• Tribology and Lubricants
• /
• v.27 no.6
• /
• pp.314-320
• /
• 2011

Although swash-plate type axial piston pumps have the merits of wide operating conditions and high efficiency, the characteristics of pressure pulsation and flow ripple which result in system noise generation are on-going problems. This research examined the analytic models of the dynamic oil pressure and flow characteristics in the pump. A new mathematical model which considered the pressure behaviors of each cylinder and discharge piping was developed to analyze the pump pressure and flow. This model also considered the leakages in the clearances which many researchers have ignored so far. Using the developed model, numerical calculations were implemented. The results showed that widely used simple model which considered only a single cylinder can not predict actual discrete flow dynamics and that fluid inertia effect has to be considered in the mathematical model. Several critical parameters were discussed such as port volume and discharge resistance on the assumption that the pipe length is not so long. The effect of leakages was studied on the final stage.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.3
• /
• pp.287-297
• /
• 2019

The recent increase in crude oil trading has led to an increase in the workings of SPM for crude oil carriers. VLCCs generally encounter difficulty entering port due to limitations in terms of sea depth and maneuverability. The SPM is a system that allows mooring to the buoy located in the outer sea for such vessels. However, the buoy is more affected by relatively external forces because of their of shore location. Therefore, the safety assessment of SPM is particularly important as it can lead to large oil pollution disasters in the event of SPM accidents. Despite this, in the implementation of the Marine Traffic Safety Audit Scheme in Korea, there exists no guidance for SPM. In this study, a SPM mooring safety assessment is performed using OPTIMOOR, a numerical analysis program, so as to understand the mooring characteristics of SPM. As a result, it is confirmed that the tension of mooring lines and hull movement in the SPM are greatly affected by the encounter angles with external forces. In addition, it is found that the maximum tension of the mooring line is elevated as the water depth becomes shallower through sensitivity analysis. According to SPM characteristics, which has a large influence on the encounter angle, this study has proposed an amendment to setting criteria in the implementation of the Maritime Traffic Safety Audit Scheme which could improve the reliability and accuracy of mooring safety assessments.

• Archives of Plastic Surgery
• /
• v.48 no.2
• /
• pp.194-198
• /
• 2021

Robot-assisted nipple-sparing mastectomy with immediate reconstruction is currently performed in an attempt to seek smaller and indistinct incisions. Robotic surgery system has been evolving under the concept of minimal invasive technique which is a recent trend in surgery. One of the latest version is the da Vinci SP Surgical System (Intuitive Surgical). In this report, we will share our experiences. Two patients underwent robot-assisted nipple-sparing mastectomy, each followed by immediate robot-assisted expander insertion and prepectoral direct-to-implant breast reconstruction, respectively. There was no open conversion or major postoperative complication. One patient experienced mild infection, which was resolved by intravenous antibiotic treatment. Simple docking process, multi-joint instruments, and thirdarm functionality are among the new surgical system's advantages. The present cases suggest that robot-assisted nipple-sparing mastectomy with immediate reconstruction using the da Vinci SP Surgical System is feasible and safe. The promising features and potential application of da Vinci SP in breast reconstruction need further study.

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.2 no.1
• /
• pp.85-109
• /
• 2022

Yiguandao missions arrived in Korea no later than 1947. Despite many obstacles, including war and internal dissension, the movement has flourished in South Korea. Today there are three active major lineages and another seven smaller networks. This article relates the movement's overall development in Korea. We begin by discussing key missions dispatched to Korea by Yiguandao's founder Zhang Tianran. The northern port city of Tianjin was key to this effort, in particular a single temple, the Hall of Morality. In Korea the leaders found an unfamiliar cultural landscape that was soon engulfed in war. The Yiguandao missions tended to develop independently, without coordination. In an effort to unify the movement, the Morality Foundation was established in Busan in 1952. The article shows how Yiguandao's subsequent success in Korea is connected to the development of indigenous leadership. Local Korean leadership ousted Chinese members from the Morality Foundation in 1954, and this branch has continued under Korean leadership to this day. The ousted Chinese leaders continued to develop their own lineages. Two major leaders, Zhang Ruiquan and Kim Bokdang, were able to establish enduring legacies. A final section looks at organizational traits that will determine the movement's future prospects in modern Korean society.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.4
• /
• pp.184-190
• /
• 2022

