• 한국지능시스템학회논문지
• /
• 제11권4호
• /
• pp.302-306
• /
• 2001

얼굴인식은 이미지의 많은 변동(표정, 조명, 얼굴의 방향 등)으로 인해 한 가지 인식 방법으로는 높은 인식률을 얻기 어렵다. 이러한 어려움을 해결하기 위해, 여러 가지 정보를 융합시키는 데이터 퓨전 방법이 연구되었다. 기존의 데이터 퓨전 방법은 보조적인 생체 정보(지문, 음성 등)를 융합하여 얼굴인식기를 보조하는 방식을 취하였다. 이 논문에서는 보조적인, 생체 정보를 사용하지 않고, 기존의 얼굴인식방법을 통해 얻어지는 상호보완적인 정보를 융합하여 사용하였다. 개별적인 얼굴인식기의 정보를 융합하기 위해, 전체적으로는 Dempster-Shafer의 퓨전이론에 근거하면서, 핵심이 되는 질량함수를 새로운 방식으로 재정의학 퓨전모델을 제안하였다. 제안된 퓨전모델을 사용하여 개별적인 얼굴인식기의 정보를 융합한 결과, 보조적인 생체정보 없이, 개별적인 얼굴인식기보다 나은 인식률을 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제28권3호
• /
• pp.217-224
• /
• 2017

본 논문에서는 항공기 식별을 위해 서로 보완적인 특성을 갖는 HRRP 구분기와 JEM 구분기를 융합하여 식별하는 방법을 제안한다. 다양한 상황에서 단일 구분기보다 향상된 식별성능을 얻기 위하여 식별결과에 대한 구분기의 신뢰도를 가중치로 융합하는 방법을 제안한다. 신뢰도는 구분기의 식별성능으로부터 추정된 사후확률로 정의되며 식별결과에 대한 확신도 및 관측각도에 따라 변하는 특성을 가진다. 시뮬레이션 데이터를 사용한 식별실험을 통해 제안한 융합 방법이 단일 구분기를 효과적으로 융합하여 향상된 식별성능을 얻을 수 있음을 확인하였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제3권2호
• /
• pp.82-86
• /
• 1998

The maltose binding protein (MBP) fusion protein system is a versatile tool to express and isolate recombinant proteins in E. coli. In this system, MBP fusion proteins are efficiently isolated from whole cell lysate using amylose conjugated agarose beads and then eluted by competition with free maltose. Since MBP is a rather large molecule (∼42 kDa), for further experiments, the MBP part is usually proteolytically cleaved from the fusion protein and subsequently removed by ion-exchange chromatography or rebinding to amylose columns after washing out excess and MBP-bound maltose. In the present study, we have developed an improved method for the removal of cleaved MBP, which is advantageous over conventional methods. In this method, factor Xa cleaved MBP fusion proteins were incubated with Sepharose beads conjugated with MBP specific monoclonal antibodies and then precipitated buy centrifugation, resulting in highly purified proteins in the supernatant.

• Bulletin of the Korean Chemical Society
• /
• 제27권2호
• /
• pp.281-285
• /
• 2006

Microbial fuel cells (MFC) stacked with bipolar plates have been constructed and their performance was tested. In this design, single fuel cell unit was connected in series by bipolar plates where an anode and a cathode were made in one graphite block. Two types of bipolar plate stacked MFCs were constructed. Both utilized the same glucose oxidation reaction catalyzed by Gram negative bacteria, Proteus vulgaris as a biocatalyst in an anodic compartment, but two different cathodic reactions were employed: One with ferricyanide reduction and the other with oxygen reduction reactions. In both cases, the total voltage was the mathematical sum of individual fuel cells and no degradation in performance was found. Electricity from these MFCs was stored in a supercapacitor to drive external loads such as a motor and electric bulb.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.70-77
• /
• 2024

