• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1092-1099
• /
• 2022

Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1287-1293
• /
• 2008

In this study, a blend of 2-amino-2-methyl-1-propanol (AMP) and ammonia (NH$_3$) was used to achieve high absorption rates for carbon dioxide (CO$_2$) as suggested at several literatures. The absorption rates of aqueous AMP and blended AMP+NH$_3$ solutions with CO$_2$ and nitrogen dioxide (NO$_2$) were measured using a stirred-cell reactor at 303 K. The effect of the added NH$_3$ to enhance absorption characteristics of AMP was studied. The performances were evaluated under various operating conditions. The absorption rates increased following the increase of the concentration of NH$_3$. The absorption rate of NH$_3$ blended into 30 wt.% AMP solution with NO$_2$ at 303 K was 12.6$\sim$32.6% higher than that of aqueous AMP solution without NH3. Also, the addition of 3 wt.% NH$_3$ to 30 wt.% AMP increased 48.2$\sim$41.6% values for the reactions with CO$_2$ and NO$_2$ at 303 K. Therefore, it clearly shows that the reaction rate of AMP with CO$_2$ and NO$_2$ can be increased by the addition of NH$_3$.

• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.369-377
• /
• 1982

The technique of combined-measurement of reflectance and ellipsometric parameters was used for studying the anodic film formed on nickel surface in basic solutions. An ellipsometer was automated for transient measurements by way of modulating the plane-polarized light with the Faraday effect. Surface film was formed electrochemically by applying a potential step from the reduction potential range to the passivation range on a polished, high-purity, polycrystalline nickel specimen. From that instant, the changes in the reflectance(r) and the ellipsometric parameters(${\Delta},{\Psi}$) of the surface film were recorded by the automatic ellipsometer. Three exact simultaneous equations including these optical signals, ${\Delta},{\Psi}$ and r were solved numerically with a computer in order to determine the optical properties, n, k, and the thickness, ${\tau}$, of the surface film. From the computed results which showed dependence on pH and time, it was found that passivation of nickel can be effectively attained by surface film thinner than $15{\AA}$ and this passivation film has a small optical absorption coefficient. It seemed that a high pH environment enhances the rate of passivation and is favorable for a denser structure of the surface film. The experimental evidence is in accordance with the hypothesis that the composition of the passive film can be approximated by $Ni(OH)_2$ in the early stage of passivation and that as time passes the composition changes partially toward that of NiO through dehydration.

• International Commerce and Information Review
• /
• v.17 no.3
• /
• pp.379-402
• /
• 2015

The purpose of this study is to determine whether there is a significant difference in impacts decomposed into scale effects and technique effects on $CO_2$ emissions between Greenfield FDI and M&A FDI flows into Korean manufacturing sectors, ultimately leading to clarify the relationship between FDI and environmental pollution. To this end, the research constructed a simultaneous model to analyze coincidental relationship of influence and interactions between each variable. Archival data, spanning the 15 years period from 1995 to 2009, is industry-level panel data on 13 Korean manufacturing sectors, and it is empirically analyzed with three-stage least squares (3SLS) method. Key findings can be summarized into two parts. First of all, Greenfield FDI has a greater impact on increasing industrial gross output, resulting in more $CO_2$ emissions than M&A FDI through scale effects. Secondly, technique effects of FDI have a bigger impact on $CO_2$ emissions than scale effects, implying that this inflow of FDI into Korea contributes positively to the reduction of $CO_2$ emissions. These findings are expected to play a meaningful role in establishing FDI policies with consideration of the environment by giving the implication that different incentives for each FDI type should be considered to maximize the effect of environmental protection.

• Tuberculosis and Respiratory Diseases
• /
• v.79 no.4
• /
• pp.282-288
• /
• 2016

Background: Tuberculosis (TB) is a major health problem, and accurate and rapid diagnosis of multidrug-resistant (MDR) and extended drug-resistant (XDR) TB is important for appropriate treatment. In this study, performances of solid and liquid culture methods were compared with respect to MDR- and XDR-TB isolate recovery and drug susceptibility testing. Methods: Sputum specimens from 304 patients were stained with Ziehl-Neelsen method. Mycobacterium tuberculosis (Mtb) isolates were tested for recovery on $L{\ddot{o}wenstein$-Jensen (LJ) medium and the BacT Alert 3D system. For drug susceptibility testing of Mtb, isolates were evaluated on M-KIT plates and the BacT Alert 3D system. Results: The recovery rates were 94.9% (206/217) and 98.2% (213/217) for LJ medium and the BacT Alert 3D system, respectively (kappa coefficient, 0.884). The rate of drug resistance was 13.4% for at least one or more drugs, 6.0% for MDR-TB and 2.3% for XDR-TB. M-KIT plate and BacT 3D Alert 3D system were comparable in drug susceptibility testing for isoniazid (97.7%; kappa coefficient, 0.905) and rifampin (98.6%; kappa coefficient, 0.907). Antibiotic resistance was observed using M-KIT plates for 24 of the total 29 Mtb isolates (82.8%). Conclusion: The liquid culture system showed greater reduction in the culture period, as compared with LJ medium; however, drug susceptibility testing using M-KIT plates was advantageous for simultaneous testing against multiple drug targets.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.88-94
• /
• 2012

