• Journal of Korean Neurosurgical Society
• /
• v.54 no.6
• /
• pp.496-500
• /
• 2013

Objective : To evaluate the successful fusion rate in postmenopausal women with single-level anterior cervical discectomy and successful fusion (ACDF) and identify the significant factors related to bone successful fusion in pre- and postmenopausal women. Methods : From July 2004 to December 2010, 108 consecutive patients who underwent single-level ACDF were prospectively selected as candidates. Among these, the charts and radiological data of 39 women were reviewed retrospectively. These 39 women were divided into two groups : a premenopausal group (n=11) and a postmenopausal group (n=28). To evaluate the significant factors affecting the successful fusion rate, the following were analyzed : the presence of successful fusion, successful fusion type, age, operated level, bone mineral density, graft materials, stand-alone cage or plating with autologous iliac bone, subsidence, adjacent segment degeneration, smoking, diabetes mellitus, and renal disease. Results : The successful fusion rates of the pre- and postmenopausal groups were 90.9% and 89.2%, respectively. There was no significant difference in the successful fusion rate or successful fusion type between the two groups. In the postmenopausal group, three patients (10.8%) had successful fusion failure. In the postmenopausal group, age and subsidence significantly affected the successful fusion rate (p=0.016 and 0.011, respectively), and the incidence of subsidence in patients with a cage was higher than that in patients with a plate (p=0.030). Conclusion : Menopausal status did not significantly affect bone successful fusion in patients with single-level ACDF. However, in older women with single-level ACDF, the combination of use of a cage and subsidence may unfavorably affect successful fusion.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.180-185
• /
• 2001

Objectives : We retrospectively studied the efficacy of anterior cervical discectomy and interbody fusion without plate fixation in degenerative cervical disease. Methods : Thirty two consecutive patients with degenerative cervical disease treated by decompression and interbody fusion(Smith-Robinson technique) without anterior cervical plating were studied for postoperative complication rate as well as the clinical and radiologic outcomes and were compared the result of ours with other reported series where the anterior cervical plating was used. Results : All cases were reviewed after average period of 13 months for the purpose of this study. There were 4 postoperative complications related to grafting. A solid fusion was obtained in all cases with single-level fusion(n=21) and 81.8 % of the cases with a two-level fusion(n=11). The overall fusion rate was 93.8 % and fusion rate per level fused was 95.3%. The clinical outcome of the patients was comparable with that in the literature, with one patient having a poor result. Comparing the result of this study with others of the anterior cervical plating, clinical outcome and fusion rate were not superior in plate fixation group in single-level fusion, but increased fusion rate and decreased graft-related complication rate were noted in multilevel fusion with plate fixation. However, the clinical outcome was not superior to noninstrumented fusion group of this study. Conclusion : These results demonstrate that anterior cervical discectomy and interbody fusion(Smith-Robinson technique) without instrumentation is safe and reliable method of single-level fusion in degenerative cervical disease. Plate fixation system doesn't seem necessary in single level fusion in degenerative cervical disease.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.340-343
• /
• 2008

This work reports the simple fabrication of the single cell gap transflective liquid crystal display (LCD) using wire grid polarizer. The nano sized wire grid polarizer was patterned on common electrode itself, on the reflective part of FFS (Fringe field switching) mode whereas the common electrode was unpatterned at transmissive part. However, this structure didn't show single gamma curve, so we further improved the device by patterning the common electrode at transmissive part. As a result, V-T curve of proposed structure shows single gamma curve. Such a device structure is free from in-cell retarder, compensation film and reflector and furthermore it is very thin and easy to fabricate.

• Journal of Korean Foot and Ankle Society
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2011

Purpose: The purpose of this study was to compare the clinical and radiological results of single and double fusions in the transverse tarsal joint. Materials and Methods: Between December 2000 and April 2009, 16 patients (16 feet) who had been treated by fusion of transverse tarsal joint were included in this study. In 8 patients, only talonavicular joint was fused and in the other 8 patients, both talonavicular and calcaneocuboid joints were fused simultaneously. We have measured talo-first metatarsal angle, calcaneal pitch angle, talonavicular coverage angle and presence of adjacent joint arthritis for radiological assessment at both preoperative and last visit. Furthermore, we have evaluated Visual Analogue Scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS) score and patient's satisfaction. Results: In a single fusion group, VAS was improved from $6.4{\pm}1.4$ to $0.8{\pm}1.0$ (p=0.0011) and AOFAS score was improved from $63.8{\pm}6.2$ to $89.4{\pm}9.8$ (p=0.0012). In a double fusion group, VAS was improved from $8.0{\pm}0.75$ to $2.0{\pm}1.8$ (p=0.0011) and AOFAS score was improved from $60.5{\pm}11.2$ to $89.5{\pm}6.0$ (p=0.0012). In the difference of talo-first metatarsal angle between two groups, a single fused group was more improved than a double fused group (p=0.04). Conclusion: Both single and double fusions are useful and attractive treatment for the transverse tarsal joint arthritis. Furthermore, a single fusion has advantages of less invasiveness and preserving some degree of hindfoot motion and could be an effective alternative to a double fusion if patient meets appropriate criteria through careful preoperative evaluation.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1059-1067
• /
• 2021

In this paper, a HDR algorithm for a single image is proposed using the exposure fusion, that adaptively calculates gamma correction coefficients according to the image distribution. Since typical HDR methods should use at least three images with different exposure values at the same scene, the main problem was that they could not be applied at the single shot image. Thus, HDR enhancements based on a single image using tone mapping and histogram modifications were recently presented, but these created some location-specific noises due to improper corrections. Therefore, the proposed algorithm calculates proper gamma coefficients according to the distribution of the input image and generates different exposure images which are corrected by the dark and the bright region stretching. A HDR image reproduction controlling exposure fusion weights among the gamma corrected and the original pixels is presented. As the result, the proposed algorithm can reduce certain noises at both the flat and the edge areas and obtain subjectively superior image quality to that of conventional methods.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.193-201
• /
• 2020