A low energy ion irradiation system based on the deuterium arc ion source with a high perveance of 1 µP for a single extraction aperture has been successfully developed for the investigation of ion irradiation on plasma-facing components including the first mirror of plasma optical diagnostics system. Under the optimum operating condition for mirror testing, the ion source has a beam energy of 200 eV and a current density of 3.7 mA/cm². The ion source comprises a magnetic cusp-type plasma source, an extraction system, a target system with a Faraday cup, and a power supply control system to ensure stable long time operation. Operation parameters of plasma source such as pressure, filament current, and arc power with D₂ discharge gas were optimized for beam extraction by measuring plasma parameters with a Langmuir probe. The diode electrode extraction system was designed by IGUN simulation to optimize for 1 µP perveance. It was successfully demonstrated that the ion beam current of ~4 mA can be extracted through the 10 mm aperture from the developed ion source. The target system with the Faraday cup is also developed to measure the beam current. With the assistance of the power control system, ion beams are extracted while maintaining a consistent arc power for more than 10 min of continuous operation.

• Journal of Korean Neurosurgical Society
• /
• 제30권4호
• /
• pp.493-500
• /
• 2001

Objective : Anterior cervical locking plates are the devices for achieving anterior cervical spinal fusion. This study was conducted to evaluate the locking plate system regarding its long-term advantages and disadvantages in the view of interbody fusion rate, hardware-related failures, vertebral change close to the fusion segment and postoperative complications. Method : Eight-six patients, operated from Jan., 1996 to Jun. 1998, were followed-up for more than two years. All of the cases were fused with iliac bone graft and ORION locking plate(Sofamor Danek USA, Inc., Memphis, TN) fixation. The patients were discharged or transferred to rehabilitation department 2-7 days after operation. A comprehensive evaluation of the interbody fusion state, instrument failure, vertebral change and postoperative complications were made by direct interview and cervical flexion-extension lateral plain films. Results : There were 55 male and 31 female with a mean age of 45 years(18-75 years). The mean follow-up period was 29 months(24-43 months). Various disorders that were operated were 40 cervical discs, 6 cervical stenosis including OPLL, 2 infections, and 38 traumas. Fusion level was single in 59 cases, two levels of each disc space in 15 cases, and two levels after one corpectomy in 12 cases. There was no instrument failure. Pseudoarthrosis was observed in two cases(2%) without radiological instability. The other patients(98%) showed complete cervical fusion with stable instrument. Mild settling of interbody graft with upward migration of screws was found in 12 cases(14%). Anterior bony growth at the upper segment was found in 5 cases(6%). Postoperative foreign body sensation or dysphagia was observed in 12 cases(4%), and disappeared within one month in 7 cases and within six months in 4 cases. One patient complained for more than six months and required reoperation to remove paraesophageal granulation tissue. Conclusion : The results show that Orion cervical locking plate has some disadvantages of upward migration of screws, anterior bony growth at the upper segment, or possibility of esophageal compression even though it has advantages of high interbody fusion rate or low instrument failure. Author believe that anterior cervical locking plate in the future should be thinner, and should have short end from the screw hole, and movable screw with adequate stability.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권4호
• /
• pp.23-28
• /
• 2008

As a part of the plasma control system (PCS) for the first plasma campaign of KSTAR, seven sets of fast feedback control loop for the superconducting poloidal field magnet power supply (PF MPS) have been implemented. A special real-time digital communication interface has been developed for the simultaneous exchanges of the current/voltage data from the 7 sets of 12-thyristor power supplies in a 200 microsecond control cycle. Preliminary power supply tests have been performed before actual cooldown of the device. A $29mH/50m{\Omega}$ solenoid dummy has been fabricated for a series of single power supply tests. Connectivity and response speed of the plasma control system have been verified. By changing hardware cabling, this load was also used to estimate mutual inductance coupling effects of two geometrically adjacent solenoid coils on each power supply. After the cooldown was complete, each pair of the up/down symmetric PF coils has been serially connected and tested as part of the device commissioning process. Bipolar operation and longer pulse attempts have been investigated. The responses of the coils and power supplies corresponding to the plasma magnetic controls in plasma discharges are also analyzed for the future upgrades.

