• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.6
• /
• pp.255-261
• /
• 2002

Recently, traction motors in trains are supplied with single phase a.c. power. After this power is converted to d.c. power, it is inverted to three phase power to operate traction motors. As going through the process of the conversion, harmonic current is generated in train. The method of conventional analysis on harmonics, studied by RTRI, is modeled with equivalent circuit of ac AT-fed electric railroad system using by the distributed constant circuit. However, this circuit as two-port network model has some difference in comparison with real system. The reason why the conventional method is different from the real system is that the conventional method dose not include three conductor groups, that is catenary, rail, and feeder, and admittance between the conductors for line capacitance. Therefore, this method has a little error. This paper proposes new method to more effectively estimate Harmonic current. In this method, numerous components in electric railway are categorized and each component is defined as a four- port network model. The equivalent circuit for the entire power supply system is also described into a four-port network model with connections of these components. In order to evaluate the efficiency and the accuracy of a proposed method, it is compared with values measured in Kyung-Bu high speed line and ones calculated by the conventional method.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.25-28
• /
• 2010

The need for multiband RF front-end in modern communication system is growing rapidly. For example, satellite system always uses a complex arrangement of frequency plans and consequently needs filters for each communication channel and it will be ideal to have a single filter module that does jobs of all those channel filters to reduce the size and payload of the system. In this paper, a new method to transform four-port self-feedback balanced dual-band bandpass filter into two-port is proposed. The two-port balanced dual-band bandpass filter which has baluns at the input and output ports and the fundamental frequency at 2.5 GHz and the first harmonic frequency at 5.7 GHz is fabricated and measured. Good agreement between measured and simulated results was achieved.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.5
• /
• pp.248-254
• /
• 2001

The traction power demand highly varies with time and train positions and the traction load is a large-capacity current at single phase converted from 3-phase power system. Subsequently, each phase current converted from 3-phase power system cannot be maintained in balance any longer and thus the traction load can bring about imbalance in three-phase voltage. Therefore, the exact assessment of voltage unbalance must be carried out preferentially as well as load forecast at stages of designing and planning for electric railway system. The evaluation of unbalance voltage in areas, such as electric railway depots should be a prerequisite with more accuracy. The conventional researches on voltage unbalance have dealt with connection schemes of the transformers used in ac AT-fed electric railroads system and induced formulas to briefly evaluate voltage unbalance in the system(3). These formulas are still being used widely due to their easy applicabilities on voltage unbalance evaluation. Meanwhile, they don't take into account detailed characteristics of ac AT-fed electric railroads system, being founded on some assumptions. Accordingly. accuracy still remains in question. This paper proposes a new method to more effectively estimate voltage unbalance index. In this method, numerous diverted circuits in electric railway depots are categorized in three components and each component is defined as a two-port network model. The equivalent circuit for the entire power supply system is also described into a two-port network model by making parallel and/or series connections of these components. Efficiency and accuracy in voltage unbalance calculation as well can be promoted by simplifying the circuits into two-port network models.

• Korea Trade Review
• /
• v.45 no.5
• /
• pp.141-159
• /
• 2020

Container terminals at Gwangyang Port are operated by three container operators: A, B and C. Ultimately, there is consensus that a single operator should operate all terminals so that economies of scale can be achieved even in the operation of the container terminal. Integration between operators has a positive effect on both operators and shipping companies. From the operator's point of view, overlapping fixed costs between operators can be unified, reducing overall costs and utilizing spare facilities. On the other hand, from the viewpoint of the shipping company, it is possible to ensure stable use of the port facilities and always allow berthing, reduce days on demurrage and ship waiting, and provide one-stop service for work. However, existing cases of operators' integration or relocation of terminals remained to estimate the expected effects of alternatives, emphasizing only the financial point of view. The port terminal is a large system, and it is important to consider that it is an aggregate of major logistics facilities and equipment. Moreover, if the estimation can be made by quantifying the expected effect, the justification of the terminals' relocation can be further emphasized. Therefore, it is very important to estimate the expected effect from the viewpoint of systemic operation. Moreover, the need for operators' integration can be further emphasized if it can be estimated through quantification of expected effects. Currently, three alternatives are considered as alternatives to the terminals' relocation, and in this study, the optimal plan was derived for the 3 alternatives by the linear planning model of the minimum shuttle transportation cost in the terminal. The optimal plan is alternative 2, which shows the most advantageous integration effect in terms of expected effects. Alternative 2 integrates the B terminal into the C terminal, and the A terminal operates independently as it is.

