• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.909-916
• /
• 2024

The emergence of Building Information Modelling (BIM), reality data, Virtual Reality (VR), and Augmented Reality (AR) has significantly enhanced the collaboration between stakeholders in construction management. The utilization of VR/AR devices holds considerable potential for monitoring safety in complex and constrained working environments on the construction site. On the other hand, near-miss incidents remain an important early sign of struck-by accidents. However, research on early warning and prevention methods for this risk is still limited. This paper, therefore, presents a framework for on-site and off-site collaborative safety monitoring framework using augmented and virtual reality for near-miss incidents. In the proposed framework, three phases to develop a VR/AR-based safety monitoring system include (1) construction safety simulation environment, (2) localization-based interaction system, and (3) safety monitoring system. The system can undertake the processing of data and enables communication among disparate VR/AR devices. VR clients are observational tools and offer guidance, while the AR client stays onsite for construction tasks. All clients connect to a processing computer, which also works as a host. The system embedded in the AR device can trigger an alarm or receive signals from the VR client when a near-miss issue happens. Additionally, all device clients possess the capability to share data acquired from onsite monitoring cameras, thereby fostering effective discussions and decision-making. The efficacy of this cross-platform system has been validated through the implementation of an outdoor coordination case study.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.625-633
• /
• 2015

In this study, a coupled probabilistic framework is developed to assess wind risk on apartment buildings by using the convolution of wind hazard and fragility functions. In this framework, typhoon induced extreme wind is estimated by applying the developed Monte Carlo simulation model to the climatological data of typhoons affecting Korean peninsular from 1951 to 2013. The Monte Carlo simulation technique is also used to assess wind fragility function for 4 different damage states by comparing the probability distributions of the window system's resistance performance and wind load. Wind hazard and fragility functions are modeled by the Weibull and lognormal probability distributions based on simulated wind speeds and failure probabilities. The modeled functions are convoluted to obtain the wind risk for the different damage levels. The developed probabilistic framework clearly shows that wind risk are influenced by various important characteristics of terrain and apartment building such as location of building, exposure category, topographic condition, roof angle, height of building, etc. The risk model presented in this paper can be used as tools to predict economic loss estimation and to establish wind risk mitigation plan for the existing building inventory.

• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.1-7
• /
• 2020

In order to implement a smart factory for manufacturing innovation, more digital twins will be developed and applied gradually. In particular, simulation and optimization of digital twins makes it possible to support critical decision-making like a predictive maintenance of the equipment for manufacturing. In terms of a user perspective, this study suggests the conceptual framework of Digital Twin Management System (DTMS) for supporting the analytical and managerial activities for Digital Twins. We integrate the methods and structure of the area like Manufacturing Engineering, Decision Support Systems, and Optimization for developing the DTMS. The framework suggested in this study shows a typical DSS which consists of dialog management system, model management system and data management system. It also includes Analytical Digital Twins and simulations & optimization module. The framework is being applied in one of the most competitive and complex industrial sector. Also this study is meaningful to suggest a new direction of research.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.83-96
• /
• 2017

This study presented a surface water quality modeling framework considering the spatial resolution of pollutant load estimation to better represent stream water quality characteristics in the Saemangeum watershed which has been focused on keeping its water resources sustainable after the Saemangeum embankment construction. The watershed delineated into 804 sub-watersheds in total based on the administrative districts, which were units for pollutant load estimation and counted as 739 in the watershed, Digital Elevation Model (DEM), and agricultural structures such as drainage canal. The established model consists of 7 Mangyung (MG) sub-models, 7 Dongjin (DJ) sub-models, and 3 Reclaimed sub-models, and the sub-models were simulated in a sequence of upstream to downstream based on its connectivity. The hydrologic calibration and validation of the model were conducted from 14 flow stations for the period of 2009 and 2013 using an automatic calibration scheme. The model performance to the hydrologic stations for calibration and validation showed that the Nash-Sutcliffe coefficient (NSE) ranged from 0.66 to 0.97, PBIAS were -31.0~16.5 %, and $R^2$ were from 0.75 to 0.98, respectively in a monthly time step and therefore, the model showed its hydrological applicability to the watershed. The water quality calibration and validation were conducted based on the 29 stations with the water quality constituents of DO, BOD, TN, and TP during the same period with the flow. The water quality model were manually calibrated, and generally showed an applicability by resulting reasonable variability and seasonality, although some exceptional simulation results were identified in some upstream stations under low-flow conditions. The spatial subdivision in the model framework were compared with previous studies to assess the consideration of administrative boundaries for watershed delineation, and this study outperformed in flow, but showed a similar level of model performance in water quality. The framework presented here can be applicable in a regional scale watershed as well as in a need of fine-resolution simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.368-376
• /
• 2009

