• Advances in Computational Design
• /
• v.2 no.4
• /
• pp.313-331
• /
• 2017

In this study, teaching-learning based optimization (TLBO) is improved by incorporating model of multiple teachers, adaptive teaching factor, self-motivated learning, and learning through tutorial. Modified TLBO (MTLBO) is applied for simultaneous topology, shape, and size optimization of space and planar trusses to study its effectiveness. All the benchmark problems are subjected to stress, displacement, and kinematic stability constraints while design variables are discrete and continuous. Analyses of unacceptable and singular topologies are prohibited by seeing element connectivity through Grubler's criterion and the positive definiteness. Performance of MTLBO is compared to TLBO and state-of-the-art algorithms available in literature, such as a genetic algorithm (GA), improved GA, force method and GA, ant colony optimization, adaptive multi-population differential evolution, a firefly algorithm, group search optimization (GSO), improved GSO, and intelligent garbage can decision-making model evolution algorithm. It is observed that MTLBO has performed better or found nearly the same optimum solutions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.2
• /
• pp.240-253
• /
• 1996

The refrigeration cycle of automobile air-conditioners is simulated in an effort to provide a computational tool for optimum thermodynamic design. In the simulation, thermodynamic and heat transfer analysis was performed for the four major components : evaporator, condenser, compressor, and expansion valve. Effectiveness-NTU method was used for modeling both evaporator and condenser. The evaporator was divied into many subgrids and simultaneous cooling and dehumidifying analysis was performed for each grid to predict the performance accurately. Blance equations were used to model the compressor instead of using the compressor map. The performance of each component was checked against the measured data with CFC-12. Then, all the components were combined to yield the total system performance. Predicted cycle points were compared against the measured data with HFC-134a and the deviation was found to be less than 5% for all data. Finally, the system model was used to predict the performance of CFC-12 and HFC-134a for comparison. The results were very reasonable as compared to the trend deduced from the measured data.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.159-174
• /
• 2003

'Fantasy', the central notion of this essay, is discussed here more as a new paradigm in order to describe the structure of a work of art than as a stylistic characteristic proper to a specific genre of art. It means the whole situation and experience produced by two connected terms 'corporeal subject - screen'. Roland Barthes explained the 'semiographic painting' by Andre Masson as a field in which happens a certain connexion between the impulse of subject and the image, which views the painting not as a physical object but as a 'cinematic screen' ; painting may be redefined as a dream or a fantasy of the corporeal subject. And such an idea of 'art as fantasy' is closely related to the recent theoretical attempts consisting in abolishing the vision-centered conception of art since Renaissance. In this essay, the notion of fantasy as an aesthetic model is sketched by means of the Freud's notes on the fantasy 'A child is being beaten' and Lyotard's more advanced analyse on its attributes and operations. In Lyotard's analysis, fantasy is defined as a 'bloc' or a 'matrix-figure' featuring simultaneous conversion between the active and the passive, sadism and masochism, and coexistence of imcompossible meanings. In this sense, fantasy may be given to us as an analogical model from which we can outline the aesthetic characteristics of electronic media art involving virtual reality and interactivity.

• Journal of The Korean Astronomical Society
• /
• v.38 no.4
• /
• pp.445-462
• /
• 2005

In a companion paper, we have presented so-called Spatio-Spectral Maximum Entropy Method (SSMEM) particularly designed for Fourier-Transform imaging over a wide spectral range. The SSMEM allows simultaneous acquisition of both spectral and spatial information and we consider it most suitable for imaging spectroscopy of solar microwave emission. In this paper, we run the SSMEM for a realistic model of solar microwave radiation and a model array resembling the Owens Valley Solar Array in order to identify and resolve possible issues in the application of the SSMEM to solar microwave imaging spectroscopy. We mainly concern ourselves with issues as to how the frequency dependent noise in the data and frequency-dependent variations of source size and background flux will affect the result of imaging spectroscopy under the SSMEM. We also test the capability of the SSMEM against other conventional techniques, CLEAN and MEM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2647-2655
• /
• 2002

This research presents an analytical model to investigate the stability due to the ball bearing waviness i n a rotating system supported by two ball bearings. The stiffness of a ball bearing changes periodically due to the waviness in the rolling elements as the rotor rotates, and it can be calculated by differentiating the nonlinear contact forces. The linearized equations of motion can be represented as a parametrically excited system in the form of Mathieu's equation, because the stiffness coefficients have time -varying components due to the waviness. Their solution can be assumed as a Fourier series expansion so that the equations of motion can be rewritten as the simultaneous algebraic equations with respect to the Fourier coefficients. Then, stability can be determined by solving the Hill's infinite determinant of these algebraic equations. The validity of this research is proved by comparing the stability chart with the time responses of the vibration model suggested by prior researches. This research shows that the waviness in the rolling elements of a ball bearing generates the time-varying component of the stiffness coefficient, whose frequency is called the frequency of the parametric excitation. It also shows that the instability takes place from the positions in which the ratio of the natural frequency to the frequency of the parametric excitation corresponds to i/2 (i=1,2,3..).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.261-266
• /
• 2006

In this study, a scaled model chamber was built to investigate ventilation characteristics of the hood room in LNG carrier. Experimental study was performed in model by visualization equipment with laser apparatus. Four different kinds of measuring area were selected as experimental condition Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system and its software adopting two-frame grey-level cross correlation algorithm. The flow pattern reveals the large scale counter-clockwise forced-vortex rotation at center area.

