• 한국멀티미디어학회논문지
• /
• 제7권6호
• /
• pp.781-790
• /
• 2004

This paper presents a fourth-order cumulants based iterative algorithm for blind channel equalization. It is robust with respect to the existence of heavy Gaussian noise in a channel and does not require the minimum phase characteristic of the channel. In this approach, the transmitted signals at the receiver are over-sampled to ensure the channel described by a full-column rank matrix. It changes a single-input/single-output (SISO) finite-impulse response (FIR) channel to a single-input/multi-output (SIMO) channel. Based on the properties of the fourth-order cumulants of the over-sampled channel outputs, the iterative algorithm is derived to estimate the deconvolution matrix which makes the overall transfer matrix transparent, i.e., it can be reduced to the identity matrix by simple reordering and scaling. Both a closed-form and a stochastic version of the proposed algorithm are tested with three-ray multi-path channels in simulation studies, and their performances are compared with a method based on conventional second-order cumulants. Relatively good results are achieved, even when the transmitted symbols are significantly corrupted with Gaussian noise.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권7호
• /
• pp.3433-3446
• /
• 2019

Aiming at the high complexity of traditional single-channel demodulation algorithm for PCMA signals, a new demodulation algorithm based on neural network is proposed to reduce the complexity of demodulation in the system of non-cooperative PCMA communication. The demodulation network is trained in this paper, which combines the preprocessing module and decision module. Firstly, the preprocessing module is used to estimate the initial parameters, and the auxiliary signals are obtained by using the information of frequency offset estimation. Then, the time-frequency characteristic data of auxiliary signals are obtained, which is taken as the input data of the neural network to be trained. Finally, the decision module is used to output the demodulated bit sequence. Compared with traditional single-channel demodulation algorithms, the proposed algorithm does not need to go through all the possible values of transmit symbol pairs, which greatly reduces the complexity of demodulation. The simulation results show that the trained neural network can greatly extract the time-frequency characteristics of PCMA signals. The performance of the proposed algorithm is similar to that of PSP algorithm, but the complexity of demodulation can be greatly reduced through the proposed algorithm.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.198-205
• /
• 2005

In this paper, we proposed a new algorithm for the separation of fetal ECG from single channel abdominal ECG. The algorithm consists of a stage of demixing vector calculation for initial signal and a stage of fetal beat detection for the rest of signal. The demixing vector was obtained by applying independent component analysis technique to projected signals into time-frequency domain. For the test of this algorithm, simulation signals, De Lathauwer's data and some measured data, which was acquired from 8 healthy volunteers whose pregnant periods ranged from 22 weeks to 35 weeks and whose ages from 27 to 37, were used. For each data, the accuracy of fetal beat detection was $100\%$ and with the location of fetal beats, fetal heart rate variability and morphology could be offered. In conclusion, this proposed algorithm showed the possibility of fetal beat separation with a single channel abdominal ECG and it might be adopted to a fetal health monitoring system, by which a single channel abdominal ECG is acquired.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권1호
• /
• pp.13-20
• /
• 2005

This paper addresses a new blind channel equalization method using fourth-order cumulants of channel inputs and a three-layer neural network equalizer. The proposed algorithm is robust with respect to the existence of heavy Gaussian noise in a channel and does not require the minimum-phase characteristic of the channel. The transmitted signals at the receiver are over-sampled to ensure the channel described by a full-column rank matrix. It changes a single-input/single-output (SISO) finite-impulse response (FIR) channel to a single-input/multi-output (SIMO) channel. Based on the properties of the fourth-order cumulants of the over-sampled channel inputs, the iterative algorithm is derived to estimate the deconvolution matrix which makes the overall transfer matrix transparent, i.e., it can be reduced to the identity matrix by simple recordering and scaling. By using this estimated deconvolution matrix, which is the inverse of the over-sampled unknown channel, a three-layer neural network equalizer is implemented at the receiver. In simulation studies, the stochastic version of the proposed algorithm is tested with three-ray multi-path channels for on-line operation, and its performance is compared with a method based on conventional second-order statistics. Relatively good results, withe fast convergence speed, are achieved, even when the transmitted symbols are significantly corrupted with Gaussian noise.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1390-1397
• /
• 2000

This paper presents the multi-channel active vibration control of a flexible plate of the acoustically loaded enclosure. The flexible plate was excited acoustically with sinusoidal and white noise input. The control was performed by two piezo ceramic actuators and two accelerometers. The experimental results were compared with the single channel control results. In the case of white noise input, 20 dB of vibration reduction was achieved below 300Hz frequency range. The experimental results demonstrate that multi-channel filtered-x LMS algorithm is effective than single-channel filtered-x LMS algorithm in active vibration control of plate.

