• 한국CDE학회논문집
• /
• 제13권5호
• /
• pp.334-341
• /
• 2008

Computer-aided engineering (CAE) analysis is considered essential for product development because it decreases the simulation time, reduces the prototyping costs, and enhances the reusability of product parts. The reuse of quality-assured CAE data has been continually increasing due to the extension of product lifecycle management; PLM, which is widely used, shortens the product development cycle and improves the product quality. However, less attention has been paid to systematic research on the interoperability of CAE data because of the diversity of CAE data and because the structure of CAE data is more complex than that of CAD data. In this paper, we suggest a CAE data exchange method for the effective sharing of geometric and analysis data. The method relies on heterogeneous CAE systems, a virtual reality system, and our developed CAE middleware for CAE data exchange. We also designed a generic CAE kernel, which is a critical part of the CAE middleware. The kernel offers a way of storing analysis data from various CAE systems, and, with the aid of a script command, enabling the data to be translated for a different system. The reuse of CAE data is enhanced by the fact that the CAE middle-ware can be linked with a virtual reality system or a product data management system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.807-810
• /
• 2005

본 논문에서는 무선 네트워크 환경의 모바일 노드에서 전송되는 데이터의 기밀성 모장 및 안전한 전송을 위한 무선 기반의 네트워크 시험환경을 구축하고, 모바일 환경 중 IPv6에 기본으로 내장되어 있는IPSec를 이용한 효율적인 보안전송을 위한 IKEv2의 다중 키 교환 메카니즘에 관한 연구를 진행하였다. 무선망에서 모바일 노드의 핸드오프 패킷 전송 과정에서 끊김과 빈번하게 발생하는 키에 대한 재설정 및 재교환 문제를 해결하기 위해 하나의 단말에 여러 개의 키를 가지고 이동하는 기술을 연구하였다. 실험을 위해 사용된 키 교환 프로토콜은 MIPv6에서 기본적으로 탑재하고 양단간의 신뢰성 있는 암호화키의 관리와 분배를 위해 사용되는 IKEv2 프로토콜을 사용하였다. 본 논문에서는 SSFNet(Scalable Simulation Framework Network Models)이라는 네트워크 보안 시뮬레이터를 이용하여 IKEv2의 보안전송의 키 교환 지연 값을 비교 분석하여 성능을 측정하고 그에 따른 문제점과 개선 방안에 대해 연구하였다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.77-82
• /
• 2001

An intelligent road transport management system focused on microscopic, real-time traffic signal control is proposed. Referring to the development of those systems in Japan, extensive use of image traffic detectors observing the movement of vehicles inside intersections, and direct data exchange between the signal controllers of neighboring intersections are newly assumed. On site investigation of five intersections in Japan or in Malaysia shows the possibility of effective information provision and simple algorithm for solving heavy congestion, as well as easy installation.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.137-144
• /
• 2009

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This study suggest the quantitative modeling about total number of EPCIS event data under the assumption to aware the RFID tags of items, cases(boxes), vehicles(carriers, forklifts, auto guided vehicles, rolltainers) at a time on the reading points. We also estimate the number of created EPCIS event data by the suggested quantitative modeling under scenario of process in the integrated logistics center based on RFID system And this study compare the TO-BE model with the AS-IS model about the total sizes of created EPCIS event data using the simulation, in which we suggested the TO-BE model as the development of the repository by skipping the overlapped records.

• Computers and Concrete
• /
• 제34권1호
• /
• pp.123-135
• /
• 2024

Strain-hardening cement-based composites (SHCC) under cracked condition exhibits remarkable capillary absorption due to water ingress from multiple cracks. Surface treatment using water repellent agents is an effective way for improving water resistance of SHCC, but the water resistance may remarkably decrease when cracks penetrate impregnation depth. Another way is to add water repellent agents directly into the mixture, offering SHCC integral water repellency even if cracks form later. However, although integral water repellent treatment has been proved feasible by previous studies, there is still lack of simulation work on the treated SHCC for evaluating its durability. This study presents a simulation method for capillary absorption of cracked SHCC with integral treatment based on a multi-scale approach proposed in the authors' previous work. The approach deals with water flows in bulk matrix and multiple cracks using two individual transport equations, respectively, whereas water absorbed from a crack to its adjacent matrix is treated as the mass exchange of the two equations. In this study, the approach is enhanced for the treated SHCC by integrating the influencing of water repellency into the two transport equations as well as the mass exchange term. Using the enhanced approach, capillary absorption of water repellent SHCC under cracked condition is simulated, showing much more reduced water ingress than the untreated concrete, which is consistent with total absorption data from previous tests. This approach is also capable of simulating water spatial distribution with time in treated SHCC reasonably.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
• /
• pp.161-164
• /
• 2000

