• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.544-553
• /
• 2008

The general sensor network uses bundle method to collect fixed information from sensor node. However, this method is difficult to actively cope with major sensing objects in healthcare environment including status and position change of person and change of surrounding environment. In order to support the healthcare environment, certain information should be provided in accordance with the change of status of person and surrounding circumstance and also must cope with the change of network type by movement of person. This paper analyzes LEACH protocol which guarantees effectiveness of network as it constitutes clusters between Agilla model that is a representative multi agent middle ware and surrounding nodes. Based on the result of this analysis, it suggests LEACH_Mobile protocol which guarantees node mobility that is the weakest point of LEACH protocol. Moreover, it designs mobility agent middleware which supports dynamic function change of node and mobility agent module which supports dynamic function change of mobile node as components of LEACH_Mobile routing module. In addition, it is definitely increase performance which in mobile node of transfer data rate through LEACH_Mobile protocol of simulation result.

• The KIPS Transactions:PartC
• /
• v.17C no.2
• /
• pp.189-196
• /
• 2010

The LEACH does not use flooding method for data transmission and this makes low power consumption. So performance of the WSN is increased. On the other hand, QoS based algorithm which use restricted flooding method in WSN also achieves low power consuming rate by reducing the number of nodes that are participated in routing path selection. But when the data is delivered to the sink node, the LEACH choose a routing path which has a small hop count. And it leads that the performance of the entire network is worse. In the paper we propose a QoS based energy efficient clustering and routing algorithm in WSN. I classify the type of packet with two classes, based on the energy efficiency that is the most important issue in WSN. We provide the differentiated services according to the different type of packet. Simulation results evaluated by the NS-2 show that proposed algorithm extended the network lifetime 2.47 times at average. And each of the case in the class 1 and class 2 data packet, the throughput is improved 312% and 61% each.

• The Korean Journal of Emergency Medical Services
• /
• v.19 no.2
• /
• pp.7-17
• /
• 2015

Purpose: This study aimed to compare the effects of rescue ventilation maneuvers on the quality of two-rescuer cardiopulmonary resuscitation (CPR). Methods: We implemented mouth to mouth (MMV), mouth to pocket mask (MPV) and bag-valve mask ventilation (BMV) maneuvers. Each team of two-nurses was randomized to perform three consecutive sessions of two-rescuer CPR by using three artificial ventilation maneuvers. Results: The subjects were 26 teams of nurses (female: 96.2%, male: 3.8%, age: 26.6 years). Failed ventilation was more frequent in BMV ($2.23{\pm}2.21$, p <.001) than MMV ($0.31{\pm}0.74$) and MPV ($0.38{\pm}0.64$). BMV had more compressions per minute ($93.7{\pm}5.7$) than MMV ($87.0{\pm}7.2$, p = .001) and shorter total compression pause time ($46.1{\pm}5.8sec$) and compression pause fraction ($23.3{\pm}2.2%$) than MMV ($54.8{\pm}10.3sec$, p = .001, $25.5{\pm}3.5%$, p = .001, respectively) and MPV ($53.1{\pm}7.1sec$, p =. 006 and $25.8{\pm}2.6%$, p = .006, respectively). Conclusion: In our simulation study, BMV reduced the compression pause time and increased the number of compressions per minute, thus indicating CPR provided to patients was effective. However, considering the high rate of ventilation failure, we recommend periodic training.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.458-467
• /
• 2009

Long Tenn Evolution (LTE) is the next generation mobile phone technology which has being standardized by the Third Generation Partnership Project (3GPP). In the existing mobile communication networks, voice traffic is delivered through circuit switched networks. In LTE, however, all kinds of traffic are transferred through IP based packet switched networks which has best-effort characteristic. Therefore, providing QoS in LTE system is difficult. In order to provide QoS in LTE, RRM is very important. Especially, in part of RRM, call admission control (CAC) performs an important function to reduce network congestion and guarantee a certain level of QoS for on-going calls. In this paper, we propose a CAC algorithm in order to provide QoS for various kinds of services in LTE system. The performance of the proposed algorithm is evaluated with various simulation environments. The results show that the proposed algorithm provides QoS through rejections of requested calls. Especially, the proposed CAC algorithm can be satisfied with packet delay requirement defined in LTE specification.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.57-67
• /
• 2015

A large amount of work has been done in the areas of routing, MAC, QoS, capacity, location service, cooperative communication, fault tolerance, mobility models and various applications of mesh networks thanks to their merits of cost-effective way of deployment and flexibility in extending wireline services. Although multi-path routing protocols have been proposed to be used to provide QoS and fault-tolerance, there has not been any significant results discussed that support both in the literature to our best knowledge as they are often required in military and public safety applications. In this paper, we present a novel routing protocol for a mesh network based on the OFDM-TDMA collision-free MAC that discovers and maintains multiple paths that allows retransmitting and forwarding packets that have been blocked due to a link failure using an alternative next-hop node such that the delay-capacity tradeoff is reduced and the reliability is enhanced. Simulation results show that the proposed protocol performs well in terms of both the QoS and delivery ratio.