• 한국음향학회지
• /
• 제35권4호
• /
• pp.280-287
• /
• 2016

본 논문에서는 다채널 능동 소음 제어를 위한 적응 필터에 적용할 수 있는 정규화된 FxLMS(Filtered-x Least Mean Square) 알고리즘을 제안하였다. 단일 채널 능동 소음 제어를 위한 FxLMS 알고리즘의 경우는 기존의 NLMS(Normalized Least Mean Square) 알고리즘과 같은 방식으로 정규화할 수 있는 반면, 다채널 능동 소음 제어의 경우에는 단일 채널 방식의 정규화 알고리즘을 그대로 적용할 수 없다. 먼저, 최소 교란 원리에 근거한 일반화된 정규화 알고리즘을 이용하여, 역행렬 연산을 피하기 위하여 대각 성분만을 고려한 정규화 알고리즘을 제안하였다. 컴퓨터 모의 실험을 통하여 제안된 알고리즘을 정규화되지 않은 기존의 알고리즘들과 비교하였다. 제안된 알고리즘이 정규화되지 않은 기존의 알고리즘에 비하여 비정상 환경에서 우수한 성능을 가진다는 것을 보였다.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.23-29
• /
• 1995

In this study, Active noise controlis implemented with single channel and multi-channel adaptive algorithm in 3 dimensional reverberant enclosure sound. field, which occurrs in complicated acoustic mode. First, for the one case excited with the resonant frequency of an enclosure, a target of control and the other cases excited with band-pass filtered random noise(100~400Hz), it is implemented to control reducing interior noise of enclosure with single channel and realtime multi-channel adaptive algorithm for global noise reduction in enclosure.

• 한국통신학회논문지
• /
• 제28권4C호
• /
• pp.384-391
• /
• 2003

Blind channel identification and equalization attempt to identify the communication channel and to remove the inter-symbol interference caused by a communication channel without using any known trainning sequences. In this paper, we propose a blind adaptive channel identification and equalization algorithm with phase offset compensation for single-input multiple-output (SIMO) channel. It is based on the one-step forward multichannel linear prediction error method and can be implemented by an RLS algorithm. Phase offset problem, we use a blind adaptive algorithm called the constant modulus derotator (CMD) algorithm based on condtant modulus algorithm (CMA). Moreover, unlike many known subspace (SS) methods or cross relation (CR) methods, our proposed algorithms do not require channel order estimation. Therefore, our algorithms are robust to channel order mismatch.

• 한국통신학회논문지
• /
• 제35권1C호
• /
• pp.45-54
• /
• 2010

이 논문에서는 다중사용자 (multi-user) 다중안테나 (multiple-in multiple-out : MIMO) 시스템을 위한 전송기법을 제안한다. Costa가 증명한 더티페이퍼코딩 (dirty-paper coding: DPC)이론에 따르면 송신기가 수신기의 가우시안 분포를 갖는 간섭 신호를 알고 있는 경우 간섭 신호에 상관 없이 채널 캐패시티를 얻을 수 있음이 알려져 있다. 단독사용자 채널의 경우 간단하며 효율적인 DPC기법들이 알려져 있으나 다중사용자 환경에는 실제 구현하는데 있어 복잡도와 관련해 많은 문제를 가지고 있다. 이 논문에서 우리는 다중사용자 환경에서 송신기에 알려진 갑선신호를 효율적으로 제어할 수 있는 네트워크 채널 행렬 삼각화 (network channel matrix triangulation: NMT)기법을 제안하고자 한다. 제안하는 NMT 알고리즘은 다중사용자 MIMO 채널을 서로 독립된 병렬의 Single-input Single-output (SISO) 채널들로 변환하여 단독사용자 환경을 위해 제안되어 있는 기존 DPC기법들을 다중사용자 환경에서도 사용 가능케 한다. 시뮬레이션 결과를 통해 제안된 알고리즘이 다중사용자 환경의 채널 캐패시티에 거의 접근함을 보일 것이다.

• 한국통신학회논문지
• /
• 제36권5A호
• /
• pp.536-542
• /
• 2011

FCC는 디지털 방송 전환 후 발생되는 TVWS에서의 효율적인 스펙트럼 활용을 위해 비면허 시스템의 주파수 사용을 허용하였다. 다양한 면허 사용자 및 비면허 CR 사용자가 공존하는 환경에서 최적 채널 선택을 위해서는 우선 채널 사용 현황 파악이 요구된다. 데이터베이스를 통해 제공되는 면허 사용자 채널 정보 외에는 센싱 알고리즘을 통한 검출이 필요한데 본 논문에서는 단일 채널 수신만으로 채널 본딩된 비면허 CR 신호까지 검출할 수 있는 알고리즘을 제안하였다. 전산 모의 실험 결과 IEEE 802.11af 신호는 단일 채널의 경우에는 SNR=-18dB, 8 채널 본딩 신호의 경우에는 SNR=-7dB에서 검출 확률이 90% 이상으로 나타났으며, 동일 조건에서 ECMA 392 신호는 단일 채널의 경우에는 SNR=-14dB, 8 채널 본딩 신호의 경우에는 SNR=-6dB로 나타났다. 결과적으로 제안 알고리즘을 통해 단일 채널 수신만으로 채널 본딩 신호의 검출이 가능해짐으로써 전채널 센싱 소요 시간의 감소 및 시스템 오버헤드를 줄일 수 있을 것으로 기대된다.