• Journal of Information Processing Systems
• /
• v.9 no.3
• /
• pp.499-510
• /
• 2013

Hardware-Software co-simulation of a multiple image encryption technique shall be described in this paper. Our proposed multiple image encryption technique is based on the Latin Square Image Cipher (LSIC). First, a carrier image that is based on the Latin Square is generated by using 256-bits of length key. The XOR operation is applied between an input image and the Latin Square Image to generate an encrypted image. Then, the XOR operation is applied between the encrypted image and the second input image to encrypt the second image. This process is continues until the nth input image is encrypted. We achieved hardware co-simulation of the proposed multiple image encryption technique by using the Xilinx System Generator (XSG). This encryption technique is modeled using Simulink and XSG Block set and synthesized onto Virtex 2 pro FPGA device. We validated our proposed technique by using the hardware software co-simulation method.

• Journal of the Korea Society for Simulation
• /
• v.12 no.4
• /
• pp.41-50
• /
• 2003

HLA (High Level Architecture) is the object, time, and interface standard that proposed for distribution simulation in the US Department of Defense. The HLA is defined by three components: Rules, the HLA Interface Specification, and the Object Model Template (OMT). The RTI (Run-Time Infrastructure) software implements the interface specification. It provides services to simulation applications. To test whether a RTI software is suitable for the standard and all service was implemented is performed through two phases of processes proposed by DMSO. In this paper, we implement Level One Test Procedures of DMSO and apply to NetCust's RTI software. The experimental results are discussed.

• Journal of the military operations research society of Korea
• /
• v.23 no.1
• /
• pp.47-62
• /
• 1997

This paper is aimed to investigate the applicability of SMG method to the development of an object-oriented simulation software in the MODSIM II environment. SMG method is an object-oriented simulation software development method proposed by System Modeling Group(SMG), National Defense University of Korea. Through this study, we concluded that SMG method can be a powerful method for the development of object-oriented simulation software in the MODSIM II environment. However, SMG method lacks in depicting some of messages in the MODSIM II, for example, ASK method, TELL method, WAITFOR method, interrupt. In the future, SMG method is expected to extend for incorporating those things presumably by referring to Professor Baileys pictures, OOSPICs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.181-185
• /
• 2006

A study to get better vehicle fuel economy is described based on an express bus. The approach is based on using a commercial software vehicle simulation to identify the relative efficiency of each of the vehicle systems, such as the engine hardware, engine software calibration, transmission, cooling system and ancillary drives. The simulation-based approach offers a detailed understanding of which vehicle systems are underperforming and by how much the vehicle fuel economy can be improved if those systems are brought up to best-in-class performance. In this way, the optimum vehicle fuel economy can be provided to the vehicle customer. A further benefit is that the simulation requires only a minimum of vehicle testing for initial validation, with all subsequent field test cycles performed in software, thereby reducing development time and cost for the manufacturer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1218-1224
• /
• 2017

With the increasing risk in building liquefied natural gas carriers (LNGC), pre-simulation of various scenarios is required for system integration and safe operation. In particular, the power management system (PMS) is an important part of the LNGC; it works in tight integration with the power control systems to achieve the desired performance and safety. To verify and improve unpredicted errors, we implemented a simulation model of power generation and consumption for testing PMS based on software-in-the-loop (SIL) method. To control and verify the PMS, numeric and physical simulation modeling was undertaken utilizing MATLAB/Simulink. In addition, the simulation model was verified with a load sharing test scenario for a sea trial. This simulation allows shipbuilders to participate in new value-added markets such as commissioning, installation, operation, and maintenance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.91-101
• /
• 2023

Modeling and Simulation(M&S) technology has been widely used to solve constraints such as time, space, safety, and cost when we implement the same development and test environments as real warfare environments to develop, test, and evaluate weapon systems for the last several decades. The integration and test environments employed for development and test & evaluation are required to provide Live Virtual Construction(LVC) simulation environments for carrying out requirement analysis, design, integration, test and verification. Additionally, they are needed to provide computing environments which are possible to reconfigure computing resources and software components easily according to test configuration changes, and to run legacy software components independently on specific hardware and software environments. In this paper, an Integration Test and Simulation for Engagement Control(ITSEC) bed using a bare-metal virtualization mechanism is proposed to meet the above test and simulation requirements, and it is applied and implemented for an air missile defense system. The engagement simulation experiment results conducted on air and missile defense environments demonstrate that the proposed bed is a sufficiently cost-effective and feasible solution to reconfigure and expand application software and computing resources in accordance with various integration and test environments.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.5
• /
• pp.400-407
• /
• 2005

Reverse engineering is defined as the process where the internal structures and dynamics of a given system are inferred and analyzed from external observations and relevant knowledge. The first part of this paper surveys existing techniques for biosystem reverse engineering. Network structure inference techniques such as Correlation Matrix Construction (CMC), Boolean network and Bayesian network-based methods are explained. After the numeric and logical simulation techniques are briefly described, several representative working software tools were introduced. The second part presents our component-based software architecture for biosystem reverse engineering. After three design principles are established, a loosely coupled federation architecture consisting of 11 autonomous components is proposed along with their respective functions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.321-326
• /
• 1992

In this paper, a high performance graphics system is suggested and its hardware architecture and software structure are described. The developed graphics system is a multi-processing system that uses 6 i860 RISC CPU's and supports PHIGS language in a hardware level. The software is programmed with respect to the graphics pipeline and the software modules are distributed into each processor for the optimization of the performance. The implemented graphics system can draw about 100,000 3D polygons second.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.10a
• /
• pp.112-113
• /
• 2005

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.769-778
• /
• 2016

Technical approach on the modeling, simulation and experimentation methods, which are applied for developing a constructive simulation and engagement experimentation software for supporting light weight torpedo operational tactics study, is introduced. Conceptual modeling for the weapon engagement and simulation entities, mathematical models for the simulation elements, approach for the design of experimentations are described, and screen shots of the software are also presented as some example results of experimentation and analysis. It is found that the simulation and experimentation results are useful to support and fulfill the mission needs and requests. As a consequence, the technical approach is rated to be appropriate to accomplish the dedicated purpose of the simulation and experiments.