• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.461-462
• /
• 2006

A single-gap and single-gamma transflective liquid-crystal (LC) display using patterned vertical alignment (PVA) mode was designed. In the device, a vertical electric field drives a vertically aligned LC to tilt down to optimize polarization efficiency. Electrodes of transmissive and reflective area were patterned $22.5^{\circ}$ and $45^{\circ}$ with respect to the polarizer so that a tilt-down direction of the LC director was $22.5^{\circ}$ and $45^{\circ}$ in the reflective and transmissive regions, respectively. In the device, the cell gap was the same for both regions, and the gamma curve matched each other in both regions because tilt angle of LC director was the same according to the applied voltage. Moreover, the dark state was irrespective of the cell retardation value at normal direction, which was highly important in massive fabrications. The switching principle and electro-optic characteristics of the device are reported herein.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.392-395
• /
• 2015

Metal Mono Chalcogenides(MMC)는 각각의 III족 metal 원자당한개의 chalchogen 원자를 갖고 있는(MX, M=Ga and In, X=S, Se, and Te)층상구조 화합물이다. MMC가 주목받는 가장 큰 이유는 single tetralayer MMC(SL-MMC)라는 2차원 구조를 갖기 때문이다. 2차원 물질은 다양한 물리적 현상을 증명하기 용이하다는 특징을 갖는다. 이 논문에서 우리는 SL-MMC중 Ga-MMC에서 chalchogen 원자가 변화함에 따라 바뀌는 실험 lattice constant를 조사하여 band gap과 formation energy를 Density Function Theory(DFT)로 계산했다.

• 구강회복응용과학지
• /
• 제30권1호
• /
• pp.16-22
• /
• 2014

목적: 본 연구의 목적은 동일한 모형에서 제작된 지르코니아 single 코핑과 3-unit 구조물의 변연 및 내면 적합도를 평가하는 것이다. 연구 재료 및 방법: 상악 우측 제2소구치가 상실되고 상악 제1소구치와 제2대구치가 지대치로 형성된 에폭시 모형(epoxy model)을 제작한 후 레이저 스캐너를 이용하여 스캔 하였다. CAD 소프트웨어를 이용하여 지르코니아 구조물을 디자인하고 CAM을 사용하여 지르코니아 single 코핑과 3-unit 구조물을 제작 하였다. 지르코니아 single 코핑은 상악 제1소구치, 제2대구치에서 각각 10개씩 제작 되었고 지르코니아 3-unit 구조물도 10개가 제작 되었다. 적합도 측정을 위하여 제작된 실리콘 복제(silicone replica)를 4등분하고 각 면의 측정 위치(P1, P2, P3, P4, P5)에서 디지털 현미경을 사용하여 적합도를 측정하였다. 각 위치에서 측정된 불일치 값들은 변연 불일치(MG, P1), 축 불일치(AG, P2와 P3의 평균), 교합 불일치(OG, P4와 P5의 평균)의 세 범주로 분류하였다. 결과: Single 코핑에서 변연 불일치의 범위는 18.47 - 40.54 ${\mu}m$, 축 불일치의 범위는 39.73 - 73.61 ${\mu}m$, 교합 불일치의 범위는 116.90 - 134.69 ${\mu}m$이었다. 3-unit 구조물에서 변연 불일치의 범위는 45.95 - 87.44 ${\mu}m$이고, 축 불일치의 범위는 23.78 - 57.00 ${\mu}m$이고, 교합 불일치는 99.89 - 131.06 ${\mu}m$이었다. 결론: 본 연구의 결과에 따르면 single 코핑에 비해 3-unit 구조물의 변연 불일치가 증가하였지만 임상학적 수용 범위(- 120 ${\mu}m$) 내에 있었으며 3-unit 구조물의 불일치 증가를 방지하기 위해서 더욱 균질한 지르코니아 블록 사용과 소결공정들을 조절해야 할 것이다.

