• 대한토목학회논문집
• /
• 제28권1C호
• /
• pp.31-40
• /
• 2008

본 연구에서는 지진하중을 받는 Single Column/Shaft의 내진해석으로 의사정적해석법을 적용하였으며 해석상에서 지반의 비선형 거동특성을 나타내는 다양한 수평방향 하중전이특성(p-y 곡선, Bi-linear 곡선)를 이용하여 지반-말뚝의 상호작용을 고려하였다. 비선형 지반모델을 적용한 해석은 지반-말뚝 시스템의 지진거동을 간편히 예측할 수 있었으며 동일한 해석조건에서 응답변위법에 의한 Single Column/Shaft의 수평거동이 진도법에 근거하여 산정한 해석결과보다 크게 예측되었다. 두부경계조건과 상대강성이 Single Column/Shaft의 단면력에 미치는 영향을 분석하기 위해 다양한 지반모델에 대한 변수연구를 수행한 결과, 두부경계가 고정이고 말뚝강성이 감소할수록 수평변위가 작은 것으로 나타났으며, JRA의 Bi-linear 지반모델을 적용한 해석은 Single Column/Shaft의 수평거동을 비교적 정확히 예측하였다.

• 인터넷정보학회논문지
• /
• 제24권1호
• /
• pp.9-15
• /
• 2023

SPA(Single-Page Application)는 RESTful API와 통신을 위해 데이터의 변환을 필요로 한다. BFF(Backend for Frontend) 패턴은 이 변환을 서버에서 처리하고 있으나 통신 횟수를 증가시키고 개발과 배포를 어렵게 하는 문제가 있다. 본 연구에서는 SPA의 ViewModel과 RESTful API의 모델을 SPA에서 직접 매핑하는 아키텍처를 제안한다. 제안한 아키텍처는 RESTful API의 문서 모델인 OpenAPI 사양을 이용하여 RESTful API 모델과 ViewModel 간의 매핑 모델을 자동 생성한다. SPA의 통신 컴포넌트는 생성된 모델을 이용하여 RESTful API 데이터와 ViewModel을 자동 변환한다. 사례 연구를 통해 기존 BFF 방식과 비교한 결과 제안한 아키텍처는 BFF에 비해 높은 개발 생산성을 보였고 부하테스트 결과 BFF에 비해 약 6 %이상 낮은 서버 CPU 점유율을 기록하였다.

• 한국대기환경학회지
• /
• 제18권6호
• /
• pp.437-452
• /
• 2002

The Metropolitan Tracer Experiment (METREX) was performed over the Washington, D.C. area using two inert, non-deposition perfluorocarbon gases for over 1 year period (November 1983∼December 1984). Two perfluorocarbon gas tracers (PDCH, PMCH) were released simultaneously at intervals of every 36 hours for 6 hours, regardless of the meteorological conditions in metropolitan area. Samples were collected continuously for 8 hours at a central downtown and two adjacent suburban locations. Monthly air samples were collected at 93 sites across the whole region (at urban, suburban, and rural locations). The purpose of this study is to simulate INPUFF and ISCST model using METREX data, and to compare calculated and observed concentrations. In the case of INPUFF simulation, two meteorological input data were used. One is result data from wind field model which was calculated by diagnostic wind model (DWM), the other is meteorological data observed at single station. Here, three kinds of model calculation were performed during April and July 1984; they include (1) INPUFF model using DWM data (2) INPUFF model using single meteorological data (3) ISCST model. The monthly average concentration data were used for statistic analysis and to draw their horizontal distribution patterns. Eight-hour-averaged concentration was used to describe movement of puff during the episode period. The results showed that the concentrations calculated by puff model (INPUFF) were better than plume model (ISCST). In the case of puff model (INPUFF), a model run using wind field data produced better results than that derived by single meteorological data.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.147-150
• /
• 2010

Ionopheric deley is the largest error sources in GNSS positining. The single frequency receiver user needs an ionospheric model like the Klobuchar model or NeQuick model to eliminate the ionospheric error. In this study we estimated VTEC(Vertical Total Electron Content) over DAEJ station using the two models in each season. We compared the results with Global Ionosphere Maps and International Reference Ionosphere model predictions. As a result, the NeQuick model was more accurate than Klobuchar model.

• 한국항해학회지
• /
• 제22권4호
• /
• pp.15-19
• /
• 1998

This paper concerns a bulk or semibulk cargo ship scheduling problem with a single loading port. This type of ship scheduling problem is frequently needed in real world for carrying minerals or agricultural produce from a major single production zone to many destinations scattered over a large area of the world. The first optimization model for this problem was introduced by Ronen (1986) as a nonlinear mixed integer program. The model developed in this paper is an improvement of his model in the sense that nonlinearities and numerous unnecessary integer variables have been eliminated. By this improvement we could expect real world instances of moderate sizes to be solved optimal solutions by commercial integer programming software. Similarity between the ship scheduling model and the capacitated facility location model is also discussed.

• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.449-458
• /
• 2001

단일절리에서 2상유체의 거동을 모의하기 위해 개발된 수치모형의 검증을 위해서 상대투과계수 특성식을 수치모형에 적용하여 가스와 물의 동시거동을 해석한 후, 수치모의 결과를 모형실험결과와 비교하였다. 절리면의 거칠기와 간극의 크기에 댸한 민감도 분석을 실시한 결과, 가스의 이동속도는 절리면의 거칠기와 반비례하였으며, 절리간극의 크기와는 상대투과계수 특성식의 영향으로 단상유체의 흐름에서와 같은 간극크기의 제곱에 비례하는 향상은 보이지 않았다. 수치모형의 현장적용성을 검토하기 위해서 지하 LPG 저장기지에 모형을 적용한 결과, 저장공동에 인접한 단일절리에서의 운영압의 동적변동에 따른 지하수와 프로판가스의 동시거동을 모사할 수 있었다. 절리면이 매끈하고 간극이 작아질수록 운영압과 지하수압의 조절로는 누출된 가스의 이동제어가 불가능해지는 것으로 나타났다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.370-381
• /
• 2016

As a single-channel pump is used for wastewater treatment, this particular pump type can prevent performance reduction or damage caused by foreign substances. However, the design methods for single-channel pumps are different and more difficult than those for general pumps. In this study, a design optimization method to improve the hydrodynamic performance of a single-channel pump impeller is implemented. Numerical analysis was carried out by solving three-dimensional steady-state incompressible Reynolds-averaged Navier-Stokes equations using the shear stress transport turbulence model. As a state-of-the-art impeller design method, two design variables related to controlling the internal cross-sectional flow area of a single-channel pump impeller were selected for optimization. Efficiency was used as the objective function and was numerically assessed at twelve design points selected by Latin hypercube sampling in the design space. An optimization process based on a radial basis neural network model was conducted systematically, and the performance of the optimum model was finally evaluated through an experimental test. Consequently, the optimum model showed improved performance compared with the base model, and the unstable flow components previously observed in the base model were suppressed remarkably well.

• Molecules and Cells
• /
• 제46권2호
• /
• pp.120-129
• /
• 2023

Recent technical advances have enabled unbiased transcriptomic and epigenetic analysis of each cell, known as "single-cell analysis". Single-cell analysis has a variety of technical approaches to investigate the state of each cell, including mRNA levels (transcriptome), the immune repertoire (immune repertoire analysis), cell surface proteins (surface proteome analysis), chromatin accessibility (epigenome), and accordance with genome variants (eQTLs; expression quantitative trait loci). As an effective tool for investigating robust immune responses in coronavirus disease 2019 (COVID-19), many researchers performed single-cell analysis to capture the diverse, unbiased immune cell activation and differentiation. Despite challenges elucidating the complicated immune microenvironments of chronic inflammatory diseases using existing experimental methods, it is now possible to capture the simultaneous immune features of different cell types across inflamed tissues using various single-cell tools. In this review, we introduce patient-based and experimental mouse model research utilizing single-cell analyses in the field of chronic inflammatory diseases, as well as multi-organ atlas targeting immune cells.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.40-48
• /
• 2012

This paper proposes the State-of-charge (SOC) estimator of a LiPB Battery using the Extended Kalman Filter (EKF). EKF can work properly only with an accurate model. Therefore, the high accuracy electrical battery model for EKF state is discussed in this paper, which is focused on high-capacity LiPB batteries. The battery model is extracted from a single cell of LiPB 40Ah, 3.7V. The dynamic behavior of single cell battery is modeled using a bulk capacitance, two series RC networks, and a series resistance. The bulk capacitance voltage represents the Open Circuit Voltage (OCV) of battery and other components represent the transient response of battery voltage. The experimental results show the strong relationship between OCV and SOC without any dependency on the current rates. Therefore, EKF is proposed to work by estimating OCV, and then is converted it to SOC. EKF is tested with the experimental data. To increase the estimation accuracy, EKF is improved with a single dominant varying parameter of bulk capacitance which follows the SOC value. Full region of SOC test is done to verify the effectiveness of EKF algorithm. The test results show the error of estimation can be reduced up to max 5%SOC.

• 대한수학회보
• /
• 제49권2호
• /
• pp.319-327
• /
• 2012

The equations of a multifluid interpenetration mix model are analyzed. The model is an intermediate mix model in the sense that it is defined by partial pressures but only a single global pressure and a single global temperature. It none-the-less avoids the stability difficulty. It is shown that the model is hyperbolic so that it is mathematically stable.