• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.406-411
• /
• 2003

It is clearly demonstrated that deeper cups could be formed by single and double stretch-drawings from smaller circular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks. From this fact, it is emphasized that the deep-drawability of a sheet metal Is not evaluated simply by the conventional L.D.R (limiting drawing ratio), but the depth of the drawn cup should also be taken into account. Many experimental data about various metals and thicknesses given in this paper offer a valuable information in this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing, it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권4호
• /
• pp.221-226
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.338-343
• /
• 2010

Low cost motor drives are being sought for high volume energy efficient home appliances. Key to the realization of such low cost motor drives is to reduce the power electronic converter in terms of its components, particularly the active devices, finding the motor with least complexity for manufacturing and a controller that could extract the desired performance from the machine and converter combination. These and other factors such as self-starting, speed control over a wide range and most of all the crowning aspect of a four quadrant operation with bare minimum number of controllable switch (or switches) remain as formidable challenges for low cost motor drive realization. In this paper, a four quadrant switched reluctance motor (SRM) drive with only one controllable switch is realized by using a two-phase machine. The theory and operation of the proposed four-quadrant SRM drive with the proposed control algorithm for its realization are described. The motor drive is modeled, simulated and analyzed to verify its feasibility for self-starting, speed control and for four quadrant operation and the simulation results are presented. Experimental results confirm the validity of the proposed control algorithm for four quadrant control of the SRM drive. The focus of the paper is mainly directed toward the control algorithm for realizing the four-quadrant operation of the two-phase SRM drive with a single controllable switch converter.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.221-221
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1140-1153
• /
• 2016

Since the inception of nuclear power as a commercial energy source, safety has been recognized as a prime consideration in the design, construction, operation, maintenance, and decommissioning of nuclear power plants. The release of radioactivity to the environment requires the failure of multiple safety systems and the breach of three physical barriers: fuel cladding, the reactor cooling system, and containment. In this study, nuclear reactor containment pressurization has been modeled in a large break-loss of coolant accident (LB-LOCA) by programming single-cell and multicell models in MATLAB. First, containment has been considered as a control volume (single-cell model). In addition, spray operation has been added to this model. In the second step, the single-cell model has been developed into a multicell model to consider the effects of the nodalization and spatial location of cells in the containment pressurization in comparison with the single-cell model. In the third step, the accident has been simulated using the CONTAIN 2.0 code. Finally, Bushehr nuclear power plant (BNPP) containment has been considered as a case study. The results of BNPP containment pressurization due to LB-LOCA have been compared between models, final safety analysis report, and CONTAIN code's results.

• 전력전자학회논문지
• /
• 제16권6호
• /
• pp.561-568
• /
• 2011

본 논문은 단상 이중변환 무정전전원장치를 위한 단일 스위치 배전압 방식의 단상 PFC 컨버터의 동작 특성을 기술한다. 단일 스위치 배전압 방식의 단상 PFC 컨버터는 브릿지 다이오드와 양방향 능동 스위치 한 개만이 필요하며 재료비 절감이 가능하다. 하지만 이 회로가 제안된 후 동작 특성 및 제어기 설계에 대한 연구결과가 알려지지 않았다. 본 논문에서는 동작 특성과 제어기 설계방법을 기술하고 성능평가를 위해 단상 정격 3kVA 이중변환 무정전전원장치를 대상으로 실험을 수행하였다. 또한 실험을 통해 입력전류 제어, 입력역률 보상 성능을 확인하였다.

