• 한국결정성장학회지
• /
• 제12권6호
• /
• pp.267-271
• /
• 2002

희박 자성 반도체 ZnMnTe를 장벽층으로 사용한 양질의 ZnTe/ZnMnTe 단일 양자우물 구조를 열벽적층 성장법으로 성장하였다. 고분해능 X-선 회절측정 결과 ZnTe 우물층이 강하게 스트레인을 받고 있음을 알 수 있었다. 광발광 측정으로부터 무거운 양공 엑시톤 (el-hhl)과 가벼운 양공 엑시톤 (el-lhl)의 매우 뾰족한 발광 크들이 나타남을 관측하였다. 또한 우물층의 두께가 증가함에 따라 (el-hhl)과 (el-lhl)의 엑시톤 관련 피크들은 낮은 에너지 쪽으로 이동하였다. 광발광 피크 세기의 온도에 따른 변화는 운반자들의 열적 활성화로 설명할 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권3호
• /
• pp.20-22
• /
• 2003

Y$_2$O$_3$ films were pulsed laser deposited on cube textured Ni and Ni-W substrates to be used as a single buffer layer of YBCO coated conductor. Initial deposition of $Y_2$O$_3$ films was performed in a reducing atmosphere, and subsequent deposition was done in the base pressure of the chamber and oxygen atmosphere. The $Y_2$O$_3$ films have a strong cube texture (The full width at half maximum of the ø-scan of $Y_2$O$_3$ was 8.4 which was the same as that of metal substrate) and smooth crack-free microstructure. The biaxially textured YBCO films (The full width at half maximum of the ø-scan was 10.2) pulsed laser deposited on the $Y_2$O$_3$/metal exhibited Tc(R=0) of 86.5K and Jc of 0.7 MA/cm2 at 77K in self field, representing that the $Y_2$O$_3$ single buffer layer is an efficient diffusion barrier of Ni and thus very promising for the achievement of high-Jc YBCO coated conductor.

• 한국작물학회지
• /
• 제43권4호
• /
• pp.223-227
• /
• 1998

The objectives of this study were to find the sprouting condition and to establish the optimum production methods of plug seedlings in yacon (Polymnia sonchifolia Poepp. & Endl.). The sprouting ratio was greatest at $30\pm 1^{\circ}C$ at 20 days after planting. Crowns with single buds were more effective than those with two or more buds for sprouting, which might be due to the apical dominance. Planting the shoots separated from crown after sprouting in the single- and double-layer polyethylene-covered greenhouses reduced seedling period with 25% and 50%, respectively. Planting the shoots after sprouting was more effective than planting the crown buds. Double-layer polyethylene-covered green-house was good for plug seedling production than open field or single-layer polyethylene-covered greenhouse. The bed soils composed of clay loam : compost or sand : compost (1:l=v:v) were more effective to produce plug seedlings than only clay loam, sand or compost. Seedlings could be produced at 30 days after planting in our studies.

• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.232-237
• /
• 2014

We have fabricated white organic light-emitting diodes (OLEDs) by co-doping of red and blue phosphorescent guest emitters into the single host layer. Tris(2-phenyl-1-quinoline) iridium(III) [$Ir(phq)_3$] and iridium(III)bis[(4,6-di-fluorophenyl)-pyridinato-$N,C^{2^{\prime}}$]picolinate (FIrpic) were used as red and blue dopants, respectively. The effects of dopant concentration on the emission, carrier conduction and external quantum efficiency characteristics of the devices were investigated. The emissions on the guest emitters were attributed to the energy transfer to the guest emitters and direct excitation by trapping of the carriers on the guest molecules. The white OLED with 5% FIrpic and 2% $Ir(phq)_3$ exhibited a maximum external quantum efficiency of 19.9% and a maximum current efficiency of 45.2 cd/A.

• International Journal of Contents
• /
• 제7권1호
• /
• pp.14-22
• /
• 2011

Temporal Sign Language Recognition (TSLR) from hand motion is an active area of gesture recognition research in facilitating efficient communication with deaf people. TSLR systems consist of two stages: a motion sensing step which extracts useful features from signers' motion and a classification process which classifies these features as a performed sign. This work focuses on two of the research problems, namely unknown time varying signal of sign languages in feature extraction stage and computing complexity and time consumption in classification stage due to a very large sign sequences database. In this paper, we propose a combination of Dynamic Time Warping (DTW) and application of the Single hidden Layer Feedforward Neural networks (SLFNs) trained by Extreme Learning Machine (ELM) to cope the limitations. DTW has several advantages over other approaches in that it can align the length of the time series data to a same prior size, while ELM is a useful technique for classifying these warped features. Our experiment demonstrates the efficiency of the proposed method with the recognition accuracy up to 98.67%. The proposed approach can be generalized to more detailed measurements so as to recognize hand gestures, body motion and facial expression.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.109.2-109.2
• /
• 2011

