• Advances in nano research
• /
• v.16 no.2
• /
• pp.111-125
• /
• 2024

Recently, a lot of research has been done on the analysis of axial vibrations of homogeneous and FG nanotubes (nanorods) with various aspects of vibrations that have been fully mentioned in history. However, there is a lack of investigation of the dynamic internal resonances of FG nanotubes (nanorods) between them. This is one of the essential or substantial characteristics of nonlinear vibration systems that have many applications in various fields of engineering (making actuators, sensors, etc.) and medicine (improving the course of diseases such as cancers, etc.). For this reason, in this study, for the first time, the dynamic internal resonances of FG nanorods in the simultaneous presence of large-amplitude size dependent behaviour, inertial and shear effects are investigated for general state in detail. Such theoretical patterns permit as to carry out various numerical experiments, which is the key point in the expansion of advanced nano-devices in different sciences. This research presents an AFG novel nano resonator model based on the axial vibration of the elastic nanorod system in terms of derivation from large-amplitude size dependent internal modals interactions. The Hamilton's Principle is applied to achieve the basic equations in movement and boundary conditions, and a harmonic deferential quadrature method, and a multiple scale solution technique are employed to determine a semi-analytical solution. The interest of the current solution is seen in its specific procedure that useful for deriving general relationships of internal resonances of FG nanorods. The numerical results predicted by the presented formulation are compared with results already published in the literature to indicate the precision and efficiency of the used theory and method. The influences of gradient index, aspect ratio of FG nanorod, mode number, nonlinear effects, and nonlocal effects variations on the mechanical behavior of FG nanorods are examined and discussed in detail. Also, the inertial and shear traces on the formations of internal resonances of FG nanorods are studied, simultaneously. The obtained valid results of this research can be useful and practical as input data of experimental works and construction of devices related to axial vibrations of FG nanorods.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.1
• /
• pp.21-32
• /
• 2024

This study performed the seismic response analysis of an LNG storage tank supported by a disconnected piled raft foundation (DPRF) with a load transfer platform (LTP). For this purpose, a precise analytical model with simultaneous consideration of Fluid-Structure Interaction (FSI) and Soil-Structure Interaction (SSI) was used. The effect of the LTP characteristics (thickness, stiffness) of the DPRF system on the seismic response of the superstructure (inner and outer tanks) and piles was analyzed. The analytical results were compared with the response of the piled raft foundation (PRF) system. The following conclusions can be drawn from the numerical results: (1) The DPRF system has a smaller bending moment and axial force at the head of the pile than the PRF system, even if the thickness and stiffness of the LTP change; (2) The DPRF system has a slight stiffness of the LTP and the superstructure member force can increase with increasing thickness. This is because as the stiffness of the LTP decreases and the thickness increases, the natural frequency of the LTP becomes closer to the natural frequency of the superstructure, which may affect the response of the superstructure. Therefore, when applying the DPRF system, it is recommended that the sensitivity analysis of the seismic response to the thickness and stiffness of the LTP must be performed.

• Geomechanics and Engineering
• /
• v.36 no.3
• /
• pp.217-229
• /
• 2024

Determining lateral earth pressure coefficient (EPC) K is a classic problem in geotechnical engineering. It is a key parameter for estimating the stresses in backfilled openings. For backfilled openings with rigid and immobile walls, some suggested using the Jaky's at-rest earth pressure coefficient K₀ while other suggested taking the Rankine's active earth pressure coefficient K_a. A single value was proposed for the entire backfilled opening. To better understand the distributions of stresses and K in a backfilled opening, a series of laboratory tests have been conducted. The horizontal and vertical normal stresses at the center and near the wall of the opening were measured. The values of K at the center and near the wall were then calculated with the measured horizontal and vertical normal stresses. The results show that the values of K are close to K_a at the center and close to K₀ near the wall. Furthermore, the experimental results show that the horizontal stress is almost the same at the center and near the wall, indicating a uniform distribution from the center to the wall. It can be estimated by analytical solutions using either K_a or K₀. The vertical stress is higher near the center than near the wall. Its analytical estimation can only be done by using K_a at the center and K₀ near the wall. Finally, the test results were used to calibrate a numerical model of FLAC2D, which was then used to analyze the influence of column size on the stresses and K in the backfilled opening.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2756-2766
• /
• 2024