Over recent years, the development of multimedia devices has meant that a wider multimedia streaming service can be supported, and there are now many ways in which TV channels can communicate with different terminals. Generally, scalable video streaming is known to provide more efficient channel capacity than simulcast video streaming. Simulcast video streaming requires a large network bandwidth for all resolutions, but scalable video streaming needs only one flow for all resolutions. On the contrary, to preserve the same video quality, SVC(Sealable Video Coding) needs a higher bit-rate than AVC(non-layered Video Coding) due to the coding penalty($10%{\sim}30%$). In previous research, scalable video streaming has been compared with simulcast video streaming for network channel capacity, in two-user simulation environments. The simulation results show that the channel capacity of SVC is $16{\sim}20%$ smaller than AVC, but scalable video streaming is not efficient because of the limit of the present network framework. In this paper, we propose a new network framework with a new router using EDE(Extraction Decision Engine) and SVC Extractor to improve network performance. In addition, we compare the SVC environment in the proposed framework with previous research on the same way subject. The proposed network framework shows a channel capacity 50%(maximum) lower than that found in previous research studies.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.1-9
• /
• 2019

An agent-based simulation is a popular simulation tool to solve various problems, such as stock market, population prediction, disease prediction, and development of a traffic system. As the agents are developed and researched in different application fields, the agent has a rigid structure and may not acceptable in different domains. As a result, it is a challenging problem to define a structure for an agent structure to reflect the researcher's simulation objective. This research proposes an extendable form for an agent and its modeling environment. In order to propose a standard structure, this study adopts system entity structure and discrete event system specification formalism. Also, this research introduces the SESManager which supports the proposed specification method. The proposed environment can hierarchically define the agent structure and synthesize the agent so that it can perform the agent simulation according to the user's simulation purpose.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.20 no.2
• /
• pp.212-222
• /
• 2014

Purpose: The purpose of this study was to evaluate the nursing students' clinical judgment skills in simulation using Tanner's Clinical Judgment Model. Method: Forty-five teams of a total 93 nursing students participated in a post-operative patient care scenario using human patient simulator. Data were collected from students' responses in scenario and guided reflective journaling according to the framework of Tanner's model which comprised noticing, interpreting, responding, and reflecting on response. Data were analyzed using descriptive statistics. Results: The students' responses of the situation were in accordance with the goals of scenario, i.e. relieving patient' pain and preventing pulmonary complications. However, most of students needed clinical cues and focused on a given clue to solve the issues. They were lack of ability to collect additional information as well as connect the relevant clues in simulated clinical situation. Conclusion: The nursing students have difficulty in what they notice, how they interpret finding, and respond appropriately to the situation. The simulation training using Tanner's model could provide faculty and nursing students with an effective teaching and learning strategy to develop the clinical judgment skills.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.4
• /
• pp.351-372
• /
• 2017

Propulsion in waves is a complex physical process that involves interactions between a hull, a propeller, a shaft and a prime mover which is often a diesel engine. Among the relevant components, the diesel engine plays an important role in the overall system dynamics. Therefore, using a proper model for the diesel engine is essential to achieve the reasonable accuracy of the transient simulation of the entire system. In this paper, a simulation model of a propulsion system in waves is presented with emphasis on modeling a two-stroke marine diesel engine: the framework for building such a model and its mathematical descriptions. The models are validated against available measurement data, and a sensitivity analysis for the transient performance of the diesel engine is carried out. Finally, the results of the system simulations under various wave conditions are analyzed to understand the physical processes and compare the efficiency for different cases.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.36-42
• /
• 2003

A CFD simulation technique has been developed to handle the unsteady body motion with large amplitude by use of overlapping multi-block grid system. The three-dimensional, viscous and incompressible flow around body is investigated by solving the Navier-Stokes equations, and the motion of body is represented by moving effect of the grid system. Composite grid system is employed in order to deal with both the body motion with large amplitude and the condition of numerical wave maker in convenience at the same time. The governing equations, Navier-Stokes (N-S) and continuity equations, are discretized by a finite volume method, in the framework of an O-H type boundary-fitted grid system (inner grid system including test model) and a rectangular grid system (outer grid system including simulation equipments for generation of wave environments). If this study, several flow configurations, such as an oscillating cylinder with large KC number, are studied in order to predict and evaluate the hydrodynamic forces. Furthermore, the motion simulation of a Series 60 model advancing in a uniform flow under the condition of enforced roll motion of angle 20$^{\circ}$ is performed in the developed numerical wave tank.

• Journal of Biomedical Engineering Research
• /
• v.41 no.4
• /
• pp.154-164
• /
• 2020

Various simulator systems for surgery training have been developed and recently become more widely utilized with technology advancement and change in medical education adopting actively simulation-based training. The authors have developed tissue-instrument interaction modeling and graphical simulation algorithms for an arthroscopic surgery training simulator system. In this paper, we propose algorithms for basic surgical techniques, such as cutting, shaving, drilling, grasping, suturing and knot tying for rotator cuff surgery. The proposed method constructs a virtual 3-dimensional model from actual patient data and implements a real-time deformation of the surgical object model through interaction between ten types of arthroscopic surgical tools and a surgical object model. The implementation is based on the Simulation Open Framework Architecture (SOFA, Inria Foundation, France) and custom algorithms were implemented as pulg-in codes. Qualitative review of the developed results by physicians showed both feasibility and limitations of the system for actual use in surgery training.