• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.4
• /
• pp.495-502
• /
• 2022

Web crawler, which is mainly used to collect text on the web today, is difficult to maintain and expand because researchers must implement different collection logic by collection channel after analyzing tags and styles of HTML documents. To solve this problem, the web crawler should be able to collect text by formalizing HTML documents to the same structure. In this paper, we designed and implemented WCTT(Web Crawling system based on Tag path and Text appearance frequency), a web crawling system that collects text with a single collection logic by formalizing HTML documents based on tag path and text appearance frequency. Because WCTT collects texts with the same logic for all collection channels, it is easy to maintain and expand the collection channel. In addition, it provides the preprocessing function that removes stopwords and extracts only nouns for keyword network analysis and so on.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.42-50
• /
• 2008

Unlike a cellular network, a mobile ad hoc network(MANET) is constructed only by mobile nodes without access point. Mobile nodes in MANET operate with scarce resources and restricted battery. If battery of intermediate node is exhausted, overall network might be diverged. Therefore, power-aware is really important. An on-demand multipath routing protocol which is proposed to compensate for shortcoming of on-demand single path routing protocol can reduce mute discovery overhead because route discovery starts only when all routes are disconnected. AOMDV(Ad hoc On-demand Multipath Distance Vector) which is on-demand multipath routing protocol based on AODV, reduces 40% of route discovery frequency. However, AOMDV have none of power-aware. So AOMDV have problem that route discovery for power exhaustion is not reduced at all. This paper proposes new power-aware path selection algorithm for AOMDV and scheme that broadcast REER packets when mobile node's battery can be gone. Performance comparison of proposed algorithm with AOMDV using ns-2 simulator shows that route discovery of proposed algorithm is reduced maximally 36.57% than AOMDV's.

• Journal of Veterinary Clinics
• /
• v.33 no.5
• /
• pp.278-285
• /
• 2016

Epidemiological studies have shown the association between transportation of live animals and the potential transmission of infectious disease between premises. This finding was also observed in the 2014-2015 foot-and-mouth disease (FMD) outbreak in Korea. Furthermore, slaughterhouses played a key role in the global spread of the FMD virus during the epidemic. In this context, in-depth knowledge of the structure of direct and indirect contact between slaughterhouses is paramount for understanding the dynamics of FMD transmission. But the social network structure of vehicle movements to slaughterhouses in Korea remains unclear. Hence, the aim of this study was to configure a social network topology of vehicle movements between slaughterhouses for a better understanding of how they are potentially connected, and to explore whether FMD outbreaks can be explained by the network properties constructed in the study. We created five monthly directed networks based on the frequency and chronology of on- and off-slaughterhouse vehicle movements. For the monthly network, a node represented a slaughterhouse, and an edge (or link) denoted vehicle movement between two slaughterhouses. Movement data were retrieved from the national Korean Animal Health Integrated System (KAHIS) database, which tracks the routes of individual vehicle movements using a global positioning system (GPS). Electronic registration of livestock movements has been a mandatory requirement since 2013 to ensure traceability of such movements. For each of the five studied networks, the network structures were characterized by small-world properties, with a short mean distance, a high clustering coefficient, and a short diameter. In addition, a strongly connected component was observed in each of the created networks, and this giant component included 94.4% to 100% of all network nodes. The characteristic hub-and-spoke type of structure was not identified. Such a structural vulnerability in the network suggests that once an infectious disease (such as FMD) is introduced in a random slaughterhouse within the cohesive component, it can spread to every other slaughterhouse in the component. From an epidemiological perspective, for disease management, empirically derived small-world networks could inform decision-makers on the higher potential for a large FMD epidemic within the livestock industry, and could provide insights into the rapid-transmission dynamics of the disease across long distances, despite a standstill of animal movements during the epidemic, given a single incursion of infection in any slaughterhouse in the country.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.67-74
• /
• 2004

AES is frequently used as a symmetric cryptography algorithm for the Internet. Wireless embedded systems increasingly use more conventional wired network protocols. Hence, it is important to have low-cost implementations of AES for thor The basic architecture of AES unrolls oかy one full cipher round which uses 20 S-boxes together with the key scheduler and the algorithm repeatedly executes it. To reduce the implementation cost further, the folded architecture which uses only eight S-box units was studied in the recent years. In this paper, we will study a low-cost AES implementation for wireless communication technology based on the folded architecture. We first improve the folded architecture to avoid the sixteen bytes of additional state memory. Then, we implemented a single byte architecture where only one S-box unit is used for data encryption and key scheduling. It takes 352 clocks to finish a complete encryption. We found that the maximum clock frequency of its FPGA implementation reaches about 40 MHz. It can achieve about 13 Mbps which is enough for 3G wireless communication technology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1141-1146
• /
• 2004

The antenna array for receiving satellite broadcasting of Koreasat III is proposed. A cavity-backed slot antenna array is proposed to reduce feed line loss, increase the radiation efficiency, and make the feed network simple. A sub-array consists of $2{\times}4$ slot elements backed by a single cavity. By proper choice of dimensions it is shown that the proposed antenna has characteristics of the high radiation efficiency and the broad frequency bandwidth. Antenna characteristics for the array antenna with 256 elements are measured in Ku-band. A single cavity backed-sub-array has the gain of 18 dEi. The gam of the total antenna array(256 elements) is Over 33 dEi.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.518-536
• /
• 2009