Small rod-controlled pressurized water reactors (PWR) are the ideal energy source for vessel propulsion, benefiting from their high reactivity control efficiency. Since the control rods (CRs) increase the complexity of reactivity control, this paper seeks to study the performance of CRs in small rod-controlled PWRs to extend the lifetime and reduce power offset due to CRs. This study investigates CR grouping, move-in/out strategies, and axially non-uniform design effects on core neutron physics metrics. These metrics include axial offset (AO), core lifetime (CL), fuel utilization (FU), and radial power peaking factor (R-PPF). To simulate the movement of the CRs, a "Critical-CR-burnup" function was developed in OpenMC. In CR designs, the CRs are grouped into three banks to study the simultaneous and prioritized move-in/out strategies. The results show CL extension from 590 effective full power days (EFPDs) to 638-698 EFPDs. A lower-worth prioritized strategy minimizes AO and the extremum values decrease from -0.69 and + 0.81 to -0.28 and + 0.51. Although an axially non-uniform CR design can improve AO at the beginning of cycle (BOC), considering the overall CR worth change is crucial, as a significant decrease can adversely impact axial power distribution during the middle of cycle (MOC).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.29-36
• /
• 2004

This study deals with an analysis on the sinking resistance for the model purse seine, in the case of different netting material and sinkers. The experiment was carried out using rune simplified model seines of knotless nettings. Dimension of model seines 420cm for corkline and 85cm for seine depth, three groups of models rigged 25, 45 and 60g with the same weighted sinkers in water were used. These were named PP-25, PA-25, PES-25, PP-45, PA-45, PES-45, PP-60, PA-60 and PES-60 seine. The densitie($\rho$) of netting materials were 0.91g/cm$cm^3$, 1.14g/cm$cm^3$ and 1.38g/cm$m^3$. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. Differential equations were derived from the conservation of momenta of the model purse seines and used to determine the sinking speeds of the depths of leadline and the other portions of the seines. An analysis carried out by simultaneous differential equations for numerical method by sub-routine Runge-Kutta-Gill The results obtained were as follows : 1. Average sinking speed of leadline for the model seines rigged 60g with the same weighted sinkers in water was fastest for 12.2cm/sec of PES seine, followed by 11.4cm/sec of PA and 10.7cm/sec of PP seines. 2. The coefficient of resistance for netting of seine was estimated to be $K_D=0.09(\frac{\rho}{\rho_w})^4$ 3. The coefficient of resistance for netting bundle of seine was estimated to be $C_R=0.91(\frac{\rho}{\rho_w})$ 4. In all seines, the calculated depths of leadline closely agreed with the measured ones, each 25g, 45g, 60g of weighted sinkers were put into formulas meas.=1.04cal., meas.=0.99cal. and meas.=0.98 cal.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.122-139
• /
• 2015

Though the digital transition of terrestrial TV has been completed, the transmission system for terrestrial radio has not been determined and terrestrial radio still keeps its analog transmission. This study, under coorientation model, aims to explore the cognitive difference in recognizing important factors to be considered in deciding the digital radio transmission system between the employees of terrestrial broadcasters and then crucial issues related to the factors are driven. It has been found that the most big cognitive difference among the employees of three major terrestrial broadcasters lies in selecting frequency band for digital radio transmission. But there was little difference of opinion on simultaneous production-transmission, efficiency of frequency usage, broadcast quality and standards of service. The most disputable point in transition to digital radio broadcasting is selecting the frequency band for digital radio between the frequency bands used for FM radio broadcast (88-108MHz), terrestrial DMB (VHF Ch7~13) and FM radio adjacent broadcast band (76~88MHz: VHF Ch5~6). So, the question concludes into the selection issue between DAB+, HD-Radio, and DRM+. To improve the quality of radio broadcasting service and enhance the satisfaction of listeners, it is desirable to allow to operate both production system and transmission station, to enhance high transmission efficiency with minimum transmission facility, and to permit new entrance of broadcasters.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.655-663
• /
• 2016