• 한국임상수의학회지
• /
• 제18권2호
• /
• pp.124-132
• /
• 2001

The purpose of this study is to know whether single layer continuous connell suture is an acceptable alternative to simple interrupted approximating suture for end-to-end intestinal anastomosis in dogs. Fourteen mixed-breed dogs weighing 2 to 5 kg were allotted to group treated with simple interrupted approximating suture (Group I) and group treated with single layer continuous Connell suture (Group II), each of 7 dogs. All dogs in each suture pattern were compared with time for total operation ad suture elapsed for intestines to anastomose, clinical signs, changing of pre-and postoperative luminal size, status of feces, adhesion at anastomotic site for 14 days after operation. Time for total operation and suture time for intestinal anastomosis were none significant between Group I and Group II, although those in Group II was about 3 minutes shorter than those in Group I, respectively. Group I spent average 47.08${\pm}$11.10 minutes on total operation, 20.97${\pm}$5.54 minutes on suture time for intestinal anastomosis and Group II spent average 44.74${\pm}$7.77 minutes, 17.73${\pm}$3.05 minutes, respectively. All dogs were no special differences in vitality, vomiting, appetite between Group I and Group II for 14 days after operation. All dogs, except one dog in Group I, had showed normal vitality and appetite since 6~8 days after operation. Initial return of fecal passage showed in all dogs before 6 days after operation and thereafter most dogs showed normal feces. According to results, it was thought that all dogs with normal vitality and appetite before 8 days had showed good prognosis. There were no changes of intestinal luminal size in 2 dogs performed Group In and one dog performed Group II between at operation and 14 days after operation. Narrowing rate of intestinal lumen in Group I was average 9.3% of the normal diameter, whereas in Group II, 9.5% of normal diameter. In complications after operation, only one dog in Group I showed intestinal intussusception but the others didn't. Length of adhesion was measured between intestinal anastomotic site and omental graft. Length of adhesion in dogs performed Group II was mostly shorter than that of Group I. Adhesion with proximate intestines occurred in five dogs, which consisted of 3 dogs performed Group I and 2 dogs performed Group II. Concurrently, they had a great length of adhesion between anastomotic site and omental graft. There were no great differences between Group I and Group II about speed of operation, clinical signs, complications such as leakage and stricture. And all dogs performed intestinal anastomosis showed good clinical condition and prognosis. In conclusion, Single layer continuous Connell suture can safely perform an intestinal anastomosis and be an alternative of simple interrupted approximating suture in aspect of speed clinically.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1998년도 제15회 광학 및 양자전자 학술발표회 논문집
• /
• pp.88-89
• /
• 1998

0.7 kHz linewidth, single-frdquency operation was achieved in apolarization-maintaining Er3+-doped filber ring laser at 1547.7 nm with a compact strure using a filber bragg grating (FBG) and a circulator. The single-frequency operation optput power was 3 mW.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.121-126
• /
• 2008

This paper analyzes the losses of a Steinmetz connection three-phase induction motor which is supplied by a single-phase source. The T-type equivalent circuit which is taken no-load losses into account is used to determine phase converter capacitive reactances at starting and rated speed by using the condition of the minimum voltage unbalance. The starting and the operating capacitor are replaced at the slip of the same voltage unbalance factor points which are depicted using two capacitive reactances. The operation characteristics are investigated by comparing with those of three-phase balanced operation to find the feasibility of single-phase operation. To analyze the losses of this motor, the output power decrease factor(OPDF), the loss ratio(LR), the no load loss ratio(NLLR), the copper loss ratio(CLR), the stator copper loss ratio(SCLR), and the rotor copper loss ratio(RCLR) are defined and simulated in the whole slip range. The simulated results show that OPDF is maintained almost uniformly, LR is low at low speed and high at high speed, CLR is higher !ban NLLR, but CLR varies concavely and NLLR varies convexly at high speed, SCLR is low at low speed and high at high speed, but SCLR varies convexly at high speed, and RCLR is nearly opposite to SCLR.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권6호
• /
• pp.273-281
• /
• 2001

In order to overcome the demerit and to improve the operation characteristics of Moving Coil type Linear Oscillatory Actuator(MC-LOA) with single-pole permanent magnet, this paper presents two models having the balanced magnetic circuit by multi-pole permanent magnet. They are short coil type with two-pole single-sided and two-ple double-sided permanent magnet. The characteristics between single-pole and multi-pole permanent magnet type MC-LOA are compared. As a result, multi-pole type MC-LOA has more merits than single-pole type about operation characteristics improvement and machine volume. The characteristics analysis is performed by their dynamic analysis composed of kinetic and electric equations and Finite Element Method(FEM). The propriety of multi-pole type MC-LOA model is verified with analysis results.