We propose the genetic algorithm to apply three kinds of FFT data flows to be considered the overhead for the data exchange between processors that have the multi-scheduling problem on parallel computer In the design of genetic algorithm, we propose the chromosome representation which can simply encode and decode a solution without any heuristic information, the evaluation function to be considered an efficiency of processor, and the genetic operator to inherit a superior gene from their parents. And we saw that the simulation result can verify better performance than the existing algorithm(BEA : binary exchange algorithm)in the face of execution time.

• 에너지공학
• /
• 제14권2호
• /
• pp.98-104
• /
• 2005

Pannier-arrangement condensers are usually adopted in the turbine generator units of combined cycle power plants. Optimization of operating performance and economy is an important goal, which requires accurate understanding of flow and heat transfer effects in the condenser. The tube bundle arrangement and steam flow behaviors of pannier-arrangement condensers are very different from those of common condensers. The physical model for existing numerical simulation program of condenser is refined by constructing the correlations for flow resistance and condensation heat exchange coefficient in which the influences of steam flow direction are considered according to available experimental data. The adaptability of the developed physical model and simulation program of pannier-arrangement condenser is verified with available experimental data.

• 한국통신학회논문지
• /
• 제16권7호
• /
• pp.651-662
• /
• 1991

공개키 암호화에 대한 지수계산 방법의 개선과 serial 통신선에 실용적으로 적용하는 방법을 제시한다. RSA 형의 암호화 및 복호화 회로에 사용하기 위한 고속 modular 곱셈 알고리즘을 개선하였다. 기존의 고석 modular 곱셈 알고리즘에서 비교 과정에 사용되는 control bit 값 선정을 개선하여 부분곱과 modular 값의 비교과정에서 오류가 발생되지 않도록 하였다. 이 개선된 알고리즘은 C언어를 사용하여 작성한 simulation program에 의한 simulation을 통하여 그 정상 동작을 확인하였다. 또한 computer간의 serial 통신선에서 입력되는 serial 통신선에서 입력되는 serial data를 sampling하여 이것을 RSA방식으로 암호화하여 송신하게 되고 수신측에서는 이의 역순으로 처리하며, 이 sampling 및 암호화에 Z80 miroprocessor를 중심으로 암호회로를 설계, 제작하였다.

• Journal of Magnetics
• /
• 제9권2호
• /
• pp.60-64
• /
• 2004

In this paper calculations of magnetisation and magnetoresistance characteristics of the Spin Valve (SV) and Pseudo Spin Valve (PSV) spintronics structures are reported and compared with the experimental data. The magnetisation reversal process was analysed with respect to the Stoner- Wohlfahrt model of total surface energy in terms of uniaxial anisotropy, exchange coupling between ferromagnetic layers, unidirectional exchange anisotropy of pinned layer (modelled by exchange coupling between magnetisation of pinned layer and net magnetisation of antiferromagnetic layer with high anisotropy). The numerical simulation of the model to the experimental magnetisation data yielded the above parameters for SV and PSV structures. These parameters were used to more sophistically micromagnetic modelling tool originating from the project called Object Oriented Micromagnetic Framework. Influence of the shape anisotropy of the Magnetic Tunnelling Junction cell used in MRAM was simulated by means of micromagnetic simulations. Results were compared to those obtained from the spot Kerr measurements.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.209-214
• /
• 2005

In this paper, finite element simulation of three-dimensional bulk metal forming processes is performed by an automated adaptive tetrahedral mesh generation scheme. A dynamic data exchange scheme is employed between tetrahedral mesh generator and forging simulator to minimize user intervention. Both number of elements and density distributions are controlled by the octree technique. The presented approach is applied to automatic forging simulation in order to evaluate the efficiency of the developed schemes and the simulation results are compared with $DEFORM^{TM}$.