• Journal of the Korea Society for Simulation
• /
• v.11 no.3
• /
• pp.1-12
• /
• 2002

Experimental design in simulation provides an efficient way of economizing simulation runs since a considerable number of simulation runs that originally were planned can be reduced by this approach. This experimental design method is an active area of research together with the output analysis and so no single panacea seems to exist so far. Thus, selection of techniques of experimental design and output analysis more likely depends upon the objective of simulation analysis, budget constraint and sometimes the analyst's subjective judgment. This paper attempts to describe an experimental design methodology for port investment analysis using a case study in a bulk terminal in Korea. Detailed display will be focused on simulation period, warm-up period, the number of replications needed in production runs after brief explanation on the system configuration.

• Journal of the Korea Society for Simulation
• /
• v.7 no.2
• /
• pp.1-16
• /
• 1998

This paper presents an automated methodology for campus network design and performance analysis using the rule-based SES and DEVS modeling & simulation techniques. Proposed methodology for structural design and performance analysis can be utilized not only in the early stage of network design for selecting configurable candidate from all possible design alternatives, but also in simulation verification for generating performance data. Our approach supercedes conventional methodologies in that, first, it can support the configuration automation by utilizing the knowledge of design expert ; second, it can provide the simulation-based performance evaluation ; third, it is established on the basis of the well-formalized framework so that it can support a hierarchical and modular system design. Several simulation tests performed on a campus network example will illustrate our technique.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.215-221
• /
• 1997

A new approach in solving design centering problem is presented. Like most stochastic optimization problems, optimal design centering problems have intrinsic difficulties in multivariate intergration of probability density functions. In order to avoid to avoid those difficulties, genetic algorithm and very coarse Monte Carlo simulation are used in this research. The new algorithm performs robustly while producing improved yields. This result implies that the combination of robust optimization methods and approximated simulation schemes would give promising ways for many stochastic optimizations which are inappropriate for mathematical programming.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.730-734
• /
• 2013

The dynamic simulation of machine tools and motion control systems has been widely used for optimization, design verification, control design, etc. There are three main streams in dynamic simulation: structural dynamic analysis based onthe finite element method, dynamic motion analysis based on equations of motion, and control system analysis based on transfer functions. Generally, one of these dynamic simulation methods is chosen and employed for specific purposes. In this study, an integrated dynamic simulation is introduced, in which the structure, motion, and control dynamics are combined together. Commercially well-known software is used in the integrated dynamic simulation: ANSYS, ADAMS, and Matlab/Simulink. Using the integrated dynamic simulation, the dynamics of a magnetic bearing stage is analyzed and the causes of oscillation and noise are identified. A controller design for suppressing a flexible dynamic mode is carried out and verified through the integrated dynamic simulation.

• IE interfaces
• /
• v.1 no.2
• /
• pp.25-34
• /
• 1988

Simulation is known to be a valuable tool for design and operation of Flexible Manufacturing Systems(FMSs) under study. However, in order for simulation to be useful, lots of knowledges about the behavior of system to be designed, statistics for output analysis, modeling techniques and a specific simulation language are required by the simulationist. In this paper a way to build simulation support system for nonexperts at simulation will be described and a simulation support system for FMS design and operation developed by the authors will be demonstrated.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.1
• /
• pp.10-17
• /
• 2016

This paper reports a simulation-based design method for the optimized arrangement design of buoyancy modules in a marine riser system. A buoyancy module is used for the safe operation and structural stability of the riser. Engineers design buoyancy modules based on experience and experimental data. However, they are difficult to design because of the difficulty of conducting real sea experiments and quantifying the data. Therefore, a simulation-based design method is needed to tackle this problem. In this study, we developed a simulation-based design algorithm using a multi-body dynamic simulation and genetic algorithm to perform optimization arrangement design of a buoyancy module. The design results are discussed in this paper.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.6
• /
• pp.449-457
• /
• 2011

The productivity improvement is indispensible to shipbuilding industry for maintaining the world's No. 1. Simulation based production recently has been an issue as prat of efforts to high efficiency production and Korean shipyards requests simulation system tools specialized in a shipbuilding industry. IT convergence project between conventional shipbuilding industry and IT simulation technology has been carried out and integrated simulation framework was proposed as a way to overcome sporadic developments. The framework would provide reusability of kernels and modules and also ensure for expansibilities to other production simulations. The fact that production simulation system should reflect shipyard requirement would be most important. We suggest an analysis process of customer requirements and functional requirements for production simulations. It is partially based on concepts of software engineering and axiomatic design. The process is applied to a design of configuration for simulation framework.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.72-76
• /
• 2001

Experimental design in simulation provides an efficient way of economizing simulation runs since a considerable number of simulation runs that originally were planned can be reduced by this approach. This experimental design method is an active area of research together with the output analysis and so no single panacea seems to exist so far. Thus, selection of techniques of experimental design and output analysis more lithely depends upon the objective of simulation analysis, budget constraint and sometimes the analysts subjective judgment. This paper attempts to describe an experimental design methodology for port investment analysis using a case study in a bulk terminal in Korea. Detailed display will be focused on simulation period, warm-up period, the number of replications needed in production runs after brief explanation on the system configuration.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.126-129
• /
• 2008

This paper concerns the progressive die design for an automotive bracket part aided by the computer simulation in order to eliminate the inferiority such as the crack. The computer simulation of the progressive forming process is utilized in order to investigate cause of the cracks. This paper proposes a new guideline for the die design which modifies intermediate shapes and adds intermediate forming stages in progressive forming process. The effectiveness of the proposed design is verified by the computer simulation. The simulation result shows that the modified die design for the progressive forming process can eliminate the crack and improve quality of the automotive bracket part.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.2
• /
• pp.49-57
• /
• 2007

The purpose of this study was to research the efficient tool of the exclusive fabric simulation in Jacquard Textile CAD system. For performing this design study, it designed the surface design of the abstract images of flowers through EAT Designscope CAD system and simulated the interior fabric. To merchandise the fashion items and see the visual image, these fabric simulations was effected by two or three-dimension modeling through EAT designscope, YongWoo CNI, Alias and so on. The result of this study can be summarized as follows. Before the step of weaving the samples from the surface design works, jacquard fabric design can be done very efficiently to apply the design step of the fabric simulation in CAD(Computer Aided Design). As the usage of the simulation tool in CAD system, jacquard design can be easily feed-back to modify for the right fabrics and produced the various designs in the short running time very efficiently. Therefore, this jacquard design system ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.