• 대한의용생체공학회:의공학회지
• /
• 제27권2호
• /
• pp.64-72
• /
• 2006

The present study introduces a new cortical patch-based source model for EEG/MEG cortical source imaging to consider anatomical constraints more precisely. Conventional source models for EEG/MEG cortical source imaging have used coarse cortical surface mesh or sampled small number of vertices from fine surface mesh, and thus they failed to utilize full anatomical information which nowadays we can get with sub-millimeter modeling accuracy. Conventional ones placed a single dipolar source on each cortical patch and estimated its intensity by means of various inverse algorithms; whereas the suggested cortical patch-based model integrates whole cortical area to construct lead field matrix and estimates current density that is assumed to be constant in each cortical patch. We applied the proposed and conventional models to realistic EEG data and compared the results quantitatively. The quantitative comparisons showed that the proposed model can provide more precise spatial descriptions of neuronal source distribution.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.520-529
• /
• 2015

The ambient $PM_{2.5}$ samples were collected by $PM_{2.5}$ sampler from September 2010 to December 2012 at Daegu University, Gyeongsan. A total of 260 samples were collected and 27 species were analyzed by inductively coupled plasma, ion chromatography, and thermal optical reflectance methods. Factor analysis identified four sources such as biomass burning source/secondary aerosol source, soil source, industry source, and incinerator source/mobile source. Also, backward trajectories were calculated using HYSPLIT 4 (Hybrid single-particle lagrangian integrated trajectory) model and PSCF (Potential source contribution function) model was applied to identify the possible source locations of carbonaceous species and water soluble ions species. PSCF results showed that the possible source locations of most chemical constituents measured in Gyeongsan were the industrial areas in the eastern coast of China, northeast regions of China, the Gobi Desert, and east sea of Korea.

• 한국콘텐츠학회논문지
• /
• 제10권9호
• /
• pp.107-116
• /
• 2010

시설물 입지 선정 문제(FLP)는 전통적인 최적화 문제중에 하나이다. FLP에 공급제약과 하나의 고객은 하나의 시설물에서만 제품을 공급받을 수 있다는 제약을 추가하면 단일 시설물 공급제약을 가지는 시설물 위치 설정 문제(SSFLP)가 된다. SSFLP는 NP-hard 문제로 알려져 있으며 진화 알고리즘과 같은 휴리스틱 알고리즘을 사용하여 해결하는 것이 일반적이다. 본 논문에서는 SSFLP를 위한 효율적인 진화 알고리즘을 제안한다. 제안하는 알고리즘은 적응형 링크 조절 진화 알고리즘과 3가지 휴리스틱 해 개선 방법을 조합하여 고안되었다. 제안하는 알고리즘을 벤치마크 문제에 적용하여 다른 알고리즘과 성능을 비교분석해 본 결과, 제안하는 알고리즘은 중간 크기의 문제에서 대부분 최적해를 찾았으며 큰 문제에서도 안정된 결과를 보여주었다.

• Journal of Korean Vacuum Science & Technology
• /
• 제1권1호
• /
• pp.38-44
• /
• 1997

Epitaxial growth of SiC films on Si(111) substrates without carbonization was carried out n the temperature range of 900-100$0^{\circ}C$ under high vacuum conditions by single source chemical vapor deposition (CVD) of 1,3-disilabutane (H$_3$SiCH$_2$SiH$_2$$CH_3$). The monocrystalline nature of the films was confirmed by XRD, RHEED and cross-sectional TED. Cross-sectional TEM image indicated that no void exists and the boundary is clear and smooth at the SiC-Si(111) interface. RBS and AES analyses also showed that the films are stoichiometric and homogeneous in depth, From the results, this single source growth techniqe of using 1,3-disilabutane has been found suitable and effective for epitaxial growth of stoichiometric SiC on Si(111) without carbonization at temperatures below 100$0^{\circ}C$.