• Journal of Information Display
• /
• 제5권3호
• /
• pp.14-17
• /
• 2004

We have developed a new type of transflective liquid crystal display (LCD) with a single cell gap and a single LC mode. In our transflective configuration, a single LC mode of a 60$^{\circ}$ twisted nematic LC was used for both transmissive and reflective applications. The measured electro-optic characteristics of our transflective LC cell agree well with numerical simulation results. Moreover, the transmittance was found to show similar behavior to the reflectance.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.209-213
• /
• 2004

The objective of this paper is to introduce the noise reduction characteristics of a double gap system, which is composed of two air-gaps and two partition sheets. The resonance of acoustic modes of an enclosed cavity can be effectively suppressed by installing the double gap system in the cavity. It is revealed from a simple, one-dimensional model that the double gap system is more effective than the single gap system that consists of one air-gap and one partition sheet, in that the former requires a smaller space than the latter. Finally, these theoretical conclusions are verified by comparison experiments using an actually manufactured enclosed cavity, of which the boundary surfaces are made of thick panels that can be assumed as rigid walls.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.91-96
• /
• 2015

As many researchers are relentlessly trying to improve the power generation schemes from the power grid, to meet the constantly increasing electricity demand. In this paper, the results of a finite element analysis are carried out to study on a design optimization of an asymmetric air-gap structure in 3-phase Permanent Magnet Brushless DC Motors. To achieve a high efficiency for a 3-phase PM BLDC motor, the asymmetric air-gap structure is proposed considering the rotation direction of a motor. Generally, a single-phase BLDC motor is applied asymmetric air-gap structure for starting. This is because the asymmetric air-gap structure causes reluctance variation so the motor can utilize reluctance torque toward a rotation direction. In this paper, the asymmetric air-gap is applied to 3-phase BLDC SPM motor so it utilizes reluctance torque with alignment torque. A proposed model is designed by 2-D FE analysis and the results are verified by experimental test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.97-98
• /
• 2007

A stoichiometric. mixture of evaporating materials for $CuGaSe_2$ single crystal thin films was prepared from horizontal electric furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuGaSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.615\;{\AA}$ and $11.025\;{\AA}$, respectively. To obtain the single crystal thin films, $CuGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $450^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuGaSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $4.87{\times}10^{17}\;cm^{-3}$ and $129\;cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;=\;1.7998\;eV\;-\;(8.7489\;{\times}\;10^{-4}\;eV/K)T^2/(T\;+\;335\;K)$.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권2호
• /
• pp.85-90
• /
• 2003

In this work $Cd_{4}GeSe_{6}$ and $Cd_{4}GeSe_{6}$ : $Co^{2+}$ single crystals were grown by the chemical transport reaction method and the structure of $Cd_{4}GeSe_{6}$ and $Cd_{4}GeSe_{6}$ : $Co^{2+}$ single crystals were monoclinic structure. The temperature dependence of optical energy 9ap was fitted well to Varshni equation. Also, the entropy, enthalpy and heat capacity were deduced from the temperature dependence of optical energy gap.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1002-1005
• /
• 2006

In this study, we fabricated white organic light emitting devices (WOLEDs) to use single emission layer, DPVBi with partially doped Rubrene. To realize white color, rubrene with 3.6% was partially doped with the gap from interface between DPVBi and hole transport layer NPD in a definite DPVBi layer. As the gap was increased, the intensity of orange peak grows less and less. The WOLED with gap of $5\;{\AA}$ has the best color stability and its color coordination is (0.345, 0.321) at 6V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.42-46
• /
• 2000

${\beta}{\cdot}In_2S_3$ 및 ${\beta}{\cdot}In_2S_3:Co^{2+}$ 은 $In_2S_3$+S+ZnS를 출발물질로 하여 ($ZnCl_2+I_2$)를 수송매체로 사용한 chemical transport reaction method로 성장시켰다. 성장된 단결정은 tetragonal structure를 갖고 298K에서 indirect optical energy gap은 2.240eV, 1.814eV로 각각 주어졌고, direct optical energy gap은 2.639eV, 2.175eV로 각각 주어졌다. ${\beta}{\cdot}In_2S_3:Co^{2+}$ single crystal에서 impurity optical absorption peak가 나타났으며, 이들 peaks의 origin은 $Co^{2+}(Td)$ ion의 energy level 간의 electron transition임을 crystal field theory를 적용하여 규명하였다.