters. Data were processed on a Window-2000 PC equipped with IDL and PRIDE (Philips Medical System).

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.84-84
• /
• 2002

목적： 야간성 전두협 발작 (Nocturnal frontal lobe epilepsy NFLE)은 임상적으로 특징적인 야간성 운동성 발작으로 잘 알려져 있지만 일반적인 MR 영상에서는 대부분에서는 특이한 소견을 보이지 않아 확산 텐서 영상 (DTI)에서의 이상 소견 발현 유무를 알아보고자 한다. 대상 및 방법： 임상적 소견과, EEG 소견으로 진단된 NFLE 환자 6명을 대상으로 DTI 영상을 촬영하였다. 남자 2명, 여자 4명으로 평균연령은 32세 이었다. DTI영상은 single shot spin echo EPI 펄스 열을 사용하였고 사용한 영상 변수는 b value는 0, 1000 s/$\textrm{mm}^2$, TR 10000 msec, TE 71.8/72.3 msec, matrix 128$\times$128 (256 reconstruction), FOV 23cm, 5mm thickness, 2mm interstice gap, NEX 1. 19 slices, time은 4min 21sec (25방향) 이었다. 대조군으로 정상 성인 10명 (평균연령 31세)에서 동일한 방법으로 DTI 영상을 시행하여 분할 비등방도 (fractional anisotropy) 영상을 얻고 전두엽 백질에서 분할 비등방도 값을 측정하여 NFLE 환자군과 비교하였다.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.83-83
• /
• 2002

목적： 현재 임상적으로 사용되고 있는 확산경사자장의 세기 이상( > 1200)의 강한 확산 경사자장이 가해진 경우 뇌구조물들의 확산계수값을 조사하고 고자장(Bo = 3T)에서 이러한 강한 확산 경사자장을 이용하는 경우 1.5T에서 시행하는 경우와의 차이점을 비교 연구해보고자 하였다. 대상 및 방법： 정상 성인 3명을 대상으로 b-value를 0부터 3500까지 변화시키며 확산강조영상을 최대경사자장 40 mT/m, slew rate 150 T/m/s의 경사자장계가 장착된 3T MR scanner (General Electric, USA)에서 획득하였다. 사용한 펄스열은 Stejskal-Tanner type의 확산강조 경사자장이 포함된 single-shot SE EPI를 사용하였으며 영상획득시 사용한 파라미터는 다음과 같다. TR/TE= 10000/95.1, Thickness/space=512mm, FOV=24$\times$21cm, Matrix=128$\times$128, NEX=1 뇌구조물들에 관심 영역을 설정하고 b-value에 따른 신호감소를 측정하였다. 측정된 데이터를 hi-exponential decay 모델을 이용하여 분석하였다.