• Title/Summary/Keyword: Single Cell

Search Result 3,845, Processing Time 0.034 seconds

Optimization and Elucidation of Interactions between Ammonium, Nitrate and Phosphate in Centella asiatica Cell Culture Using Response Surface Methodology

  • Omar Rozita;Abdullah M. A.;Hasan M. A.;Marziah M.;Mazlina M.K.Siti
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • v.10 no.3
    • /
    • pp.192-197
    • /
    • 2005
  • The effects of macronutrients $(NO_3^-,\; NH_4^+\;and\;PO_4^{3-})$ on cell growth and triterpenoids production in Centella asiatica cell suspension cultures were analyzed using the Box­Behnken response surface model experimental design. In screening and optimization experiments, $PO_4^{3-}$ as a single factor significantly influenced cell growth where increasing the phosphate level from 0.1 to 2.4 or 2.6 mM, elevated cell growth from 3.9 to $14\~16g/L$. The optimum values predicted from the response surface model are 5.05mM $NH_4^+$, 15.0mM $NO_3^-$ and 2.6mM $PO_4^{3-}$, yielding 16.0g/L cell dry weight with $99\%$ fitness to the experimental data. While the $NH_4^+-NO_3^-$ interaction influenced cell growth positively in the optimization experiment, $NH_4^+$ and $NO_3^-$ as single factors; and interactions of $NO_3^--PO_4^{3-},\;NH_4^+-PO_4^{3-}$ and $NH_4^+-NO_3^-$ were all negative in the screening experiment. Cell growth and the final pH level were positively affected by $PO_4^{3-}$, but negatively affected by $NH_4^+\;and\;NH_4^+-PO_4^{3-}$ interactions. The different effects of factors and their interactions on cell growth and final pH are influenced by a broad or narrow range of macronutrient concentrations. The productions of triterpenoids however were lower than 4mg/g cell dry weight.

LiPB Battery SOC Estimation Using Extended Kalman Filter Improved with Variation of Single Dominant Parameter

  • Windarko, Novie Ayub;Choi, Jae-Ho
    • Journal of Power Electronics
    • /
    • v.12 no.1
    • /
    • pp.40-48
    • /
    • 2012
  • This paper proposes the State-of-charge (SOC) estimator of a LiPB Battery using the Extended Kalman Filter (EKF). EKF can work properly only with an accurate model. Therefore, the high accuracy electrical battery model for EKF state is discussed in this paper, which is focused on high-capacity LiPB batteries. The battery model is extracted from a single cell of LiPB 40Ah, 3.7V. The dynamic behavior of single cell battery is modeled using a bulk capacitance, two series RC networks, and a series resistance. The bulk capacitance voltage represents the Open Circuit Voltage (OCV) of battery and other components represent the transient response of battery voltage. The experimental results show the strong relationship between OCV and SOC without any dependency on the current rates. Therefore, EKF is proposed to work by estimating OCV, and then is converted it to SOC. EKF is tested with the experimental data. To increase the estimation accuracy, EKF is improved with a single dominant varying parameter of bulk capacitance which follows the SOC value. Full region of SOC test is done to verify the effectiveness of EKF algorithm. The test results show the error of estimation can be reduced up to max 5%SOC.

Expression of Cyclin B1 mRNA and Protein after Activation in Enucleated Mouse Oocytes