• 대한소아치과학회지
• /
• 제27권3호
• /
• pp.383-387
• /
• 2000

융합(fusion)은 발육하고 있는 두 개의 독립된 치아가 상아질이나 법랑질부위에서의 결합으로 정의되며 보통 분리된 치근관과 단일의 큰 치관을 특징으로 하며 쌍생(gemination)은 단일치배내에서 조직의 함입으로 두 개의 치아로의 불완전한 형성을 이루는 발육상태로 정의되며 일반적으로 단일치근관과 큰 치관의 특징을 보인다. 융합이 정상치열의 두 개 치아사이에서 발생되었다면 치아수가 부족하게 되며 과잉치와 정상치아 사이에서 발생되었다면 정상치아수를 보일 것이며 이것은 방생과의 감별진단을 어렵게 한다. Brook과 Winter는 이러한 혼돈을 피하기 위해 'Double tooth' 라는 단어를 사용하였다. 일반적으로 증세는 없으나 임상적으로는 심미적인 문제와, 우식의 호발 치주적 문제, 치열의 문제를 보일 수 없다. 치료는 유치의 경우 일반적으로 치료가 불필요하며 영구치의 경우 심미적인 문제등으로 환자나 보호자에 의해 치료가 요구되어지기도 한다. 본 증례는 하악 영구측절치의 Double tooth로 내원한 8세된 여아로서 편측절단술(hemisection)과 치근단형성술을 시행후 비교적 양호한 결과를 얻었기에 이에 대해 보고하는 바이다.

• Nuclear Engineering and Technology
• /
• 제40권6호
• /
• pp.451-458
• /
• 2008

After more than 10 years construction, KSTAR (Korea Superconducting Tokamak Advanced Research) had finally completed its assembly in June 2007, and then achieved the goal of first-plasma in July 2008 through the four month's commissioning. KSTAR was constructed with fully superconducting magnets with material of $Nb_3Sn$ and NbTi, and their operation temperatures are maintained below 4.5K by the help of Helium Refrigerator System. During the first-plasma operation, plasmas of maximum current of 133kA and maximum pulse width of 865ms were obtained. The KSTAR Integrated Control System (KICS) has successfully fulfilled its missions of surveillance, device operation, machine protection interlock, and data acquisition and management. These and more were all KSTAR commissioning requirements. For reliable and safe operation of KSTAR, 17 local control systems were developed. Those systems must be integrated into the logically single control system, and operate regardless of their platforms and location installed. In order to meet these requirements, KICS was developed as a network-based distributed system and adopted a new framework, named as EPICS (Experimental Physics and Industrial Control System). Also, KICS has some features in KSTAR operation. It performs not only 24 hour continuous plant operation, but the shot-based real-time feedback control by exchanging the initiatives of operation between a central controller and a plasma control system in accordance with the operation sequence. For the diagnosis and analysis of plasma, 11 types of diagnostic system were implemented in KSTAR, and the acquired data from them were archived using MDSpius (Model Driven System), which is widely used in data management of fusion control systems. This paper will cover the design and implementation of the KSTAR integrated control system and the data management and visualization systems. Commissioning results will be introduced in brief.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.819-833
• /
• 2013

Computing global features based on local features using a bio-inspired framework has shown promising performance. However, for some tough applications with large intra-class variances, a single local feature is inadequate to represent all the attributes of the images. To integrate the complementary abilities of multiple local features, in this paper we have extended the efficacy of the bio-inspired framework, HMAX, to adapt heterogeneous features for global feature extraction. Given multiple global features, we propose an approach, designated as parameterized metric learning, for high dimensional feature fusion. The fusion parameters are solved by maximizing the canonical correlation with respect to the parameters. Experimental results show that our method achieves significant improvements over the benchmark bio-inspired framework, HMAX, and other related methods on the Caltech dataset, under varying numbers of training samples and feature elements.