• Journal of Korean Association for Spatial Structures
• /
• v.17 no.1
• /
• pp.77-84
• /
• 2017

Vortex-induced vibration and instability vibration of tall buildings are very important fluid-structure interaction phenomenon, and many fundamental questions concerning the influence of body movement on the unsteady aerodynamic force remain unanswered. For tall buildings, there are two experimental methods to investigate the characteristics of unsteady aerodynamic forces, one is forced vibration method and the other is free vibration method. In the present paper, a free vibration method was used to investigate the unsteady aerodynamic force on tall building whose aspect ratio is 9 under boundary layer simulating city area. Wind pressures on surfaces and tip displacements were measured simultaneously, and the characteristics of tip displacements and generalized forces were discussed. It was found that variation of across-wind displacements showed different trend between the case when wind speed increases and wind speed decreases, and the fluctuating generalize forces in across-wind direction of vibrating model are larger than that of static model near the resonant wind speed and approach to the static value. And for higher wind speed range, there were two peaks in across-wind power spectra of generalize forces of vibrating model, which means that two frequency components are predominant in unsteady aerodynamic forces.

• IE interfaces
• /
• v.19 no.1
• /
• pp.26-33
• /
• 2006

Many Firms consider the application of a cross-docking system to reduce inventory and lead-time. However, most studies mainly concentrate on the design of a cross-docking system. This study presents the method that selects the cross-docking center under the existing logistics network. Describing the operation environment to apply the cross-docking system, the selection criteria of the cross-docking center, and the main constraints of transportation planning under the environment of multi-level logistics network, we define the selection problem of the cross-docking center applied to a logistics field. We also define the simulation model that can analyze variously the cross-docking volume and develop the selection methodology of the cross-docking center. The simulation model presents the algorithm and influence factors of the cross-docking system, the decision criteria of the system, policy parameter, and input data. In addition, this study analyzes the effect of increasing the number of simultaneous receiving and shipping docks, and the efficiency of the overnight transportation and cross-docking by evaluating each scenario after simulating the scenarios with the practical data of the logistics field.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.70-77
• /
• 2006

Stress drops of Brune's single-corner ${\omega}^2$ source model were estimated for the earthquakes (2.0$M3.5{\sim}4.0$ and increase up to $M4.5{\sim}5.0$ above which the level of the stress drop could be assumed to be flat or decrease according to whether the rupture process accompanies buried fault or surface rupturing. The converted data of corner frequency and seismic moment were nicely fitted to the relation of $M_0{\propto}f^3$ but show systematically higher corner frequencies for $M_0>10^15$ Nm. This relationship enables systematic evaluation of a scaling relation between magnitude and stress drop. The inverted level of the stress drop is comparable to the recent studies conducted domestic and abroad. A result of lower stress drop estimated by Jun(1991) is supposed to be due to the use of low frequency spectra and existence of two-comer source model around the Korean Peninsula.

• Advances in Energy Research
• /
• v.7 no.2
• /
• pp.85-100
• /
• 2020

Distributed energy resources (DERs) are essential for coping with growing multiple energy demands. A microgrid (MG) is a small-scale version of the power system which makes possible the integration of DERs as well as achieving maximum demand-side management utilization. Hence, this study focuses on the analysis of optimal power dispatch considering economic aspects in a multi-carrier microgrid (MCMG) with price-responsive loads. This paper proposes a novel time-based demand-side management in order to reshape the load curve, as well as preventing the excessive use of energy in peak hours. In conventional studies, energy consumption is optimized from the perspective of each infrastructure user without considering the interactions. Here, the interaction of energy system infrastructures is considered in the presence of energy storage systems (ESSs), small-scale energy resources (SSERs), and responsive loads. Simulations are performed using GAMS (General Algebraic modeling system) to model MCMG, which are connected to the electricity, natural gas, and district heat networks for supplying multiple energy demands. Results show that the simultaneous operation of various energy carriers, as well as utilization of price-responsive loads, lead to better MCMG performance and decrease operating costs for smart distribution grids. This model is examined on a typical MCMG, and the effectiveness of the proposed model is proven.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.3
• /
• pp.61-81
• /
• 2017

Traditional approaches to surface moisture problems in the context of aeolian research have focused on the initiation of sand movement, developing various models for predicting threshold velocity on a wet surface. They have been unsatisfactory, however, in explaining field observations because they have not incorporated spatiotemporal variability of surface moisture, the interactions between transported sand grains and surface, and the role of aeolian transport in controlling surface moisture. As Nield (2011) showed, a simplified numerical model can be used to investigate this issue. This research aims to explore the feedback structures between aeolian transport and surface moisture using a modified sand slab model. Key modifications are the introduction of simultaneous updating scheme for all the slabs and moisture-assigning procedures with and without aeolian transport. The major findings are as follows. Moist surface conditions suppress sand slab movement, leading to the development of smaller-scale topography. Available sands for aeolian transport are determined by the vertical patterns of moisture content with its variations from groundwater to the surface. Sand patches on a wet surface act as a localized source area. Sand movement drives immediate changes in surface moisture rather than time-lag reponses, mostly when moist conditions are dominant.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2003

