• 설비공학논문집
• /
• 제12권4호
• /
• pp.422-429
• /
• 2000

Plate and shell heat exchanger(P&SHE) is widely applied as evaporators or condensers in the refrigeration and air conditioning systems for their high efficiency and compactness. In order to set up the database for the design of the P&SHE, heat transfer and pressure drop characteristics for single phase flow of water in a plate & shell heat exchanger are experimentally investigated in this study. Single phase heat transfer coefficients were measured for turbulent water flow in a plate and shell heat exchangers by Wilson plot method. The shell side heat transfer resistance was varied and the overall heat transfer coefficients were measured. The single-phase heat transfer coefficients in a plate side were obtained by Wilson plot method. Single-phase heat transfer correlations based on projected heat transfer area and friction factor correlations have been proposed for single phase flow in a plate and shell heat exchanger.

• 한국터널지하공간학회 논문집
• /
• 제10권2호
• /
• pp.167-175
• /
• 2008

터널공사비에 대한 국내외의 사례 조사 결과 싱글쉘 터널은 기존의 콘크리트 라이닝을 설치하는 이중쉘 터널에 비하여 공사비가 저렴하였다. 그러나 암반 상태가 불량해 질수록 싱글쉘 터널의 경제성은 급격히 저하되었다. 따라서 싱글쉘 공법은 암반상태가 양호한 지반에 적용해야 한다. 국내의 경우 일반적으로 여러 암반 등급이 다양하게 나타나므로 양호한 암반과 불량한 암반의 비율을 고려하여 싱글쉘 공법의 적용 여부를 판단해야 한다. 싱글쉘에 이용되는 숏크리트 및 록볼트는 영구지보재로서 고품질이어야 하므로 지보재료의 저렴한 공급여부에 따라서 싱글쉘 공법의 적용 대상 암반이 확대될 수 있을 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.138-143
• /
• 2002

These days, domestic tunnel demand has outstandingly been increased. Therefore, tunneling methods have been developed to excavate underground more economically and endurably from wood support methods, ASSM, to NATM and also more efficient methods has strongly been asked in recent years, such as single shell NATM. In this study, we will discuss on the disadvantages of this single shell NATM, one of tunneling methods with no lining.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.255-263
• /
• 2023

The shell and tube-type heat exchangers have been frequently used in many industrial field because of its simple structure and wide operation conditions and so on. The purpose of this study is to investigate the flow characteristics in single shell of shell and tube-type heat exchanger according to velocity and temperature of hot air released from heat exchanger simulator through numerical analysis. As the results, the temperature was decreased in almost quadratic curve from top to bottom in single shell of the shell and tube-type heat exchanger. Further the changes of pressure and velocity in outlet according to change of inlet temperature were not observed. The cost for operating the shell and tube-type heat exchanger should be compared the supply cost of hot air with that of velocity in order to make a economic decision.

• 동력기계공학회지
• /
• 제3권4호
• /
• pp.22-27
• /
• 1999

Single phase heat transfer coefficients were measured for turbulent water flow in a plate & shell heat exchangers by using Wilson plot method. An experiment for counterflow heat exchange between the plate and shell was performed. The shell side heat transfer resistance was varied and the overall heat transfer coefficients were measured. The single-phase heat transfer coefficients in a plate side were obtained by Wilson plot method. Single-phase heat transfer correlations based on projected heat transfer area have been proposed for a plate & shell heat exchanger.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.376-381
• /
• 2019