• Earthquakes and Structures
• /
• v.7 no.4
• /
• pp.463-484
• /
• 2014

Solid piers with a rounded rectangular cross-section are widely used in railway bridges for high-speed trains in China. Compared to highway bridge piers, these railway bridge piers have a larger crosssection and less steel reinforcement. Existing material models cannot accurately predict the seismic behavior of this kind of railway bridge piers. This is because only a few parameters, such as axial load, longitudinal and transverse reinforcement, are taken into account. To enable a better understanding of the seismic behavior of this type of bridge pier, a simultaneous influence of the various parameters, i.e. ratio of height to thickness, axial load to concrete compressive strength ratio and longitudinal to transverse reinforcements, on the failure characteristics, hysteresis, skeleton curves, and displacement ductility were investigated. In total, nine model piers were tested under cyclic loading. The hysteretic response obtained from the experiments is compared with that obtained from numerical studies using existing material models. The experimental data shows that the hysteresis curves have significantly pinched characteristics that are associated with small longitudinal reinforcement ratios. The displacement ductility reduces with an increase in ratio of axial load to concrete compressive strength and longitudinal reinforcement ratio. The experimental results are largely in agreement with the numerical results obtained using Chang-Mander concrete model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.7
• /
• pp.1015-1018
• /
• 1999

Single trait mixed models have been dominantly utilized for genetic evaluation of the reproductive traits in swine. However employing multiple trait approach may lead to more accurate genetic evaluations. For 5 litter size and litter weight traits of Danish Landrace, genetic parameters were estimated with a multiple trait mixed model. The heritability estimates were 0.02, 0.03, 0.03, 0.05, and 0.07, respectively for litter size at birth, litter size born alive, litter weight at birth, litter size at weaning, and litter weight at weaning. Negative genetic correlations were all positive. The litter weight at birth showed genetic antagonism with litter size born alive (-0.65) and litter size at weaning (-0.31), but positive with litter size at birth (0.47) and litter weight at weaning (0.31). The estimates of environmental correlations were larger than their corresponding genetic correlation estimates except for those between litter weight at birth and the other four traits. This study recommends simultaneous selection for two or more traits with multivariate mixed models in order to improve overall economic response.

• Journal of Korean Elementary Science Education
• /
• v.19 no.1
• /
• pp.101-112
• /
• 2000

The purpose of this study was to develop the modular multimedia instructional materials emphasizing the particulate nature on the realm of matter in elementary science classes. Features of the material are as follows: 1 To be in focus on particulate model named 'phenomenal magnifying glasses' in order to change the student's belief system of continuous matter into the belief system of particulate matter . The 'phenomenal magnifying glasses' is a new instructional strategy designed to change into the view of particulate matter through facilitating the reflective thinking resulted from the simultaneous consideration of experimental phenomena(macroscopic world) and particulate model(microscopic world). 2. To introduce modular system into the instructional materials, which was consisted of 14 subunits according to the sequential instruction unit of 'molecule and molecular motion'. Each subunit was composed of 5 types of modules(module 1: motivation, module 2: experimental result, module 3: discussion, module 4: phenomenal magnifying glasses, module 5: related experiment) 3. The multimedia program was composed of 36 kinds of experimental animation and 59 kinds of computer animation materials combined with text resources, photographic materials and sounds.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.23-30
• /
• 2001

Among the various welding conditions, the welding current that is inversely proportional to the tip-to-work-piece distance is an essential parameter as to monitor the GMAW process and to implement the welding automation. Considering the weld pool surface geometry including weld defects, it should modify the signal processing method for automatic seam tracking in horizontal fillet welding. To meet the above necessities, a mathematical model related with the weld pool geometry was proposed as in a conjunction with the two-dimensional heat flow analysis of the horizontal fillet welding. The signal processing method based on the artificial neural network (Adaptive Resonance Theory) was proposed for discriminating the sound weld pool surface from that with the weld defects. The reliability of the numerical model and the signal processing method proposed were evaluated through the experiments of which showed that they are effective for predicting the weld bead shape with or without the weld defects in a horizontal fillet welding.