• The Korean Journal of Zoology
• /
• v.4 no.2
• /
• pp.20-24
• /
• 1961

The present experiment was conducted to investigate the rate of oxygen consumption in relation to the several amino acids in the Mang-Kong frog ,Gallula tornieri VOGT. 1. When the liver tissue was suspended in the Ringer's solution (0.85% NaCl), the amount of oxygen consumption per hour was 0.043$\mu$l/mg , whereas when it was suspended in M/15, pH 5.8 phosphate buffer the oxygen consumption reached 0.93$\mu$l/mg. 2. When 0.5ml of 1% alanine and 0.5ml of 0.5% arginine were used as respiratory material the amount of oxygen consumption increased remarkably, while on the other hand glycine showed little influence on the amount of oxygen consumption. 3. When 0.5ml of 0.1% , 0.5% alanine-arginine mixture, 0.5ml of 0.1% , 0.5% alanine-glycine mixture and 0.5ml of 1 % arginine-glycine were added the oxygen consumption in the liver tissue increased somewhat in comparison to the case in which single amino acid was used. 4. Glycine appeared to have influence on the respiration of the liver tissue but the amount of oxygen consumption increased as the concentration of arginine-glycine mixture increased, whereas the rate of oxygen consumption increased remarkably as alaninie-glycine mixture decreased. It was evidenced that in the combination of alanine-arginine the rate of oxygen consumption increased as the concentration of the mixture decreased and vice versa.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.129-132
• /
• 1999

A new single solution source MOCVD technique for the deposition of YBCO film has been developed, using a ultrasonic atomizer to feed the precursors into an evaporation zone. This method being investigated as a basis for future long wire fabrication, for example the electric power use, the magnatic applications, etc.. YBCO films were prepared on MgO(100) substrate, using mixture of Y, Ba, and Cu ${\beta}$ -diketonate chelate was dissolve in tetrahydrofuran as a solution sources. X-ray diffraction measurement indicated that the thin film grew epitaxially with the c-axis orientation perpandicular to the surface of the surface.

• Journal of the Korean Ceramic Society
• /
• v.26 no.1
• /
• pp.59-66
• /
• 1989

Single crystals of the superconducting Y-Ba-Cu oxide were grown by a flux technique. Stoichiometric mixture with excess BaO and CuOcontent was melted at 130$0^{\circ}C$, followed by fast cooling to 108$0^{\circ}C$ to prevent crystallizing of CuO. It was then reheated to 110$0^{\circ}C$ followed by being held at this temperature to control the number of nuclei, and cooled by 5$^{\circ}C$/hr to 80$0^{\circ}C$. This procedure was repeated with various compositions and crystals were obtained in cavity. Molten solution was seperated to two parts : the upper part of almost CuO and the rest of different composition. Appropriate composition of flux was 30mol% BaO and 70mol% CuO due to the seperation of molten solution. Single crystals have the habit of thin plate with good developed (001) crystal face, XRD, EDAX and single crystal X-ray investigations were carried out. The grown crystals have tetragonal structure with the lattice parameters a=b=3.84$\AA$, c=11.7$\AA$, and the space group P4/mmm. The crystal surface were observed by SEM.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.1
• /
• pp.61-68
• /
• 2019

Well aligned $SnO_2$-doped ZnO nanorods were prepared by single step or 2-step electrochemical depositions in a mixture solution of zinc nitrate hexahydrate, ammonium hydroxide solution and 0.1 M tin chloride pentahydrate. The morphologies of electrochemically deposited $SnO_2$-doped ZnO were transformed from plain (or network) structures at low reduction potential to needles on hills at high reduction potential. Well aligned ZnO was prepared at intermediate potential ranges. Reduction reagent and a high concentration of Zn precursor were required to fabricate $SnO_2$ doped ZnO nanorods. When compared to results obtained by single step electrochemical deposition, 2-step electrochemical deposition produced a much higher density of nanorods, which was ascribed to less potential being required for nucleation of nanorods by the second-step electrochemical deposition because the surface was activated in the first-step. Mechanisms of $SnO_2$ doped ZnO nanorods prepared at single step or 2-step was described in terms of applied potential ranges and mass-/charge- limited transfer.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.2
• /
• pp.289-298
• /
• 1998