A photovoltaic system is getting the spotlight for a environment-friendly energy source. But its location is limited because a lot of land is necessary for photovoltaic arrays. Nevertheless, its dissemination is rapidly increasing more than 40 % every year and exceeded about 400 MW in 2009. The radical growth of a photovoltaic system aggravated a lack of sites, so that forests and farmland were destroyed. It is demanded to make use of a vacant lot or little piece of land for the way to solve the lack of sites and improve the location requirements for a photovoltaic system. General photovoltaic arrays are consist of a single layer structure and needs enough separation distances to maximize the amount of solar radiation and to eliminate influences by the shadow of other arrays. So that a large amount of land is required for the site. The solar cell arrays with long separation distances can not be placed in a small vacant lot and its site application efficiency is low. This study optimized photovoltaic arrays as multilayered structure with movable sleeves for the efficient photovoltaic in a small site. The existing photovoltaic arrays with a single layer structure were fixed or tracking systems. In this experimental equipment, photovoltaic arrays attached to the multilayers have rectilinear movement and rotary motion using sleeves. Therefore, shadow influences were removed and the generation capacity was improved. On the simulation result, generation increased by about 30% in the same site considering shadow influences and so on.

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.333-339
• /
• 2014

Single crystal growth of $BaFe_{12}O_{19}$ by the solid state crystal growth method was attempted. Seed crystals of ${\alpha}-Fe_2O_3$ were pressed into pellets of $BaFe_{12}O_{19}$ + 2 wt% $BaCO_3$ and heat-treated at temperatures between $1150^{\circ}C$ and $1250^{\circ}C$ for up to 100 hours. Instead of single crystal growth taking place on the seed crystal, BaO diffused into the seed crystal and reacted with it to form a polycrystalline reaction layer of $BaFe_{12}O_{19}$. The microstructure, chemical composition and structure of the reaction layer were studied using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), x-ray Diffraction (XRD) and micro-Raman scattering and confirmed to be that of $BaFe_{12}O_{19}$. XRD showed that the reaction layer shows a strong degree of orientation in the (h00)/(hk0) planes in the sample sintered at $1200^{\circ}C$. $BaFe_{12}O_{19}$ layers with a degree of orientation in the (hk0) planes could also be grown by heat-treating an ${\alpha}-Fe_2O_3$ seed crystal buried in $BaCO_3$ powder.

• Wind and Structures
• /
• 제5권6호
• /
• pp.543-562
• /
• 2002

The main purpose of this study is to discuss the design wind loads for the structural frames of single-layer latticed domes with long spans. First, wind pressures are measured simultaneously at many points on dome models in a wind tunnel. Then, the dynamic response of several models is analyzed in the time domain, using the pressure data obtained from the wind tunnel experiment. The nodal displacements and the resultant member stresses are computed at each time step. The results indicate that the dome's dynamic response is generally dominated by such vibration modes that contribute to the static response significantly. Furthermore, the dynamic response is found to be almost quasi-static. Then, a series of quasi-static analyses, in which the inertia and damping terms are neglected, is made for a wide range of the dome's geometry. Based on the results, a discussion is made of the design wind load. It is found that a gust effect factor approach can be used for the load estimation. Finally, an empirical formula for the gust effect factor and a simple model of the pressure coefficient distribution are provided.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.165-170
• /
• 2008

본 논문에서는 새로이 제안된 접합부를 가진 단층 래티스 돔의 비탄성 거동을 실험적으로 분석하였다. 구조적인 성능과 시공성을 모두 만족시키기 위해서 제안된 새로운 접합부를 적용하여 강관으로 구성된 스팬 7m의 축소 실험모델을 제작하였으며, 하중 전이장치를 이용하여 각 절점에 균일한 하중이 가력되는 정적 재하실험을 수행하였다. 최대 가력하중은 설계하중의 약 1.6배였으며, 일부 부재에서 압축 항복점을 넘어 비탄성 좌굴이 발생하였다. 좌굴 발생 이후에는 가력장치가 허용할 수 있는 변위까지 실험을 수행하였으며, 실험을 통해서 구해진 래티스 돔의 거동을 구조설계의 관점에서 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.43-46
• /
• 2004

We demonstrated efficient white light emitting OLEDs with a single emissive layer structure, which was blue-emitting 1,4-bis[2,2-diphenylvinyl]biphenyl (DPVBi) doped with blue luminescent amino-substituted distyrylarylene amine (DSA-amine) and red luminescent [2,6-bis[2-[5-(dibutylamino) phenyl]vinyl]-4H -pyran-4-ylidene]propanedinitrile (DADB). Through the optimization of the device structure, the white light emission with full visible spectral range was obtained. Its CIE color coordinates was (0.32,0.42) at 10 $mA/cm^2$ and the external quantum efficiency, the luminance efficiency and the luminance yield were 3.7 %, 3.3 lm/W and 9.0 cd/A, respectively.