• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.261-267
• /
• 2018

In the present study, we assessed the effecs of fruit and vegetable bark resources rich in beneficial substances on the learning ability and memory improvement. It functions to inhibit the activity of acetylcholinesterase in brain tissue and improve cognitive functions in a simulation model of cognitive impairment induced by scopolamine. Hence, it can promote memory and learning ability. The formulation of the fruit and vegetable bark uses the extract of fruit and vegetable peels, which has long been used without causing toxicity in a wide range of food applications. Therefore, it can be used safely without a risk of side effects, even in the case of a long-term administration for the preventive purpose. Furthermore, the present study is a very beneficial study in the environment-friendly aspect in association with recycling of resources as it is based on the novel efficacies of fruit and vegetable barks which have been conventionally disposed as a refuse of fruits due to their poor sensory qualities despite the content of beneficial substances.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1062-1070
• /
• 2015

This paper presents an application of an optimal smoothing filter for moving target tracking problem based on measured noise source. In order to measure distance and velocity for the moving target, a beamforming method is applied to use the noise source by using microphone array. Also a Kalman filter and an optimal smoothing algorithm are adopted to improve accuracy of trajectory estimation by using a Singer target model. The simulation is conducted with a missile dynamics to verify performance of the optimal smoothing filter, and a model rocket is used for experiment environment to compare the trajectory estimation results between the beamforming, the Kalman filter, and the smoother. The Kalman filter results show better tracking performance than the beamforming technique, and the estimation results of the optimal smoother outperform the Kalman filter in terms of trajectory accuracy in the experiment results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.4
• /
• pp.37-46
• /
• 2002

The main purpose of this research is to discuss the urban heat island which will be caused by urbanization, especially by the construction of new town on a wide green zone. Over the last ten years, five new towns have been developed around the Seoul metropolitan area. However these new towns become bedroom communities and create traffic problems between Seoul and its surrounding areas because of an increase in population and a lack of roads and other infrastructures. The construction of another such new town is under consideration in the Pan-gyo area. But it is important that Pan-gyo remains a wide green zone. Many studies show that green space can play an important role in improving urban eco-meteorological, ameliorative capability and air hygiene. The objective of this study is to analyze the urban heat islands of Bund-Dang Si which was constructed in 1996 and of the Pan-Gyo area planned as new town. To investigate the local thermal environment and its negative effects caused by change of the land use type and urbanization we used LANDSAT TM images for extraction of urban surface temperature according to change of land use over 15 years. These data were analyzed together with digital land use and topographic data. As a study result, we found that the thermal island of this area from 1985 to 1999 rapidly increased with a difference of mean temperature of more than 12'E. Before construction of Bun-Dang Si the temperature of this area was the same as the forest, but during the new town construction in 1991, an urban heat island developed. The temperature of forest with a size of over 50% of the investigation area was lowest, which leads us to conclude that the forest cools the urban and its surroundings. The mean temperature of the residential and commercial area is more than +4.5$^{\circ}C$ higher then forest, so this method of land use is the main factor increasing the urban heat island. Urban heat islands and green space play an important role in urban wind systems, i.e. Thermal Induced Air Exchange and Structural Wind Circulation, because of their special properties with regard to energy balance between constructed urban and land. The skill to allocate land use types in urban areas is a very important planning device to reduce air pollution and induce the fresh cold air from green space. An urban climatic experiment featuring a numerical wind simulation study to show the air corridor will be published in a following research paper.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.19-26
• /
• 2008

This paper is related to a new technology allowing a user to have a 360 degree viewpoint of the virtual wearing object, and to an object VR(Virtual Reality)-based 2D virtual textile wearing system using viewpoint vector estimation and textile texture mapping. The proposed system is characterized as capable of virtually wearing a new textile pattern selected by the user to the clothing shape section segmented from multiview 2D images of clothes model for object VR, and three-dimensionally viewing its virtual wearing appearance at a 360 degree viewpoint of the object. Regardless of color or intensity of model clothes, the proposed system is possible to virtually change the textile pattern with holding the illumination and shading properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple textile pattern combinations for individual styles or entire outfits. The proposed system can provide higher practicality and easy-to-use interface, as it makes real-time processing possible in various digital environment, and creates comparatively natural and realistic virtual wearing styles, and also makes semi -automatic processing possible to reduce the manual works to a minimum. According to the proposed system, it can motivate the creative activity of the designers with simulation results on the effect of textile pattern design on the appearance of clothes without manufacturing physical clothes and, as it can help the purchasers for decision-making with them, promote B2B or B2C e-commerce.