Increasing green house gas and it consequent climate change problems are discussed as a global issue. Accordingly, future local green house gas emission will increase up to 40% of the entire local green house gas emission and therefore, efforts to reduce the emission in construction industry is urgently required. Therefore, in this study, heating energy demand was analyzed by using the EnergyPlus simulation according to wood material finishes configuration. EnergyPlus has the entry for a variety of buildings and heating, ventilation, air conditioning (HAVC) system components, in particular buildings, air conditioning systems, and performs simultaneous integrated calculated through the feedback between the heat source unit, a verification program according to the ASHRAE Standard 140-2007 to be. The climate data for the simulation we used the data IWEC in Incheon and Gwangju provided by EnergyPlus. The analysis of simulation model was farm and fishing house standard design drawings: 2012, presented at the Korea Rural Community Corporation. The results of simulation of central region and southern region were effected by wood products of simulation model into the interior finish, exterior finish, windows, wooden structure. Also, it was confirmed that the reduced heating energy demand.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.32-43
• /
• 2014

To identify major causes of the global environment changes arising from extreme and unusual weather patterns occurring these days, and to foresee future environmental changes, it is highly important to shed light on the correlation between climate changes and global environment system. To investigate the correlation between climate changes and global environment system, it calls for establishing an integrated climate-environment DB for analyzing comparatively the data on climatic changes and global environment system. In the preceding studies, we researched an XML-based integrated climate-environment DB and developed a management system for the DB. However, the existing integrated climate-environment DB, designed and installed only for individual PCs, does not allow multiple users 'simultaneous access. Accordingly, it fails to systematically update and sharing data which is being generated continuingly. Hence, this study aims to develop an easy-to-use GIS-based integrated DB management system by improving the existing integrated climate-environment DB through the adoption of the client/server model. For this, this study collected and analyzed climate and environment data prior to designing and building a DBMS-based integrated DB. In addition, in order for multidisciplinary researchers to easily get access and apply the integrated DB, this study designed and developed a GIS-based integrated DB management system using a client/server model which facilitates connections with multiple PCs. The GIS-based integrated climate-environment DB management system makes it easier to efficiently manage and locate scattered climate-environment data. It is also expected that the DB system will bring the effects in saving time and cost by avoiding the overlapping generation of data in the areas of integrated climate-environment research.

• Korean Journal of Environmental Agriculture
• /
• v.4 no.1
• /
• pp.31-36
• /
• 1985

In order to choose a suitable soil extractant for the prediction model of heavy metal content in brown rice, four extractants-0.1 M HCl, 0.1 M $HNO_3$, 0.1 M $NH_4$-oxalate and 0.001 M 2Na-EDTA, were compared by analyzing 84 soil and 45 brown rice samples collected from paddy fields adj-acent to five old zinc-mining sites. Content of cadmium and zinc in brown rice had the highest correlation coefficient to 0.001 M 2Na-EDTA and 0.1 M HCl extractants, respectively. However, the lead content in brown rice was significantly correlated with only 0.1 M $NH_4$oxalate solution. For the simultaneous prediction of zinc, cadmium and lead in brown rice, 0.1 M $NH_4$-oxalate solution was the most effective. On the multiple analysis by using various chemical characteristics of soils, pH and calcium content of soils were effective variables for the estimation of cadmium content in brown rice, while CEC and magnesium content were more effective for the estimation of zinc content in brown rice. Furthermore, for the estimation of lead content in brown rice, factors such as pH, CEC, calcium, magnesium, potassium and organic matter content were important variables in the multiple regression equation.

• The Korean Journal of Pharmacology
• /
• v.27 no.2
• /
• pp.191-196
• /
• 1991

The present study was performed to determine whether estradiol, via cAMP mediation, induces prostaglandin synthesis by modulating phospholipase $A_2$ activity which hydrolyzes phospholipids into arachidonic acids, a precursor for prostaglandin synthesis, during the implantation process in rats. Uterine phospholipase $A_2$ activity was elevated on day 5 of pregnancy when implantation normally occurs in rats. Moreover, phospholipase $A_2$ activity was higher in the implant sites than in the non-implant sites of uterus on day 6. In delayed implantation model, phospholipase $A_2$ activity was increased at 12 hrs after estradiol administration and at 8 hrs after dbcAMP administration. In addition, higher activity of phospholipase $A_2$ was induced by the treatment of estradiol plus theophylline, compared with estradiol-only treated group. The simultaneous treatment of indomethacin with estradiol or dbcAMP did not alter phospholipase $A_2$ activity compared with estradiol or dbcAMP-only treated group although significant suppression was observed in uterine PGE and $PGF_{2{\alpha}}$ concentrations. These results suggest that estradiol or cAMP stimulates uterine phospholipase $A_2$ activity, thereby increasing prostaglandin synthesis during the implantation process in rats.