In an attempt to apply hybrid rocket to the RATO (Rocket-Assisted Take Off) system, combustion characteristics of the non-circular grain were figured out in this study. Having larger combustion area, it was reconfirmed that the non-circular grain has advantages over regression rate, characteristic velocity and chamber pressure in which all gave higher values. Experiments were performed to understand the effect of the non-circular grain geometry over time where local regression rates depending on grain location were analyzed. It was found that the regression rate of five distinct locations were different. Partial conclusion driven was that these differences are due to the heat transfer caused by dissimilar distances from the flame layer. Besides, as combustion duration increased, the fuel port became circular, and the regression rate converged to a single value over the whole grain.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.367-371
• /
• 2014

When the crew or passengers fall into the water due to marine accident of vessel, it is very important to rescue them quickly. In the case of marine accidents, most people in distress have been wearing a lifejacket, so if the GPS and Cospas-Sarsat communication module will be integrated within the lifejacket, it is easy to rescue them. In this paper, development of the dual band lifejacket-integrated antenna for GPS and Cospas-Sarsat communication is discussed. The antenna with the FR-4 substrate of 0.2mm thickness for flexibility was designed that it can be fitted close to the shoulder of the life jacket and operate at 1.575GHz and 406MHz. The GPS communication antenna was implemented with a ring-slot antenna having a circular polarized characteristic and a meander type linear polarized antenna is used as Cospas-Sarsat communication. The two antennas are fed by a single microstrip line and an open stub is used to minimize the mutual interference between the two antennas. The performance of the fabricated antenna attached to the life vest is confirmed by the measurement of the return loss at GPS and Cospas-Sarsat frequency bands.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.217-222
• /
• 2015

In this research, sea routes of domestic coaster liners between 2005 and 2013 were studied via social network analysis. Study of the sea routes revealed that they follow power-law in a scale-free form, a characteristic found often in social network. We have looked into centrality, which is a major standard in the field of social network analysis. We have also analyzed the annual changing trend in the centrality of the connectivity, examined the effect of quantity through the comparison with the original quantitative analysis method, and lastly, verified the relationship between the centrality of connectivity and mediation. Then, we were able to identify ports according to priority using these factors. This research assumed and interpreted the coaster liners route as a single network and suggested useful results. Based on these results, directing of development of domestic coaster liners route development and other factors will be achieved more smoothly. And if we utilize social network analysis method in other various fields - for example, the centrality of airport and the diplomatic realations analysis of the neighboring country - we will be able to effectively analyze events in diverse perspectives.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.107-108
• /
• 2014

As the demand for precise navigation has increased, more focus is put on the precise positioning, RTK(Real Time Kinematics) which has been used in the surveying field. The Position of Single Reference Station RTK or two-way network RTK such as VRS (Virtual Reference Station) is accurate enough to be used as a main technology in land surveying, however its service area and number of users is limited and the users are assumed static. This characteristic is not suitable to the navigation, whose service target is infinite number of users moving over a wide area. One-way network RTK has recently been suggested as a solution for the precise navigation technique for the mobile user. This paper shows the performance prediction of the one-way network RTK such as MAC(Master-Auxiliary Concept), or FKP (Flachenkorrekturparameter). To show the performance variation by the rover position, we constructed a simulation data of users on the grid with 0.1 degree spacing between 36.5 and 37 degree latitude and between 127 and 127.5 degree longitude.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.181-183
• /
• 2007

Copyright infringement and data piracy are pervasive problems of digital era and Electronic Navigational Charts(ENC) are not free from these issues. Aside from the economic impact, the unofficial distribution of nautical information has sign띠cant safeη concerns. Therefore, official distributors of nautical information have sought appropriate methods to protect their data and to provide the mariner with a certificate of authenticity through the adoption of security schema. However, a plethora of different security schema provided by independent distributors markedly complicates the software development of Electronic Chart Display and Information Systems (ECDIS) manufacturers and makes it more difficult to achieve the goal of seamless world-wide electronic navigational database easily accessible to the mariner. A fundamental concern of IHO is that adoption of a single, centrally administered security scheme for all ENCs could improve the ease of use of ENCs and enhance safety of navigation. IHO have driven protection scheme as S-63, S-63x. NORI(National Oceanographic Research Institute) necessarily need protection scheme and supporting system for nautical information. This paper presents protection scheme for NORI and proposes support system for ENC protection.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.573-581
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stacked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about $20\%$ compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.