• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.10
• /
• pp.458-464
• /
• 1986

This paper introduces a method for design verification and performance evaluation of flight control system. The method is a real time hardware in the loop simulation using the hybrid computer and motion table facility. As a typical illustration, a roll control system of flight vehicle is applied. The simulation validity is demonstrated by comparing hardware test results with analog simulation results.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.59-65
• /
• 2011

In this study, LCD Cell process has been analyzed through ARENA simulation. The major concern is to find the condition maximizing production rate (or quantity per hour). For the analysis, we have selected 4 factors and performed simulation experiments through $L_8(2^7)$ orthogonal arrays. Our results indicate that the production may be maximized with well selected conditions proposed in this study. The results obtained from this study may provide a good base for practical applications.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.775-778
• /
• 2003

In this paper, we report our quantum mechanical approach for the analysis of FinFET in a self-consistent manner. The simulation results are carefully investigated for FinFET with an electrical channel length(Leff) of 30nm and with a fin thickness(Tsi) of 10～35nm. We also demonstrated the differences in the simulations for the classical and quantum-mechanical simulation approaches, respectively. These simulation results also imply that it is necessary to solve the coupled Poisson and Schrodinger equations in a self-consistent manner for analyzing the sub-30nm MOSFETS including FinFET.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.135-140
• /
• 1992

This paper presents the configuration, HILS procedure and performance simulation results of the RPV autopilot including a strapdown AHRS. Real time hardware-in-the-loop simulation was performed by using a 3 axis flight motion simulator alonged assumed flight trajectory of the RPV. Being compared with the result of the 6 DOF simulation, the HILS results showed that the performance of the autopilot was satisfactory.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.725-728
• /
• 2002

In this Paper, a mathematical model describing the dynamics of pilot operated pressure control valve was derived. A attempt to analyze the Parameters(seat diameter, cone angle, spring stiffness, control volume) which relate to the performance of the object valve was carried out. Simulation using AMESim as a simulation tool was operated, and verified the validity of our simulation by means of comparison our simulation results with an experimental results of the pilot operated pressure control valve.

• Journal of the Korea Society for Simulation
• /
• v.8 no.1
• /
• pp.35-49
• /
• 1999

The CC-NUMA based, distributed shared memory is an emerging architecture for multiprocessor computer systems because of its scalability and easy of programming. In this paper, we analyzed performance of a ring-based, CC-NUMA multiprocessor computer system using a commercial workload targeted for popular OLTP applications. Based on the traces collected from real machines, the characteristics of the commercial workload could be obtained. The simulation results showed that the bottleneck on the ring could be effectively removed by using a dual ring structure. We believe our simulation methodology and results will help us to design better multiprocessor computer systems for commercial application domains.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.11
• /
• pp.507-517
• /
• 2005

This paper presents the results of critical contingency analysis for the Korean power system which is performed to identify the impact of the critical contingencies on the Korean power system and set up a short term system operation planning for the purpose of preventing large scale blackout. The static and dynamic simulation is carried out for each critical contingency and the simulation results for each contingency are shown under the peak load condition for the year 2005, 2007 and 2010.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.33-35
• /
• 2016

Fibrous dysplasia(FD) is a disorder in which normal bone is replaced with pathologic tissue. When occurring in craniofacial regions, the zygomaticomaxillary complex is most commonly affected and this pathologic lesion results in facial asymmetry. and By using computer-assisted virtual simulation, precise maxillofacial contouring was achieved for harmonious facial morphology and the surgical procedure was simplified and the surgery brought satisfactory results in terms of both esthetics and functionality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.60-67
• /
• 2005

Generally. in the molecular dynamics simulations. the Verlet neighboring list algorithm is used for the reduction of a simulation time On the other hand. the application of the Verlet neighboring list forces the time evolution of a simulation system to follow an unrealistic path in a phase space. In equilibrium state, it does not matter with the simulation results because the individual molecule's motion is originally random and any effect due to a small deviation from a real time evolution can be completely ignored. However, if an unsteady state is involved. such a deviation may significantly affect to the results. That is, there is a Possibility that the simulation results Provide ones with any misleading data In this study we evaluated the effect due to the Verlet neighboring list in performing the simulation of a non-equilibrium state and suggested the method to avoid it.

• Journal of Internet Computing and Services
• /
• v.21 no.3
• /
• pp.41-51
• /
• 2020

EDISON is a web-based platform that provides easy and convenient use of simulation software on high-performance computers. One of the most important roles of a computational science platform, such as EDISON, is to post-process and represent the simulation results data so that the user can easily understand the data. We interviewed EDISON users and collected requirements for post-processing and represent of simulation results, which included i) flexible data representation, ii) supporting various data representation components, and iii) flexible and easy development of view template. In previous studies, it was difficult to develop or contribute data representation components, and the view templates were not able to be shared or recycled. This causes a problem that makes it difficult to create ecosystems for the representation tool development of numerous simulation software. EDISON-VIEW is a framework for post-processing and representing simulation results produced from the EDISON platform. This paper proposes various methods used in the design and development of the EDISON-VIEW framework to solve the above requirements and problems. We have verified its usefulness by applying it to simulation software in various fields such as material, computational fluid dynamics, computational structural dynamics, and computational chemistry.