  • Hwang, Seong-Soo;Kim, Chang-Kun;Chung, Young-Chai
    • Proceedings of the Korean Society of Embryo Transfer Conference
    • /
    • 2002.11a
    • /
    • pp.116-116
    • /
    • 2002
  • Further development of reconstructed embryos may be dependent upon the synchronization of donor nucleus and recipient cytoplasm at cell fusion, To control the synchronization of donor and recipient cells, the enucleated MII arrested oocytes are artificially stimulated prior to embryo reconstruction. Destruction of cyclin B results in the exit of cells from M-phase of cell cycle. This study was designed to investigate the effects of single or combined stimulation affected cyclin B1 mRNA and protein levels in mouse oocytes. The oocyte activation was induced by 7% ethanol or 10$\mu\textrm{g}$/$m\ell$ Ca-ionophore without (single) or with (combined) 10$\mu\textrm{g}$/$m\ell$ cycloheximide. Competitive quantitative PCR for cyclin Bl mRNA and western blot analysis for cyclin B1 protein was preformed in mouse oocytes. Cyclin B1 mRNA level was significantly reduced in single (P<0.05) and combined (P<0.05) stimulation groups. However, this level did not change in non-activated group and increased in intact group. Cyclin B1 protein level was also significantly reduced in both single (P<0.05) and combined (P<0.05) stimulation groups. In conclusion, single and combined stimulation induces the degradation of cyclin B1 mRNA and protein after activation in enucleated mouse oocytes.

  • PDF

Influence of co-culturing muscle satellite cells with preadipocytes on the differentiation of adipocytes and muscle cells isolated from Korean native cattle

  • Choi, Chang Weon
    • Korean Journal of Agricultural Science
    • /
    • v.45 no.4
    • /
    • pp.715-723
    • /
    • 2018
  • The present study was done to investigate the effect of co-culturing muscle satellite cells (MSCs) and intramuscular preadipocytes (IPs) on the differentiation of adipocytes and muscle cells isolated from Korean native cattle. MSCs and IPs were single-cultured in 10% fetal bovine serum/Dulbecco's modified Eagles medium (FBS/DMEM) for 48 h followed by culturing in 5% FBS/DMEM as the growth media. Then, the growth media was replaced by differentiation media composed of 2% FBS/DMEM without any additives for the single- or co-culture of muscle cells and intramuscular adipocytes to induce the differentiation of both cell types. Cell differentiation was measured by morphological investigation and cytosolic enzyme analysis of glycerol-3-phosphate dehydrogenase (GPDH) for the adipocytes and creatine kinase (CK) for the muscle cells. In the morphological test, the presence of muscle cells did not stimulate adipocyte differentiation showing more differentiation of the adipocytes in the single-culture compared to the co-culture condition. However, the differentiation of muscle cells was promoted by adipocytes in the co-culture. The results of the enzymatic analysis were highly associated with the morphological results with a statistically higher GPDH activity (p < 0.05) appearing in the single-culture than in the co-culture, whereas the opposite was true for the CK activity of the muscle cells (p < 0.05). By manipulating in vivo the milieu using a co-culture, we could detect the difference in the rate of cell differentiation and suggest that a co-culture system is a more reliable and precise technique compared to a single-culture. Further studies on various co-culture trials including supplementation of differentiating substances, gene expression analysis, etc. should be done to obtain practical and fundamental data.

Review on Korean Herbal Medicine Complex Prescriptions and Single Herbal Medicines for Osteoporosis - Focused on Domestic Research Published Since 2013 (골다공증의 한방 복합 처방 및 단일 본초에 대한 국내 연구 고찰 - 2013년 이후 발표된 국내 연구를 중심으로)

  • Lee, Jung Min;Kim, Nam Hoon;Lee, Eun-Jung
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.35 no.3
    • /
    • pp.87-96
    • /
    • 2021
  • The purpose of this study was to investigate the effect of single herbal medicines and Korean herbal medicine complex prescriptions for osteoporosis in Korea. We targeted studies published in domestic journals from January 1, 2013 to April 1, 2021. For domestic databases, RISS, NDSL, OASIS, DBpia, KISS, KISTI, and Korean Traditional Knowledge Portal were used. Words such as "osteoporosis", "herbal medicine", "herbal combination prescription" and "herbal" were combined and searched. A total of 32 studies were selected. Among them, 8 studies were conducted exclusively for animal studies, 18 studies were conducted on cell experiments, and 6 studies were conducted on both animal and cell experiments. There were 18 studies using a single herb and 14 studies using a combination of Herbal medicine. As a result of the investigation of a single herb, it was found that 補陽藥 was most widely used, and it was found that it was mainly used in the herbal combination prescription, mainly for 補陽藥, 補氣藥, and 補陰藥. Studies in animal experiments revealed significant results mainly in bone mineral density, serological indicators, and morphological indicators of bone tissue. In the study of cell experiments, the effects were found in factors related to the differentiation of osteoclasts and inhibitors of inflammation. Through the results of this study, we are able to confirm the effective single herbal medicines and herbal medicine complex prescriptions for the treatment of osteoporosis, and it is expected that they will contribute to clinical treatment.