• Geomechanics and Engineering
• /
• v.22 no.5
• /
• pp.449-460
• /
• 2020

The double-lane arrangement model is frequently used in underground coal mines because it is beneficial to improve the mining efficiency of the working face. When the double-lane arrangement is used, the service time of the reserved roadway increases by twice, which causes several difficulties for the maintenance of the roadway. Given the severe non-uniform deformation of the reserved roadway in the Buertai Coal Mine, the stress distribution law in the mining area, the failure characteristics of roadway and the control effect of support resistance (SR) were systematically studied through on-site monitoring, FLAC 3D numerical simulation, mechanical model analysis. The research shows that the deformation and failure of the reserved roadway mainly manifested as asymmetrical roof sag and floor heave in the region behind the working face, and the roof dripping phenomenon occurred in the severe roof sag area. After the coal is mined out, the stress adjustment around goaf will happen to some extent. For example, the magnitude, direction, and confining pressure ratio of the principal stress at different positions will change. Under the influence of high-stress rotation, the plastic zone of the weak surrounding rock is expanded asymmetrically, which finally leads to the asymmetric failure of roadway. The existing roadway support has a limited effect on the control of the stress field and plastic zone, i.e., the anchor cable reinforcement cannot fully control the roadway deformation under given conditions. Based on obtained results, using roadway grouting and advanced hydraulic support during the secondary mining of the panel 22205 is proposed to ensure roadway safety. This study provides a reference for the stability control of roadway with similar geological conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1359-1366
• /
• 2007

The recent, a large capacity of communication is required in order to it is in proportion to capacity of information communication increase and to satisfy a demand because of the demand about Internet, a multimedia service of Video of internet protocol(VoIP), Audio/Video steaming. DWDM(Dense Wavelength Division Multiplexing) technique has been emerged as the method of solving it without additional optical fiber network building and hish-speed equipment. Therefore this thesis proposed the optical filter of fiber/multilayer slab coupled structure combining it to multilayer slab waveguide by polishing the cladding of one side of fiber to design the optical filter having these functions. The optical filter proposed as the simulation result satisfies DWDM filter characteristic; 1) when the separation distance between fiber and slab is $4.15{\mu}m$ at the communication window of $1.5{\mu}m$, the polarization independence is 65nm, 2) when the center wavelengths about TM mode and TE mode are each ${\lambda}_0=1.54946\;{\mu}m$ and ${\lambda}_0=1.6144\;{\mu}m$ and, FWHM(Full at Half Maximun) is 0.1nm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.485-492
• /
• 2008

Computers used fer light-weight computing environments are considerably limited in resources and performance running in ubiquitous environment. Because of the limited resources, it is difficult to apply existing security technologies to the light-weight computers. In this paper, light-weight security software is implemented using RC-5 encryption and SHA-1 authentication algorithm which is appropriate for light-weight computing environments. The design of components based on security software of a light-weight computer application and the test-bed for security software are presented. The simulation verifies the correctness of the security software. The architecture of the light-weight and reconfigurable security software for light-weight computer applications is proposed. The proposed security software is small size and provides reconfigurable security library based on the light-weight component and the software manager that configures software platform is loaded with the library at the time it is needed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.206-215
• /
• 2007

Ad-Hoc network technology is a mobile internet technology of the future that will be used widely not only in Mobile Network but also in Wireless Personal Area Network (WPAN) and Ubiquitous Network For this to occur, distributed routing protocol design, loop prevention for link information reduction in overhead for control messages and route restoration algorithm must be improved or complemented. Security techniques that can guarantee safe com-munication between Ad-Hot nodes net also be provided. This study proposes and evaluates a new authentication mechanism for MANET. The mechanism segregates the roles of certification authority to keep with the dynamic mobility of nodes and handle rapid and random topological changes with minimal over-head. That is, this model is characterized by its high expandability that allows the network to perform authentication service without the influence of joining and leaving nodes. The efficiency and security of this concept was evaluated through simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1574-1581
• /
• 2007

DVB-H (Digital Video Broadcasting for Handhold) is a new standard, currently being developed for a portable digital broadcasting, which enhance the multimedia broadcasting service in the Euroapean standard DVB-T (DVB-Terrestrial). Seamless mobility and power saving are essential requirements in the DVB-H system. To support seamless mobility, DVB-H system should provides seamless handover for mobile stations in the MFN (multi frequency network). For seamless handover, the receiver should monitor neighboring cells and it increases the power consumption. And so, power efficient sell searching algorithm for seamless handover is required. In this paper, we propose hypothesis feeling based handover algorithm to enhance the power efficiency by using the fast cell searching, and analyze the performance of handover schemes through the numerical evaluation and simulation.