In this study, a poly(vinyl) alcohol/sodium alginate (PVA/SA) mixture was used to fabricate core-shell structured gel beads for autotrophic single-stage nitrogen removal (ASNR) using aerobic and anaerobic ammonia-oxidizing bacteria (AAOB and AnAOB, respectively). For stable ASNR process, the mechanical strength and oxygen penetration depth of the shell layer entrapping the AAOB are critical properties. The shell layer was constructed by an interfacial gelling reaction yielding thickness in the range of 2.01-3.63 mm, and a high PVA concentration of 12.5% resulted in the best mechanical strength of the shell layer. It was found that oxygen penetrated the shell layer at different depths depending on the PVA concentration, oxygen concentration in the bulk phase, and free ammonia concentration. The oxygen penetration depth was around $1,000{\mu}m$ when 8.0 mg/L dissolved oxygen was supplied from the bulk phase. This study reveals that the shell layer effectively protects the AnAOB from oxygen inhibition under the aerobic conditions because of the respiratory activity of the AAOB.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2316-2321
• /
• 2008

This paper presents an improved performance of heat transfer for shell-and-tube and thermal analysis based on the Bell-Delaware method for single tube. Heat transfer has been compared for a smooth tube, helical tube and surface-coated tube. In general, the results showed that properly designed helical tube and surface-coated tube offer a significant improvement in heat transfer. The numerical results derived from the Bell-Delaware method for the shell-side heat transfer coefficient were verified with experimental results. The thermal analysis aids significantly in the solution of the design problem.

• 한국터널지하공간학회 논문집
• /
• 제8권3호
• /
• pp.273-287
• /
• 2006

본 연구에서는 숏크리트 라이닝과 2차 콘크리트 라이닝 사이에 방수막으로 분리된 기존 이중구조의 터널 라이닝과 터널 라이닝 단면상에 전단력 전달을 저해하는 장치를 포함하지 않은 일체화 싱글쉘 구조의 터널 라이닝의 파괴양상 및 하중 지지성능에 관해 고찰한다. 하중지지력 평가를 위하여 우선적으로 수치해석적인 사전 평가가 실시되었으며, 새롭게 고안된 실대형 터널 라이닝 하중재하 실험이 실시되었다. 이때, 이완하중이나 암괴하중을 모사하기 위해 터널 천단부 집중하중이 고려되었다. 본 연구를 통하여, 동일한 터널라이닝 강도 관리기준에서 이중구조 라이닝보다 싱글쉘 라이닝 구조가 약 20%정도 높은 지지력을 보였으며, 다중 숏크리트 타설 단계마다 고성능 첨가재료 투입량의 조절로 복합재료 싱글쉘 라이닝 구조를 형성함으로써 보다 적은 고성능화 첨가재료 투입량으로 유사한 지지성능을 확보할 수 있는 가능성을 보였다.

• Wind and Structures
• /
• 제8권1호
• /
• pp.35-48
• /
• 2005

Wind loading is very important in structural design of large-span single-layer reticulated shell structures. In this paper, a geometrically nonlinear wind-induced vibration analysis strategy for large-span single-layer reticulated shell structures based on the nonlinear finite element method is introduced. According to this strategy, a computation program has been developed. With the information of the wind pressure distribution measured simultaneously in the wind tunnel, nonlinear dynamic analysis, including dynamic instability analysis, for the wind-induced vibration of a single-layer reticulated shell is conducted as an example to investigate the efficiency of the strategy. Finally, suggestions are given for dynamic wind-resistant analysis of single-layer reticulated shells.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.1026-1036
• /
• 2004

In this study, single-phase heat transfer experiments were conducted with Oblong Shell and Plate heat exchanger using water. An experimental water loop has been developed to measure the single-phase heat transfer coefficient and pressure drop in a vertical Oblong Shell and Plate heat exchanger. Downflow of hot water in one channel receives heat from the cold water upflow of water in the other channel. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the Oblong Shell and Plate heat exchanger remains turbulent. The present data show that the heat transfer coefficient and pressure drop increase with the Reynolds number. Based on the present data, empirical correlations of the heat transfer coefficient and pressure drop in terms of Nusselt number and friction factor were proposed. Also, performance prediction analyses for Oblong Shell and Plate heat exchanger were executed and compared with experiments. $\varepsilon$-NTU method was used in this prediction program. Independent variables are flow rates and inlet temperatures. Compared with experimental data, the accuracy of the program is within the error bounds of $\pm$5% in the heat transfer rate.