• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.402-406
• /
• 1988

The MgGa2Se4 single crystal for study of optical properties is for the first time grown by Bridgmna method. The crystal structure of grown MgGa2Se4 single crystal has the Rhomobohedral structure (R3m) and its lattice constant are a=3.950\ulcorner c=38.893\ulcornerin Hexagonal structure. The energy band structure of grown MgGa2Se4 single crystal structure has direct band gap and the optical energy gap measured from optical absorption in this crystal is 2.20eV at 290K. The temperature dependence of energy gap was given Eg(T)=Eg(O)-aT\ulcorner)B+T), from varshni equation, where Eg(O)=2.34eV, a=8.79x10**-4eV/and b=250K.

• 한국전기전자재료학회논문지
• /
• 제28권8호
• /
• pp.518-523
• /
• 2015

We fabricate a single particle-microcapsule type electronic paper using electrophoresis, which is different with a reported dual particle-microcapsule type and of which electro-optical researches are not reported. So we analyzed a basic properties, such as reflectivity, response time, and driving voltage. Our display panels having various cell-gaps of $30{\mu}m$, $34{\mu}m$, $38{\mu}m$, $42{\mu}m$, and $46{\mu}m$ are inspected. As a results, a driving voltage is defined to 10 V and desirable cell-gap is $30{\mu}m$ or $34{\mu}m$. Considering a mechanical strength, the optimum cell-gap is $34{\mu}m$ for the single particle type electronic paper.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.174-179
• /
• 2005

We have designed a novel single cell gap transflective display associated with dual orientation of the liquid crystal. Owing to hybrid alignment in reflective part, the effective cell retardation value becomes half of cell retardation value in transmissive part where the LCs are homogeneously aligned. This study shows the possibility to manufacture the transflective display with a single gamma curve for reflective and transmissive region. The new device shows a high image quality with relatively easy fabrication.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.76-83
• /
• 2001

This paper is concerned with the analysis of the forming characteristics of radial-backward extrusion. The single action pressing is analyzed by using the rigid-plastic FEM. The design factors such as die corner radius, gap height, and friction factor are involved in the simulation. The analysis is focused on the influences of the design factors on the maximum punch farce and metal flow into can and flange region. As a result of analysis, the gap height among the design factors is known to have a major effect on the metal flow of radial-backward extrusion for single action pressing compared with other design factors. As is expected, forming load and volume of flange increase as gap height and die corner radius increase, respectively.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1068-1071
• /
• 2007

When a dielectric layer, in-cell retarder (ICR) is formed between electrode and LC layer to get a single gap transflective fringe-field switching (FFS) display, the operating voltage ($V_{op}$) is highly increased due to the thickness of dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the Vop and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.388-389
• /
• 2007

A transflective liquid crystal displays driven by fringe field switching mode of new concept is being suggested. The FFS mode is known to have the different twist angle distribution at the position when an operating voltage is applied. We make the cell design by using the different twist angle which has some region decided on transmissive region and other region used to reflective region. By optimizing simulation condition in the concept, we proposed new tansflective LCDs using FFS mode with single gap and single gamma characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.421-422
• /
• 2007

The fringe electric field driven transflective liquid crystal display with dual orientation has a problem that the voltage-dependent transmittance and reflectance curves do not match each other, requiring a dual driving circuit to achieve a high electro-optic performance. Optimizations of the electrode structure in the array substrate and rubbing direction solve this problem so that the transflective display with a single gap and a single gamma curve for reflective and transmissive region is possible.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.435-436
• /
• 2007

In general, Single gap transflective FFS display has an in-cell retarder (ICR) between reflective electrode and liquid crystal (LC) layer. Therefore, Operating voltage is highly increased due to this thick dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the V op and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.375-383
• /
• 2021

We present a simulation method to design antireflection coating (ARCs) for fiber-coupled superconducting nanowire single-photon detectors. Using a finite-element method, the absorptance of the nanowire is calculated for a defined unit-cell structure consisting of a fiber, ARC layer, nanowire absorber, distributed Bragg reflector (DBR) mirror, and air gap. We develop a method to evaluate the uncertainty in absorptance due to the uncontrollable parameter of air-gap distance. The validity of the simulation method is tested by comparison to an experimental realization for a case of single-layer ARC, which results in good agreement. We show finally a double-layer ARC design optimized for a system detection efficiency of higher than 95%, with a reduced uncertainty due to the air-gap distance.

• Wind and Structures
• /
• 제30권4호
• /
• pp.367-378
• /
• 2020

Two-dimensional Delayed Detached Eddy Simulation (DDES) was carried out to investigate the uniform flow over a twin-box bridge deck (TBBD) with various gap ratios of L/C=5.1%, 12.8%, 25.6%, 38.5%, 73.3% and 108.2% (L: the gap-width between two girders, C: the chord length of a single girder) at Reynolds number, Re=4×104. The aerodynamic coefficients of the prototype deck with gap ratio of 73.3% obtained from the present simulation were compared with the previous experimental and numerical data for different attack angles to validate the present numerical method. Particular attention is devoted to the fluctuating pressure distribution and forces, shear layer reattachment position, wake velocity and flow pattern in order to understand the effects of gap ratio on dynamic flow interaction with the twin-box bridge deck. The flow structure is sensitive to the gap, thus a change in L/C thus leads to single-side shedding regime at L/C≤25.6%, and co-shedding regime at L/C≥35.8% distinguished by drastic changes in flow structure and vortex shedding. The gap-ratio-dependent Strouhal number gradually increases from 0.12 to 0.27, though the domain frequencies of vortices shedding from two girders are identical. The mean and fluctuating pressure distributions is significantly influenced by the flow pattern, and thus the fluctuating lift force on two girders increases or decreases with increasing of L/C in the single-side shedding and co-shedding regime, respectively. In addition, the flow mechanisms for the variation in aerodynamic performance with respect to gap ratios are discussed in detail.