The main objective of this study is to investigate the impact of additional modalities on the performance of emotion recognition using speech, facial expression and physiological measurements. In order to compare different approaches, we designed a feature-based recognition system as a benchmark which carries out linear supervised classification followed by the leave-one-out cross-validation. For the classification of four emotions, it turned out that bimodal fusion in our experiment improves recognition accuracy of unimodal approach, while the performance of trimodal fusion varies strongly depending on the individual. Furthermore, we experienced extremely high disparity between single class recognition rates, while we could not observe a best performing single modality in our experiment. Based on these observations, we developed a novel fusion method, called parametric decision fusion (PDF), which lies in building emotion-specific classifiers and exploits advantage of a parametrized decision process. By using the PDF scheme we achieved 16% improvement in accuracy of subject-dependent recognition and 10% for subject-independent recognition compared to the best unimodal results.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.442-453
• /
• 2020

Underwater color images suffer from low visibility and color cast effects caused by light attenuation by water and floating particles. This study applied single image enhancement techniques to enhance the quality of underwater images and compared their performance with real underwater images taken in Korean waters. Dark channel prior (DCP), gradient transform, image fusion, and generative adversarial networks (GAN), such as cycleGAN and underwater GAN (UGAN), were considered for single image enhancement. Their performance was evaluated in terms of underwater image quality measure, underwater color image quality evaluation, gray-world assumption, and blur metric. The DCP saturated the underwater images to a specific greenish or bluish color tone and reduced the brightness of the background signal. The gradient transform method with two transmission maps were sensitive to the light source and highlighted the region exposed to light. Although image fusion enabled reasonable color correction, the object details were lost due to the last fusion step. CycleGAN corrected overall color tone relatively well but generated artifacts in the background. UGAN showed good visual quality and obtained the highest scores against all figures of merit (FOMs) by compensating for the colors and visibility compared to the other single enhancement methods.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.3
• /
• pp.219-224
• /
• 2010

Objective : A minimally invasive transforaminal lumbar interbody fusion (MIS TLlF) has recently been introduced. However, MIS TLlF is a technically challenging procedure. The authors performed retrospective analysis about MIS TLlF using a single interbody cage. Methods : Twenty-eight consecutive patients were treated by MIS TLlF. Of these 28 patients, 20 patients were included in this retrospective study. Perioperative, clinical, and radiologic outcomes were assessed. Clinical outcomes were assessed using Oswestry Disability Index (ODI) and Visual Analogue Scores (VAS). Fusion rates and cross-sections of operated spinal canals were assessed by CT. Results : Twelve patients underwent MIS TLlF at one segment and 8 patients at two segments (L3/4: 4, L4/5: 17, L5/S1: 7). Operation time for a single segment was 131.7 min and for two segment was 201.4 min, and corresponding blood losses were 208.3 mL and 481.2 mL, respectively. ODI and VAS scores were significantly improved at 6 months postop (ODI from 30.32 to 15.54, VAS from 7.80 to 2.20, p = 0.001) Twenty-two segments (78.6%) achieved grade I fusion, 4 segments (14.3%) achieved grade II, 2 segments (7.1%) achieved grade III and 0 segments achieved grade IV at 12 months. Postoperatively at 12 months, spinal canal cross sectional areas at disc spaces significantly increased from 157.5 to $294.3\;mm^2$ (p = 0.012). Conclusion : MIS TLlF achieved good clinical outcomes and high fusion rates. Our findings show that MIS TLlF performed with a single Interbody cage and a tubular retractor system can be used as a standard MIS TLlF technique.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.2
• /
• pp.45-56
• /
• 2013

The precise identification of vehicle positions, known as the vehicle localization problem, is an important requirement for building intelligent vehicle ad-hoc networks (VANETs). To solve this problem, two categories of solutions are proposed: stand-alone and data fusion approaches. Compared to stand-alone approaches, which use single information including the global positioning system (GPS) and sensor-based navigation systems with differential corrections, data fusion approaches analyze the position information of several vehicles from GPS and sensor-based navigation systems, etc. Therefore, data fusion approaches show high accuracy. With the position information on a set of vehicles in the preprocessing stage, data fusion approaches is used to estimate the precise vehicular location in the local map building stage. This paper proposes an efficient local map building scheme, which increases the accuracy of the estimated vehicle positions via V2V communications. Even under the low ratio of vehicles with communication modules on the road, the proposed local map building scheme showed high accuracy when estimating the vehicle positions. From the experimental results based on the parameters of the practical vehicular environments, the accuracy of the proposed localization system approached the single lane-level.

• The Journal of Korea Robotics Society
• /
• v.13 no.4
• /
• pp.230-236
• /
• 2018

3D depth perception has played an important role in robotics, and many sensory methods have also proposed for it. As a photodetector for 3D sensing, single photon avalanche diode (SPAD) is suggested due to sensitivity and accuracy. We have researched for applying a SPAD chip in our fusion system of time-of-fight (ToF) sensor and stereo camera. Our goal is to upsample of SPAD resolution using RGB stereo camera. Currently, we have 64 x 32 resolution SPAD ToF Sensor, even though there are higher resolution depth sensors such as Kinect V2 and Cube-Eye. This may be a weak point of our system, however we exploit this gap using a transition of idea. A convolution neural network (CNN) is designed to upsample our low resolution depth map using the data of the higher resolution depth as label data. Then, the upsampled depth data using CNN and stereo camera depth data are fused using semi-global matching (SGM) algorithm. We proposed simplified fusion method created for the embedded system.