To verify the performance of a Distributed Translator Network(DTxR) system in the real world conditions, 5 legacy DTV broadcasting repeater sites were implemented with 5 DTxR systems and field-tested by the DTV field test truck. The 4 DTV broadcasting repeater sites are selected in congested areas where their service areas are overlapped and the 5th site is deviated from the other sites to examine the effect of long-delayed multipath signals. First of all, we checked the receiving signal of the main station that used as a transmitting signal in 5 DTxR systems on the pre-selected 60 test points and tested every case of a DTxR system's on & off except 1 repeater site due to the already built-in DTV repeater system. The test items are received signal electric field strength, noise margin, ease of reception and subjective evaluation of the picture quality for received signals. We used 3rd, 5th, and 6th generation DTV receivers to examine the differences of the receivability by each generation of DTV receivers. Reviewing the test results, we conclude that the DTxR system can be adopted in the current DTV Repeater sites and it could improve the quality and receivability of the main signals by extending the service areas and enhancing the signal levels in the shadow areas without using the extra broadcasting channels.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.131-142
• /
• 2015

In order to support the development of a cost-effective river bathymetric system, this research has focused on modeling GPS observables, which are obtained by array of five single-frequency receivers (i.e., two references and three rovers) to estimate the high accurate kinematic position, and the surveying vessel altitude. Also, by applying all GPS measurements as multiple-baselines with constraining rover baselines, we derived the socalled ‘kinematic network model.’ From the model, the integer-constrained least-squares (LS) for position estimation and the implicit LS for attitude determination were implemented, while a series of simulation tests with respect to the baseline lengths around 2km performed to demonstrate its accuracy analysis. The on-the-fly (OTF) ambiguity resolution tests revealed that ninety-nine percents of time-to-fix-first ambiguity (TTFF) can be decided in less than two seconds, when the positioning accuracy of ambiguity-fixed solutions was assessed as the greater than or equal to one and two centimeters in horizontal and vertical, respectively. Comparing to the GPS-derived attitudes, the achievable accuracy gradually descended in sequence of yaw, pitch and roll due to the antenna geometric configuration. Furthermore, the RMSE values for the baseline lengths of three to six meters were within ±1′for yaw, and less than ±10′and ±20′for pitch and roll, respectively, but those of between six to fifteen meters were less than ±1′for yaw, ±5′for pitch, and ±10′for roll.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.2
• /
• pp.201-208
• /
• 2011

With the increase in the number of smartphone users, precise 3D positional information is required by various applications. The positioning accuracy using civilian single-frequency pseudoranges is at the level of 10 m or so, but most applications these days are asking for a sub-meter level Therefore, instead of an absolute positioning technique, the VRS-based differential approach is applied along with the correction of the double-differenced (DD) residual errors using FKP (Flachen-Korrektur-Parameter). The VRS (Virual Reference Station) is located close to the rover, and the measurements are generated by correcting the geometrical distance to those of the master reference station. Since the unmodeled errors are generally proportional to the length of the baselines, the correction parameters are estimated by fitting a plane to the DD pseudorange errors of the CORS network. The DD positioning accuracy using 24 hours of C/A code measurements provides the RMS errors of 37 cm, 28 cm for latitudinal and longitudinal direction, respectively, and 76 cm for height. The accuracy of the horizontal components is within ${\pm}0.5m$ for about 90% of total epochs, and in particular the biases are significantly decreased to the level of 2-3 cm due to the network-based error modeling. Consequently, it is possible to consistently achieve a sub-meter level accuracy from the single-frequency pseudoranges using the VRS and double-differenced error modeling.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.439-452
• /
• 2014

This paper suggests the method to extend service area by using the transmit offset delay in T-DMB single frequency network (SFN). In general, synchronization of the transmit time of all site can be done by using the reference clock of GPS, which dose not reflect the details geographical characteristics and transmit specifications of each site. Applying the site-specific transmit offset delay, we could extend the service area of SFN T-DMB. Applying the transmit offset delay, it is found that the signal quality in the region of weak receive field strength was improved and upto 4~8 km service area expansion was achieved by satisfying the minimum field strength ($45dB{\mu}V/m$) recommended by the Korea Communications Commission (KCC). Site-specific offset delay was calculated considering the geographic service area characteristics, distribution of electric field strength between neighboring sites and site-specific service target area. Experiments were carried out in order to analyze impact of calculated offset delay on the T-DMB SFN and also to confirm that the offset delay extends T-DMB service coverage. The experiment was done in metropolitan T-DMB service areas.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.31-46
• /
• 2012

The most critical technology to implement ubiquitous health care is Ubiquitous Sensor Network (USN) technology which makes use of various sensor technologies, processor integration technology, and wireless network technology-Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN)-to easily gather and monitor actual physical environment information from a remote site. With the feature, the USN technology can make the information technology of the existing virtual space expanded to actual environments. However, although the RFID and the WSN have technical similarities and mutual effects, they have been recognized to be studied separately, and sufficient studies have not been conducted on the technical integration of the RFID and the WSN. Therefore, EPCglobal which realized the issue proposed the EPC Sensor Network to efficiently integrate and interoperate the RFID and WSN technologies based on the international standard EPCglobal network. The proposed EPC Sensor Network technology uses the Complex Event Processing method in the middleware to integrate data occurring through the RFID and the WSN in a single environment and to interoperate the events based on the EPCglobal network. However, as the EPC Sensor Network technology continuously performs its operation even in the case that the minimum conditions are not to be met to find complex events in the middleware, its operation cost rises. Moreover, since the technology is based on the EPCglobal network, it can neither perform its operation only for the sake of sensor data, nor connect or interoperate with each information system in which the most important information in the ubiquitous computing environment is saved. Therefore, to address the problems of the existing system, we proposed the design and implementation of USN integration management system. For this, we first proposed an integration system that manages RFID and WSN data based on Session Initiation Protocol (SIP). Secondly, we defined the minimum conditions of the complex events to detect unnecessary complex events in the middleware, and proposed an algorithm that can extract complex events only when the minimum conditions are to be met. To evaluate the performance of the proposed methods we implemented SIP-based integration management system.