• Journal of the Korean earth science society
• /
• v.35 no.4
• /
• pp.249-258
• /
• 2014

Despite the greenhouse gases like carbon dioxide have steadily increased in atmosphere, the overall trend of the global average surface air temperature has stalled during the last decade (2002-present). This phenomenon is often called hiatus or warming pause, which is challenging the prevailing view that anthropogenic forcing causes warming environment. Our study characterized the hiatus by analyzing the HadGEM2-AO (95 yrs) simulation data based on RCP8.5 scenario. The PC2 time series from the EOF of the zonal mean vertical ocean temperature has been defined as the index that represents the warming pause. The relationship between the hiatus, ENSO and the changes in climate system are identified by utilizing the newly defined PC2. Since the La Nina index (defined as the negative of NINO3 index) leads PC2 by about 11 months, it may be possible that the La Nina causes the warming to be interrupted. We also show that the cooling of the climate system closed tied to the heat penetration into the deep ocean, indicating the weakening the warming rate is due to the oceanic heat uptake. Finally, the global warming hiatus is characterized by the anomalous warming in Arctic region as well as the intensification of the trade wind in the equatorial Pacific.

• Journal of Environmental Policy
• /
• v.7 no.2
• /
• pp.1-32
• /
• 2008

This study examined the income distribution effect of the environmental taxes in the energy sector by applying the Urban Family Survey and the Household Income and Expenditure Survey to the Kakwani index. The results analyzed are as follows: first, taxes of the non-transportation energy sector show progressive tax schemes, while those of transportation energy show regressive ones. Second, we calculated the scenario-specific progressivity index on basis of the existing energy price structure. Contrary to the previous works claimed to be regressive, the progressivity in scenario I got higher than before, except for the congestion taxes. Also, the index by the total sum of taxes in scenario II showed just a little bit higher progressive tax system. In scenario III, both the value added tax and the total sum of taxes have a little regressive structure, but the indexes in the environmental taxes, heat capacity taxes, and those which the environmental tax and the congestion tax and heat capacity taxes are summed up, are in general progressive. Third, subsidizing the tax revenues raised from the environmental taxes to the poor classes by a simulation approach shows more progressive as expected, implying the more subsidy the higher the progressivity index. As a result, it is said that the implementation of the environmental taxes has no negative impact on the income distribution, and the subsidy of the tax revenue raised from it to the poor can make the income inequality improve.

• Journal of Environmental Policy
• /
• v.12 no.4
• /
• pp.71-92
• /
• 2013

Unlike general public investment projects, when it comes to environmental public investment projects, there is a gap between those who pay the costs, and those who receive the benefits. This is because of the long term nature of environmental investments, which entails that the majority of the costs are paid by the current generation, while the benefits are reaped by future generations. Because of this, when the social discount rate is set at a standard, singular rate, an issue of relative underestimation of the benefits reaped by future generations may occur during the analytic process. This paper begins with the recognition of this problem, and attempts to estimate a suitable social discount rate that can be applied to environmental investment projects. Taking into account recent economic situations, the social discount rate is currently being estimated at between 2.9 ~ 4.9%. Also, this paper used preliminary feasibility studies that took place so far, to analyze the standard pattern of benefit generation. This revealed that alterations in social discount rates can bring significant changes in economic feasibility test results. Simulation results showed that roughly 6% of B/C ratios could be increased by 1%p. resulting in a decrease in social discount rates. Also if we use hyperbolic discount rates, instead of using the current singular rate, there would be a meaningful increase in the benefits for the future generation.

• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.576-587
• /
• 2020

Objectives: This study calculated local residents exposures to VOCs (Volatile Organic Compounds) released into the atmosphere using the CalTOX model and carried out uncertainty analysis and sensitivity analysis. The model validity was analyzed by comparing the predicted and the actual atmospheric concentrations. Methods: Uncertainty was parsed by conducting a Monte Carlo simulation. Sensitivity was dissected with the regression (coefficients) method. The model validity was analyzed by applying r² (coefficient of determination), RMSE (root mean square error), and the Nash-Sutcliffe EI (efficiency index) formula. Results: Among the concentrations in the atmosphere in this study, benzene was the highest and the lifetime average daily dose of benzene and the average daily dose of xylene were high. In terms of the sensitivity analysis outcome, the source term to air, exposure time, indoors resting (ETri), exposure time, outdoors at home (ETao), yearly average wind speed (v_w), contaminated area in ㎡ (Area), active breathing rate (BRa), resting breathing rate (BRr), exposure time, and active indoors (ETai) were elicited as input variables having great influence upon this model. In consequence of inspecting the validity of the model, r² appeared to be a value close to 1 and RMSE appeared to be a value close to 0, but EI indicated unacceptable model efficiency. To supplement this value, the regression formula was derived for benzene with y=0.002+15.48x, ethylbenzene with y ≡ 0.001+57.240x, styrene with y=0.000+42.249x, toluene with y=0.004+91.588x, and xylene with y=0.000+0.007x. Conclusions: In consequence of inspecting the validity of the model, r² appeared to be a value close to 1 and RMSE appeared to be a value close to 0, but EI indicated unacceptable model efficiency. This will be able to be used as base data for securing the accuracy and reliability of the model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.343-350
• /
• 2012

A planar solid oxide fuel cell (PSOFC) is studied in its application in a high-temperature stationary power plant. Even though PSOFCs with external reformers are designed for application from the distributed power source to the central power plant, such PSOFCs may sacrifice more system efficiency than internally reformed SOFCs. In this study, modeling of the PSOFC with an external reformer was developed to analyze the feasibility of thermal energy utilization for the external reformer. The PSOFC system model includes the stack, reformer, burner, heat exchanger, blower, pump, PID controller, 3-way valve, reactor, mixer, and steam separator. The model was developed under the Matlab/Simulink environment with Thermolib$^{(R)}$ modules. The model was used to study the system performance according to its configuration. Three configurations of the SOFC system were selected for the comparison of the system performance. The system configuration considered the cathode recirculation, thermal sources for the external reformer, heat-up of operating gases, and condensate anode off-gas for the enhancement of the fuel concentration. The simulation results show that the magnitude of the electric efficiency of the PSOFC system for Case 2 is 12.13% higher than that for Case 1 (reference case), and the thermal efficiency of the PSOFC system for Case 3 is 76.12%, which is the highest of all the cases investigated.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.21-29
• /
• 2017

Variations in matric suction were compared between field measurements and numerical analysis for a tailings dump slope. We performed an analysis of slope stability using precipitation records measured in the field, selecting the period (72 hours) of highest rainfall intensity during the field monitoring, for which the matric suction and rainfall records measured in the field were analyzed. In addition, we applied the precipitation records of this period to the numerical analysis. SEEP/W and SLOPE/W were used to analyze the seepage flow in the slope due to rainfall and to investigate the slope stability considering the wetting front depth from the ground surface, respectively. The seepage analysis, using SEEP/W, was carried out on the rainfall data obtained in the field. Comparisons between the field monitoring data and simulation results for matric suction show some quantitative difference but similar patterns of temporal variation. According to the results of slope stability analysis using SLOPE/W and the results of seepage analysis, the safety factor of the slope showed a sudden increase at the point of rapid increase in rainfall intensity. It then recovered because subsequent rainfall was scarce. Therefore, the stability of the tailings dump slope can be reasonably estimated if seepage and slope stability analyses, based on precipitation records, have been carried out.