A Review on Membranes and Catalysts for Anion Exchange Membrane Water Electrolysis Single Cells

  • Cho, Min Kyung;Lim, Ahyoun;Lee, So Young;Kim, Hyoung-Juhn;Yoo, Sung Jong;Sung, Yung-Eun;Park, Hyun S.;Jang, Jong Hyun
    • Journal of Electrochemical Science and Technology
    • /
    • v.8 no.3
    • /
    • pp.183-196
    • /
    • 2017
  • The research efforts directed at advancing water electrolysis technology continue to intensify together with the increasing interest in hydrogen as an alternative source of energy to fossil fuels. Among the various water electrolysis systems reported to date, systems employing a solid polymer electrolyte membrane are known to display both improved safety and efficiency as a result of enhanced separation of products: hydrogen and oxygen. Conducting water electrolysis in an alkaline medium lowers the system cost by allowing non-platinum group metals to be used as catalysts for the complex multi-electron transfer reactions involved in water electrolysis, namely the hydrogen and oxygen evolution reactions (HER and OER, respectively). We briefly review the anion exchange membranes (AEMs) and electrocatalysts developed and applied thus far in alkaline AEM water electrolysis (AEMWE) devices. Testing the developed components in AEMWE cells is a key step in maximizing the device performance since cell performance depends strongly on the structure of the electrodes containing the HER and OER catalysts and the polymer membrane under specific cell operating conditions. In this review, we discuss the properties of reported AEMs that have been used to fabricate membrane-electrode assemblies for AEMWE cells, including membranes based on polysulfone, poly(2,6-dimethyl-p-phylene) oxide, polybenzimidazole, and inorganic composite materials. The activities and stabilities of tertiary metal oxides, metal carbon composites, and ultra-low Pt-loading electrodes toward OER and HER in AEMWE cells are also described.

Single Particle Irradiation System to Cell (SPICE) at NIRS

  • Yamaguchi, Hiroshi;Ssto, Yukio;Imaseki, Hitoshi;Yasuda, Nakahiro;Hamano, Tsuyoshi;Furusawa, Yoshiya;Suzuki, Masao;Ishikawa, Takehiro;Mori, Teiji;Matsumoto, Kenichi;Konishi, Teruaki;Yukawa, Masae;Soga, Fuminori
    • Proceedings of the Korean Society of Medical Physics Conference
    • /
    • 2002.09a
    • /
    • pp.267-268
    • /
    • 2002
  • Microbeam is a new avenue of radiation research especially in radiation biology and radiation protection. Selective irradiation of an ionizing particle to a targeted cell organelle may disclose such mechanisms as signal transaction among cell organelles and cell-to-cell communication in the processes toward an endpoint observed. Bystander effect, existence of which is clearly evidenced by application of the particle microbeam to biological experiments, suggests potential underestimation in the conventional risk estimation at low particle fluence rates, such as environment of space radiations in ISS (International Space Station). To promote these studies we started the construction of our microbeam facility (named as SPICE) to our HVEE Tandem accelerator (3.4 MeV proton and 5.1 MeV $^4$He$\^$2+/). For our primary goal, "irradiation of single particle to cell organelle within a position resolution of 2 micrometer in a reasonable irradiation time", special features are considered. Usage of a triplet Q magnet for focussing the beam to submicron of size is an outstanding feature compared to facilities of other institutes. Followings are other features: precise position control of cell dish holder, design of the cell dish, data acquisition of microscopic image of a cell organelle (cell nucleus) and data processing, a reliable particle detection, soft and hard wares to integrate all these related data, to control and irradiate exactly determined number of particles to a targeted spot.