• Journal of Mechanical Science and Technology
• /
• v.15 no.1
• /
• pp.108-116
• /
• 2001

The in-cylinder flow field of gasoline engine comprises unsteady compressible turbulent flows caused by the intake port, combustion chamber geometry. Thus, the quantitative analysis of the in-cylinder flow characteristics plays an important role in the improvement of engine performances and the reduction of exhaust emission. In order to obtain the quantitative analysis of the in-cylinder gas flows for a gasoline engine, the single-frame particle tracking velocimetry was developed, which is designed to measure 2-dimensional gas flow field. In this paper, influences of the swirl and tumble intensifying valves on the in-cylinder flow characteristics under the various intake flow conditions were investigated by using this PTV method. Based on the results of experiment, the generation process of swirl and tumble flow in a cylinder during intake stroke was clarified. Its effect on the tumble ratio at the end of compression stroke was also investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.5
• /
• pp.550-556
• /
• 2014

In this study, for the control of a single water tank system, a fuzzy-PID controller design technique based on a fuzzy model is investigated. For this purpose, a water tank system is linearized as a number of submodels depending on the operating point, and a fuzzy model is obtained by fuzzy combining. Each submodel is approximated as a first order time delay model, and a PID controller is designed using several existing tuning techniques. Then, through the fuzzy combination of this controller using the same method as that of the fuzzy model, a fuzzy-PID controller is designed. For the proposed technique, a simulation is performed using the fuzzy model of a water tank system, and the validity is examined by comparing its performance with that of a PID controller.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.233-236
• /
• 1999

We have constructed a narrow-linewidth single-longitudinal-mode unidirectional $Er^{3+}$ -doped fiber laser using a fiber Bragg grating incorporated by a three port optical circulator with a compact configuration. Using a conventional delayed self-heterodyne detection technique with Mach-Zehnder interferometer a linewidth of 5 kHz was measured. In a single-longitudinal-mode operation, output power of up to 2.7 mW at 1548 nm were obtained for a launched pump power of 43 mW at 980 nm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.131-143
• /
• 1996

In this paper, we propose the improved structure of fully interconnected ATM Switch to develop the small sized switch element and represent practical implementation of switch network. As the part II of the full study about structure and implementation of fully interconnected ATM Switch, this paper especially describes the implementation of an ATM switching element with 8 input port and 8 output port at 155 Mbits/sec each. The single board switching element is used as a basic switching block in a small sized ATm switch for ATM LAN Hub and customer access node. This switch has dedicated bus in 12 bit width(8 bit data + 4 bit control signal) at each input and output port, bit addressing and cell filtering scheme. In this paper, we propose a practical switch architecture with fully interconnected buses to implement a small-sized switch and to provide multicast function withoutany difficulty. The design of switching element has become feasible using advanced CMOS technology and Embedded Gate Array technology. And, we also represent Application Specific Integrated Circuit(ASIC) of Switch Output Multiplexing Unit(SOMU) and 12 layered Printed Circuit Board for interconnection network of switch.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.43-48
• /
• 2012

This paper presents an iterative single-frequency continuous-wave signal-based I/Q regeneration method for improving image-rejection performance of multi-port junction-based direct receivers (MPDRs). This paper analyzes I/Q regeneration in MPDRs as I/Q mismatch compensation for direct conversion receivers. Based on the analysis, this paper evaluates the accuracy of I/Q regeneration in terms of the image-rejection ratio (IRR). The proposed method improves the IRR performance more than 20 dB compared to existing I/Q regeneration methods. Simulation results show that MPDRs using the proposed method can achieve an IRR of more than 70 dB, and that the bit error rate performances are almost the same as those of conventional coherent demodulators, even in fading channels.

• Journal of architectural history
• /
• v.15 no.3
• /
• pp.81-98
• /
• 2006

Choryang Waekwan was the biggest Japanese settlment to house the Japanese diplomatic mission and traders in Korea. Waekwan means Japanese Pavilion literally, but the reality of this Waekwan exceeded much the scale of single architecture. Since Choryang Waekwan was closed in the second half of the nineteenth century, the site of this settlement grew rapidly as the downtown of Busan, which was the first port open to foreign countries in modern Korea. The formation of modern port owes much to the presence of Japanese settlment in Lee Dynasty as long as Choryang was officially designated as the trading port toward Japan and vice versa. Busan is the nearest city to Japan, in fact. Within a day ships could reach Tsushima Island, the island region north of Fukuoka, which played an intermediary role between Seoul and Edo. No architectural remain could be seen on the actual site of Choryang Waekwan. The site has become one of the busiest centers in Busan with quantify of office buildings and shops. The former Busan City Hall was located in this area. The field survey of the site as well as the analysis of historical documents, which were newly found both in Korea and in Japan, enabled to reconstruct the architecture and cityscape of Waekwan by way of computer graphics.