One of the effective ways to reduce both $NO_x$ and PM at the same time in a diesel CI engine is to operate the engine in low temperature combustion (LTC) regimes. In general, two strategies are used to realize the LTC operation-dilution controlled LTC and late injection LTC - and in this study, the former approach was used. In the dilution controlled regime, LTC is achieved by supplying a large amount of EGR to the cylinder. The significant EGR gas increases the heat capacity of in-cylinder charge mixture while decreasing oxygen concentration of the charge, activating low temperature oxidation reaction and lowering PM and $NO_x$ emissions. However, use of high EGR levels also deteriorates combustion efficiency and engine power output. Therefore, it is widely considered to use increased intake pressure as a way to resolve this issue. In this study, the effects of intake pressure variations on performance and emission characteristics of a single cylinder diesel engine operated in LTC regimes were examined. LTC operation was achieved in less than 8% $O_2$ concentration and thus a simultaneous reduction of both PM and $NO_x$ emission was confirmed. As intake pressure increased, combustion efficiency was improved so that THC and CO emissions were decreased. A shift of the peak Soot location was also observed to lower $O_2$ concentration while $NO_x$ levels were kept nearly zero. In addition, an elevation of intake pressure enhanced engine power output as well as indicated thermal efficiency in LTC regimes. All these results suggested that LTC operation range can be extended and emissions can be further reduced by adjusting intake pressure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.129-137
• /
• 2014

In this study, the characteristics of exhaust gas as a function of the biodiesel mixing ratio were investigated. Diesel and waste oil were used for preparing mixed fuel, and the ratios of the mixed fuel were varied in the BD3~BD100 range. The injection pressures(${\Delta}p_{inj}$) was considered as an experimental variable and was set to 400 bar, 600 bar, 800 bar, 1000 bar, and 1200 bar. Furthermore, for quantitatively analyzing the characteristics of exhaust gas(NOx and Soot), the concepts of Pearson correlation coefficient and Spearman rank-order correlation coefficient based on statistics were introduced. Consequently, it was found that the correlation of the emission of NOx and Soot is linear, and the Pearson and Spearman coefficients are -0.732 and -0.724, respectively, under all analysis conditions. Especially, for the injection pressure of 800 bar, a simultaneous reduction in NOx and Soot emission is possible by controlling the biodiesel mixing ratio. This is because the correlation coefficients of NOx and Soot emissions were nearly 0, as the Pearson correlation coefficient was -0.089.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.330-333
• /
• 2009

Alveolar bone resorption after extraction impairs the necessary bone volume and complicates the case for implant surgery and aesthetic implant prosthesis. Immediate implant surgery after extraction decreases the number of surgical procedures and the duration of treatment, while allowing minimum alveolar bone resorption and preserving the residual bone volume. Although immediate implant holds many advantages such as preservation of hard and soft tissue around the extraction socket, greater implant survival rate and higher patient satisfaction, various complications and high failure rate are discouraging factors for the clinicians. In this case report, severe alveolar bone resorption with soft tissue changes were predicted after the extraction of prolonged retained deciduous incisors and impacted maxillary canines and thus decided on immediate implant procedure. Immediate implant surgery after extraction was carried out with minimal bone reduction and tapered wide-neck implant to establish initial stability. Simultaneous bone graft was done by filling the defect area with iliac cancellous bone with additional onlay-type bone graft and absorbable membrane on the labial bone for upper lip support. A stable and esthetic result was obtained with shortened treatment period.

• Korean Journal of Acupuncture
• /
• v.30 no.4
• /
• pp.298-304
• /
• 2013

Objectives : We examined mutual inhibitory effects of combined acupoints in arthritic pain induce by carrageenan(CA). Electroacupuncture(EA) is considered a potentially useful treatment for arthritis. Although the analgesic effect of acupuncture is well documented, little is understood about its biological basis. There are many previous studies of positive effect of combined acupoint, this study was conducted to see the mutual inhibitory effects produced by combined acupoint(ST36 and PC7) on arthritic rats. Methods : For the induction of inflammatory pain rat model, CA was injected into the knee joint cavity. There are four groups; EA was applied to bilateral PC7 acupoints(PC7 group), ST36 acupoints(ST36 group), and both PC7 and ST36 acupoints(ST36+PC7 group) except for the control group. The pain level were assessed to determine the change in weight bearing force. We also examined the COX-2 expression in dorsal horn using immunohistochemistry and western blot analysis. Results : The ST36+PC7 group data showed the significant reduction of weight bearing force and the induction of COX-2 protein expression compared with the ST36 group. Conclusions : Simultaneous EA applied to the ST36 and PC7 acupoints reduced the analgesic effect of the ST36 group on knee inflammatory pain.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.651-661
• /
• 2008

This paper proposes a novel contrast enhancement (CE) algorithm for color images using the modified error diffusion (ED). After conventional color histogram equalization (HE), artifacts such as false contours are produced in the contrast enhanced image. The proposed CE algorithm using the modified ED consists of two parts: CE and ED. In the first part, a low-contrast input image is enhanced by the conventional HE method. In the second part, we use the modified ED algorithm. The inputs of the second part are the average and scaled difference images of the original color input image and the HE image, in which the scaled color difference image is diffused by the ED algorithm. In the proposed algorithm, the modified ED algorithm reduces the artifacts produced in the HE image, and increases the number of color levels. Computer simulations with a number of low-contrast color images show the effectiveness of the proposed CE method in terms of the visual quality as well as the probability mass function. It can be used as a post-processing for CE with simultaneous artifact reduction in various display devices.