We investigate the distribution of likelihood ratio test(LRT) of null hypothesis a sample is from single gamma with unknown shape and scale against the alternative hypothesis a sample is from a mixture of two gammas, each with unknown scale and unknown (but equal) scale. To obtain stable maximum likelihood estimates(MLE) of a mixture of two gamma distributions, the EM(Dempster, Laird, and Robin(1977))and Modified Newton(Jensen and Johansen(1991)) algorithms were implemented. Based on EM, we made a simple structure likelihood equation for each parameter and could obtain stable solution by Modified Newton Algorithms. Simulation study was conducted to investigate the distribution of LRT for sample size n = 25, 50, 75, 100, 50, 200, 300, 400, 500 with 2500 replications. To determine the small sample distribution of LRT, I considered the model of a gamma distribution with shape parameter equal to 1 + f(n) and scale parameter equal to 2. The simulation results indicate that the null distribution is essentially invariant to the value of the shape parameter. Modeling of the null distribution indicates that it is well approximated by a gamma distribution with shape parameter equal to the quantity $0.927+1.18/\sqrt{n}$ and scale parameter equal to 2.16.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.13-19
• /
• 2021

BACKGROUND: Chemicals such as antibiotics and surfactants can enter agricultural environment and they can be degraded by natural processes such as photolysis. These chemicals exist in mixtures in the environment, but studies on degradation of the mixtures are limited. This study compares the photodegradation of Triton X-100 (TX) and antibiotics [tetracycline (TC) and sulfathiazole (STH)] when they are in a single solution or in mixtures. METHODS AND RESULTS: TC, STH, and TX solutions were exposed to UV-A for the photodegradation tests for 14 days. The residual TC, STH, and TX concentrations were analyzed by using HPLC. The TC degradation was similar regardless of the presence of TX, while the TX degradation was lower in the presence of TC. The STH degradation was similar regardless of the presence of TX, while the TX degradation was greater in the presence of STH. However, the STH degradation was slower in the TC-STH-TX mixture than in the STH-TX mixture. Also, the TX degradation was negligible in the TC-STH-TX mixture. The results show that the photodegradation of TC, STH, and TX can be different in mixtures. This can be attributed to the different emission and absorption wavelengths of each compound and interaction between these compounds and photoproducts. CONCLUSION: Overall, this study emphasizes that photodegradation of single chemicals and chemical mixtures can be different, and more studies on single compounds as well as mixtures are required to understand the fate of chemicals in the environment in order to manage them properly.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.225-236
• /
• 2019

BACKGROUND: Hydroponics is one of the methods for evaluating plant production using the inorganic nutrient solutions, which is applied under the artificial light conditions of plant factory system. However, the application of the conventional inorganic nutrients for hydroponics caused several environmental problems: waste from culture mediums and high nitrate concentration in plants. Organic nutrients are generally irrigated as a supplementary fertilizer for plant growth promotion under field or greenhouse conditions. Hydroponic culture using organic nutrients derived from the agricultural by-products such as dumped stems, leaves or immature fruits is rarely considered in plant factory system. Effect of organic or conventional inorganic nutrient solutions on the growth and nutrient absorption pattern of green and red leaf lettuces was investigated in this experiment under fluorescent lamps (FL) and mixture Light-Emitting Diodes (LEDs). METHODS AND RESULTS: Single solution of tomatoes (TJ) and kales (K) deriving from agricultural by-products including leaves or stems and its mixed solution (mixture ration 1:1) with conventional inorganic Yamazaki (Y) were supplied for hydroponics under the plant factory system. The Yamazaki solution was considered as a control. 'Jeockchima' and 'Cheongchima' lettuce seedlings (Lactuca sativa L.) were used as plant materials. The seedlings which developed 2~3 true leaves were grown under the light qualities of FL and mixed LED lights of blue plus red plus white of 1:2:1 mixture in energy ratio for 35 days. Light intensity of the light sources was controlled at 180 μmol/㎡/s on the culture bed. The single and mixture nutrient solutions of organic and/or inorganic components which controlled at 1.5 dS/m EC and 5.8 pH were regularly irrigated by the deep flow technique (DFT) system on the culture gutters. Number of unfolded leaves of the seedlings grown under the single or mixed nutrient solutions were significantly increased compared to the conventional Y treatment. Leaf extension of 'Jeockchima' under the mixture LED radiation condition was not affected by Y and YK or YTJ mixture treatments. SPAD value in 'Jeockchima' leaves exposed by FL under the YK mixture medium was approximately 45 % higher than under conventional Y treatment. Otherwise, the maximum SPAD value in the leaves of 'Cheongchima' seedlings was shown in YK treatment under the mixture LED lights. NO₃-N contents in Y treatment treated with inorganic nutrient at the end of the experiment were up to 75% declined rather than increased over 60 % in the K and TJ organic treatment. CONCLUSION: Growth of the seedlings was affected by the mixture treatments of the organic and inorganic solutions, although similar or lower dry weight was recorded than in the inorganic treatment Y under the plant factory system. Treatment Y containing the highest NO₃-N content among the considered nutrients influenced growth increment of the seedlings comparing to the other nutrients. However effect of the higher NO₃-N content in the seedling growth was different according to the light qualities considered in the experiment as shown in leaf expansion, pigmentation or dry weight promotion under the single or mixed nutrients.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.2
• /
• pp.57-64
• /
• 2002