The examinations of the operating mechanism of an oscillating capillary tube heat pipe (OCHP) using the visualization method revealed that the working fluid in the OCHP oscillated to the axial direction by the contraction and expansion of vapor plugs. The contraction and expansion were due to the formation and extinction of bubbles in the evaporating and condensing part, respectively The actual physical mechanism, whereby the heat which was transferred in such an OCHP was complex and not well understood. In this study, a theoretical model of the OCHP was developed to model the oscillating motion of working fluid in the OCHP. The differential equations of two-phase flow were applied and simultaneous non-linear partial differential equations were solved. From the analysis of the numerical results, it was found that the oscillating motion Of working fluid in the OCHP was affected by the operation and design conditions such as the heat flux, the charging ratio of working fluid and the hydraulic diameter of flow channel. The simulation results showed that the proposed model and solution could be used for estimating the operating mechanism in the OCHP.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.1
• /
• pp.102-111
• /
• 2000

A numerical model which simulates the simultaneous heat and mass transfer within a vertical tube GAX absorber was developed. The ammonia vapor and the solution liquid are in counter-current flow, and the hydronic fluid flows counter to the solution liquid. The film thickness and the velocity distribution of the liquid film were obtained by matching the shear stress at the liquid-vapor interface. Two-dimensional diffusion and energy equations were solved in the liquid film to give the temperature and concentration, and a modified Colburn-Drew analysis was used for the vapor phase to determine the heat and mass fluxes at the liquid-vapor interface. The model was applied to a GAX absorber to investigate the absorption rates, temperature and concentration profiles, and mass flow rates of liquid and vapor phases. It was shown that the mass flux of water was negligible compared with that of ammonia except the region near the liquid inlet. Ammonia absorption rate increases rapidly near the liquid inlet and decrease slowly. Both the absorption rate of ammonia vapor and the desorption rate of water near the liquid inlet increase as the vapor mass flow rate increases, but the mass fluxes of the ammonia and the water near the liquid outlet decrease as the mass flow rate of the vapor increases.

• Structural Engineering and Mechanics
• /
• v.71 no.2
• /
• pp.197-210
• /
• 2019

Probabilistic buckling behavior of sandwich panel considering random system parameters using a radial basis function (RBF) approach is presented in this paper. The random system properties result in an uncertain response of the sandwich structure. The buckling load of laminated sandwich panel is obtained by employing higher-order-zigzag theory (HOZT) coupled with RBF and probabilistic finite element (FE) model. The in-plane displacement variation of core as well as facesheet is considered to be cubic while transverse displacement is considered to be quadratic within the core and constant in the facesheets. Individual and combined stochasticity in all elemental input parameters (like facesheets thickness, ply-orientation angle, core thickness and properties of material) are considered to know the effect of different degree of stochasticity, ply- orientation angle, boundary conditions, core thickness, number of laminates, and material properties on global response of the structure. In order to achieve the computational efficiency, RBF model is employed as a surrogate to the original finite element model. The stiffness matrix of global response is stored in a single array using skyline technique and simultaneous iteration technique is used to solve the stochastic buckling equations.

• The Journal of Internal Korean Medicine
• /
• v.43 no.4
• /
• pp.503-513
• /
• 2022

Objectives: The antitussive, expectorant, and anti-inflammatory effects of Mahwangyounpae-tang (MHYPT) aqueous extracts were observed in appropriate animal models of various respiratory disorders. Methods: MHYPT aqueous extracts were orally administered once a day for 11 days at dose levels of 400, 200, and 100 mg/kg. The effect of MHYPT was determined by comparing its antitussive effect with theobromine (TB), its expectorant effect with ambroxol (AM), and its anti-inflammatory effect with dexamethasone (DEXA). Results: MHYPT aqueous extracts (400 mg/kg) showed favorable antitussive effects comparable to those of TB (50 mg/kg) in the NH₄OH-exposure coughing mouse model and expectorant effects comparable to those of AM (250 mg/kg) in the phenol red-secretion mouse model, but MHYPT (400 mg/kg) showed less anti-inflammatory activity compared to DEXA (1 mg/kg) in the xylene-induced acute inflammatory mouse ear model under the experimental conditions used. Conclusion: MHYPT aqueous extracts administered at dosage levels of 400, 200, and 100 mg/kg induced dose-dependent and favorable antitussive, expectorant, and anti-inflammatory activities that occurred by simultaneous modulation of the activity of mast cells and respiratory mucous production under the experimental conditions used in this study.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.5
• /
• pp.365-376
• /
• 2022

This study aims to look into the causal relationships between corporate social responsibility and firm value, corporate social responsibility and institutional ownership, and firm value and institutional ownership. This study develops a triangle model of causal relationships among the three endogenous variables. Samples for this study are manufacturing companies listed on the Indonesia Stock Exchange for the period 2014-2018. The model is operated in the system of simultaneous equation models using the generalized method of moments technique to estimate parameter coefficients. After controlling the effects of trade-off/balancing capital structure and managerial ownership, the research findings show a positive causal relationship between CSR and firm value and firm value and institutional ownership. Institutional ownership has a positive effect on CSR, while the effect of CSR on institutional ownership is negative in the firms without managerial ownership and positive in the firms with managerial ownership. This study finds that the causal relationship between CSR and firm value is stronger after the trade-off/balancing of capital structure is included in the model. Capital structure has a convex effect on firm value and positively impacts institutional ownership. In addition, an independent commissioner has a negative impact on CSR but has no direct impact on firm value.