• Journal of Chest Surgery
• /
• v.29 no.2
• /
• pp.251-253
• /
• 1996

In the surgical repair of tetralogy of Fallot, the anomalous origin of the coronary artery has significant surgical implication. The coronary anomalies of concern are origin of the anterior descending coronary artery from the right coronary artery and certain variations of single coronary branching. We experienced a case of tetralogy of Falloff with single coronary artery from the left coronary sinus, from which the right coronary artery originated crossing the right ventricular outflow tract. This ty e of coronary anomaly in tetralogy of Fallot is known to be extremly rare.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.99-100
• /
• 2016

본 논문에서는 위치 센서 없이 단상 모터를 운전하는 방법을 제안한다. 제안하는 센서리스 방식은 PM flux 추정기와 PLL 옵저버를 이용하여 구현된다. 이를 통해 홀 센서로 인한 조립상의 문제와 부피 증가 문제를 해결 할 수 있다. 또한 효율적인 운전을 위하여 0 속도가 아닌 파워가 다시 들어올 때 모터를 다시 구동하는 재 시작 전략 또한 제안한다. 이 방식은 위치 센서가 존재 하지 않기 때문에 재 시작시의 각도를 구하기 위한 0 전류 제어와 함께 전압의 zero crossing을 이용한다.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1642-1649
• /
• 2018

A single-stage flyback LED AC-DC converter based on primary-side control under constant current mode is proposed in this study. The proposed converter features low total harmonic distortion (THD) and high power factor (PF). It also consists of a zero-crossing distortion compensation circuit and a variable duty ratio control compensation circuit to deal with the line current distortions caused by fixed duty ratio control. The system model and layout are built in Simplis and Cadence, respectively. The feasibility and performance of the proposed circuit is verified by designing and fabricating an IC controller in the HHNEC $0.35{\mu}m$ 5 V/40 V HVCMOS process. Experimental results show that the PF can reach a level in the range of 0.985-0.9965. Moreover, the average THD of the entire system is approximately 10%, with the minimum being 6.305%, as the input line voltage changes from 85 VAC to 265 VAC.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.1
• /
• pp.124-132
• /
• 2023

This study aimed to cross between Korean and Japanese pure lines of Neopyropia strains to establish cross breeding technology and identify a superior variety that harbors the strength of both parents. Four crossing combinations were tried using three methods, resulting in 1,476 single conchocelis colonies. The three co-dominant Cleaved Amplified Polymorphic Sequence (CAPS) markers (EF-1α/Mse I, TOP2/Mse I, car A/ApaL I) were used to distinguish heterozygotic sporophytes and their maternal lines obtained from the inter and intraspecific cross-fertilization within the wild type of Neopyropia strains. Of the 1,476 colonies, 26.9% (218) were heterozygotes obtained from the nuclear CAPS markers. Their maternal line was clearly confirmed using organelle CAPS marker and chimeric thallus was obtained from crossing experiment of Japanese N. yezoensis (♀) and Korean N. yezoensis (♂). The use of CAPS markers improved the efficiency of crossbreeding by quickly screening heterozygotes and maternal lines in the conchocelis phase, which otherwise required pigmentation mutants as genetic markers.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.98-106
• /
• 2013

In this paper, we propose a moving object detection and tracking method for multi-view camera environment. Based on the similarity and characteristics of motion vectors and coding block modes extracted from compressed bitstreams, validation of moving blocks, labeling of the validated blocks, and merging of neighboring blobs are performed. To continuously track objects for temporary stop, crossing, and overlapping events, a window based object updating algorithm is proposed for single- and multi-view environments. Object detection and tracking could be performed with an acceptable level of performance without decoding of video bitstreams for normal, temporary stop, crossing, and overlapping cases. The rates of detection and tracking are over 89% and 84% in multi-view environment, respectively. The rates for multi-view environment are improved by 6% and 7% compared to those of single-view environment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.5
• /
• pp.71-85
• /
• 1993

The Cycloconverter that the author is going to treat in this paper, has strong advantages over the D.C. Link Inverter in points of chattering torque problem and natural commutation. Thus, the Cycloconverter is expected to be well applied to large and low-speed machines which require better speed control at low frequency. But the control circuit of Cycloconverter has two weak points described as follows. 1) Because of its rather complicated control circuit, it is likely to be illoperating due to unexpected noise signals, thus the higher the accuracy and reliability of the circuit is required to be, the more the circuit may cost. 2) Because the load current is not purely sinusoidal, the Cycloconverter may possibly be destroyed in case of inaccurate convert switching resulted from the difficulties in detecting the load current-zero and the current direction at the moment. In this paper, the author first of all intends to design and build a modified VVVF-type Noncirculating Current Cycloconverter to which recently proposed control methods are applied for improving the circuit simplicity, the control performance, and the system reliability. And then, experiments for observing the output waveforms of the Cycloconverter which is controlled by Singled-Board Computer using 8086 16-bit microprocesser are carried out. Finally the author concludes the result of this study as follows. 1) By replacing the conventional analog control circuits such as Reference Wave Generator, Cosine Timing Wave Generator, and Comparator with softwares, a great circuit simplicity is achieved. 2) The output of the designed Cycloconverter changes its frequency very fast without showing discontinuity of its waveform, and this waveform characteristics enables the smooth speed control of Induction Motor. 3) The design control circuit of Cycloconverter can be applied to the systems of 12 or 24 pulses because of its short processing period.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.521-522
• /
• 2016

This paper presents a novel scheme to estimate the rotor position of a single-phase hybrid switched reluctance motor (HSRM). The proposed method uses the differential of back-EMF within a position region to estimate rotor position. By detecting the crossing-zero signal of back-EMF differential value, the minimum position of back-EMF corresponding to an absolute rotor position can be captured and used for position estimation four times in every mechanical rotation. In this way, a sensorless operation with adjustable turn on/off angle can be achieved without substantial computation. For the starting, two current comparators are adopted. The experimental verification using a prototype drive system is provided to demonstrate the viability of the proposed sensorless scheme.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.63-67
• /
• 1993

In single-layer latticed domes with two-way grid, if we use the cross-membered junction's method for the advantage in fabrication and construction, the eccentricity is occurred in the nodal point of crossing members. This paper is aimed at investigating the buckling characteristics for the effect of eccentricity. Analysis method is based on FEM dealing with the geometically nonlinear deflection problems. As a result of the study, in the case of having eccentricity, the values of buckling strength are about 0.7 times than or not but the characteristics of buckling and deflection except buckling strength have a similar tendency each other.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.216-217
• /
• 2010

This paper presents a new software-based on-line dead-time compensation technique for single-phase grid-connected photovoltaic (PV) inverter system. To improve the mitigation of dead-time effect around the zero-crossing point of phase current, a selective harmonic elimination of instantaneous feedback current is used as an additional part of conventional current control scheme. Simulation and experimental results are shown to verify the effectiveness of proposed compensation method in the grid-connected power distributed generation systems.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.91-93
• /
• 2008

In this paper, novel phase angle following algorithm for the single phase grid-connected inverter is proposed. Gird-connected inverter needs phase angle detection for synchronization grid voltage with the inverter output. In case of single phase grid-connected inverter, zero crossing detection and virtual 2-phase PLL using digital all pass filter or digital low pass filter are used conventionally. But these methods have a weakness for harmonics, noises and ripples. The proposed method of PLL achieve DFT(Discrete Fourier Transform) using Goertzel algorithm. It can extract fundamental voltage of grid. As a results, it can obtain phase angle using digital all pass filter without effect of harmonics, noises and ripples. Simulation results are presented to demonstrate the effectiveness of the proposed algorithm.