  • PDF

Electrochemical Catalytic Behavior of Cu2O Catalyst for Oxygen Reduction Reaction in Molten Carbonate Fuel Cells

  • Song, Shin Ae;Kim, Kiyoung;Lim, Sung Nam;Han, Jonghee;Yoon, Sung Pil;Kang, Min-Goo;Jang, Seong-Cheol
    • Journal of Electrochemical Science and Technology
    • /
    • v.9 no.3
    • /
    • pp.195-201
    • /
    • 2018
  • To enhance the performance of cathodes at low temperatures, a Cu-coated cathode is prepared, and its electrochemical performance is examined by testing its use in a single cell. At $620^{\circ}C$ and a current density of $150mAcm^{-2}$, a single cell containing the Cu-coated cathode has a significantly higher voltage (0.87 V) during the initial operation than does that with an uncoated cathode (0.79 V). According to EIS analysis, the high voltage of the cell with the Cu-coated cathode is due to the dramatic decrease in the high-frequency resistance related to electrochemical reactions. From XPS analysis, it is confirmed that the Cu is initially in the form of $Cu_2O$ and is converted into CuO after 150 h of operation, without any change in the state of the Ni or Li. Therefore, the high initial cell voltage is confirmed to be due to $Cu_2O$. Because $Cu_2O$ is catalytically active toward $O_2$ adsorption and dissociation, $Cu_2O$ on a NiO cathode enhances cell performance and reduces cathode polarization. However, the cell with the Cu-coated cathode does not maintain its high voltage because $Cu_2O$ is oxidized to CuO, which demonstrates similar catalytic activity toward $O_2$ as NiO.

Single cell gap polymer-stabilized blue-phase transflective LCDs using internal nanowire grid polarizer

  • Cui, Hong-Qing;Ye, Zhi-Cheng;Hu, Wei;Lin, Xiao Wen;Chung, T.C.;Jen, Tean-Sen;Lu, Yan-Qing
    • Journal of Information Display
    • /
    • v.12 no.3
    • /
    • pp.115-119
    • /
    • 2011
  • Optically isotropic liquid crystal (LC) mixture such as blue-phase LC and nanostructured LC composites exhibit the advantages of fast response time, high contrast ratio and wide-viewing angle due to the induced birefringence along the horizontal electric field. Utilizing this mixture, a novel single cell gap in-plane switching-type polymer-stabilized blue-phase transflective liquid crystal display by embedding the nanowire grid polarizer as a polarization-dependent reflective polarizer in the R region is proposed. This device can be used as a normal black mode without any quarter-wave plate or patterned in-cell phase retarder. Moreover, the transmittance is identical to the reflectance so that it will be suitable for single gamma driving. Detailed electro-optic performances, such as voltage-dependent light efficiency and viewing angle of the proposed device configuration, are investigated.

A Study on Manufacture and Design of Low Voltage.Low Electric Power System by PEMFC Single cell (PEMFC 단위 셀의 제작 및 저전압.저전력 시스템 설계에 관한 연구)

  • Ryu, Yun-Sim;Ahn, Ho-Gyun;Seo, Jung-Rang;Kim, Sung-Hoon;Lee, Chang-Ho
    • Proceedings of the KIPE Conference
    • /
    • 2007.11a
    • /
    • pp.193-195
    • /
    • 2007
  • These days, to change the new & renewable energy change the subject because environmental pollution and exhausted fossil power. The most notable Fuel cells by one of the new & renewable energies are one of very useful power conversion sources. Their advantages are low environmental pollution, highly efficient power generation, diversity of fuels (natural gas, LPG, methanol and naphtha), and reusability of exhaust heat, modularity, and faster installation. PEMFC by one of the Fuel Cells is the energy of new technology which is produced by the electric chemical reaction directly. The essential composition elements of PEMFC stack are membrane electrode assembly (MEA), catalyst, Bipolar Plate. Under the this study, know-how is manufacturing single cell of PEMFC and Study design of Low Voltage, Low Electric Power System by PEMFC Single Cell.

  • PDF