The 22%Cr-5%Ni-3%Mo duplex and 18%Cr-8%Ni austenitic stainless steels have been nitrogen permeated under the $1Kg/cm^2$ nitrogen gas atmosphere at the temperature range of $1050^{\circ}C{\sim}1150^{\circ}C$. The nitrogen-permeated duplex and austenitic stainless steels showed the gradual decrease in hardness with increasing depth below surface. The duplex stainless steel showed nitrogen pearlite at the outmost surface and austenite single phase in the center after nitrogen permeation treatment, while the obvious microstructural change was not observed for the nitrogen-permeated austenitic stainless steel. After solution annealing the nitrogen-permeated stainless steels(NPSA treatment) at $1200^{\circ}C$ for 10 hours, the hardness of the duplex and austenitic stainless steels was constant through the 2 mm thickness of the specimen, and the ${\alpha}+{\gamma}$ phase of duplex stainless steel changed to austenite single phase. Tensile strengths and elongations of the NPSA-treated duplex stainless steel remarkably increased compared to those of solution annealed (SA) duplex stainless steel due to the solution strengthening effect of nitrogen and the phase change from a mixture of ferrite and austenite to austenite single phase, while the NP-treated austenitic stainless steel displayed the lowest value in elongation due to inhomogeneous deformation by the hardness difference between surface and interior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.145-155
• /
• 2005

In this study, a finite element method program code which can be accomodate boundary conditions on the complex surfaces has been developed to simulate polymer extruder processes. The analysis method includes the fractional 4-step method for efficient computation time and compact usage of memory storage to solve the velocities and the pressure values from the Navier-Stokes equation. By using the developed program which was verified with simple Poiseuille flow mixture phenomena in single-and twin-screw extruder are analyzed. It is concluded that the proposed method resulte Poiseuille Poiseuille d in fair agreement with the exact solution of simple flow and the back flow near the entrance happens in single-screw model. It is identified that the location and values of maximum pressure in the twin screw extruder model. It is expected that the Velocity field found can be used to predict the degree of mixture in the extruder barrel.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.575-580
• /
• 2012

The purpose of this study is to investigate the crystalline structure and optical properties of (GaZn)(NO) powders prepared by solid-state reaction between GaOOH and ZnO mixture under $NH_3$ gas flow. While ammoniation of the GaOOH and ZnO mixture successfully produces the single phase of (GaZn)(NO) solid solution within a GaOOH rich composition of under 50 mol% of ZnO content, this process also produces a powder with coexisting (GaZn)(NO) and ZnO in a ZnO rich composition over 50 mol%. The GaOOH in the starting material was phase-transformed to ${\alpha}$-, ${\beta}-Ga_2O_3$ in the $NH_3$ environment; it was then reacted with ZnO to produce $ZnGa_2O_4$. Finally, the exchange reaction between nitrogen and oxygen atoms at the $ZnGa_2O_4$ powder surface forms a (GaZn)(NO) solid solution. Photoluminescence spectra from the (GaZn)(NO) solid solution consisted of oxygen-related red-emission bands and yellow-, green- and blue-emission bands from the Zn acceptor energy levels in the energy bandgap of the (GaZn)(NO) solid solutions.