• 대한화학회지
• /
• 제68권3호
• /
• pp.139-145
• /
• 2024

This study aims to elucidate the mechanism involved in the hydrolysis of the hexacyanoferrate(III) complex ion (Fe(CN)₆^3-) and the mechanism leading to the formation of Prussian blue (Fe^III₄[Fe_II(CN)₆]₃·xH₂O, PB) in acidic aqueous solutions at moderately elevated temperatures. Hydrolysis constitutes a crucial step in generating PB through the widely used single-source or precursor method. Recent PB syntheses predominantly rely on the single-source method, where hexacyanoferrate(II/III) is the exclusive reactant, as opposed to the co-precipitation method employing bare metal ions and hexacyanometalate ions. Despite the widespread adoption of the single-source method, mechanistic exploration remains largely unexplored and speculative. Utilizing UV-vis spectrophotometry, negative-ion mode liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS), and a devised reaction, this study identifies crucial intermediates, including aqueous Fe^2+/3+ ions and hydrocyanic acid (HCN) in the solution. These two intermediates eventually combine to form thermodynamically stable PB. The findings presented in this research significantly contribute to understanding the fundamental mechanism underlying the acid-catalyzed hydrolysis of the hexacyanoferrate(III) complex ion and the subsequent formation of PB, as proposed in the sequential mechanism introduced herein. This finding might contribute to the cost-effective synthesis of PB by incorporating diverse metal ions and potassium cyanide.

• 전력전자학회논문지
• /
• 제13권5호
• /
• pp.369-375
• /
• 2008

본 논문에서는 Z-소스 인버터를 사용하여 단상 계통 연계형 태양광 시스템을 제어하는 기법을 제시하였다. 인버터 스위칭소자의 전압 스트레스를 고려하여 광전지 출력전압에 대한 계통 연계형 Z-소스 인버터의 동작영역을 분석하였다. 스위칭 손실을 감소시키면서 shoot-through 시간을 효율적으로 제어하는 스위칭 패턴을 사용하였다. 시뮬레이션 및 32-비트 DSP를 사용한 실험을 통하여 계통연계형 Z-소스 인버터의 제어 시스템의 성능을 평가하였다.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.664-671
• /
• 2006

We propose the correlation to predict the spreading thermal resistance on a plate with symmetrical four heat sources. The correlation transforms four heat sources to a single equivalent heat source and then the spreading thermal resistance can be obtained with the existing equation for a single heat source. When the four heat sources are mounted on a square base plate, the correlation is expressed as a function of the heat source size, the length of base plate, the plate thermal conductivity and the distance between heat sources. Compared to the results of three-dimensional numerical analysis, the spreading thermal resistance by the proposed correlation is in good agreement within 10 percent accuracy.

• 한국경영과학회지
• /
• 제24권2호
• /
• pp.41-51
• /
• 1999

In sole-source procurement contraction for government goods and services, the buyer (government) needs to derive the optimal actions from the contractor so the buyer can obtain the maximum utility and the contractor, or single-source supplier, is guaranteed the equivalent of a minimum level of profit. Under the assumption of risk-neutrality for both the buyer and the contractor and the buyer's unobservability of the contractor's action, it is necessary for the buyer to design a (mathematical) model to achieve the above objective. This paper considers the mathematical formulation in which two problems - moral hazard and adverse selection - are present simultaneously; furthermore, from the formulation, a GAMS (General Algebraic Modeling System) program is used for a possible buyer to obtain the optimal actions.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.576-579
• /
• 2009

This paper suggests a autonomous linear Li-ion battery charger which can safely distribute power between an external power source(AC adapter, auto adapter, or USB source), battery, and the system load. Depending on an external power source's capability, the charger selects proper charging-mode automatically. The charger IC designed and fabricated on Dongbu HITEC's $0.35{\mu}m$ BCD process with layers of one poly and three metals.

• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.983-990
• /
• 2011

This paper investigates active noise control(ANC) of a rectangular cavity using single channel filtered-x least mean square(FXLMS) algorithms to globally reduce the interior noise. To obtain the global reduction of the interior noise, multichannel active control should be incorporated in general. We, however, examined firstly the optimal location of the secondary source that produces a global reduction of the interior noise field using single channel control. We then investigated the frequency characteristics of the reduction to yield the effective frequency band of the active control system. It follows that the secondary source should be located as close to the primary source as possible in order to obtain the global reduction.