• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.275-275
• /
• 2000

This paper designs a digital correlator for the integrated GPS/GLONASS receiver consisting of DCO, carrier cycle counter, code generator, code phase counter, mixer, epoch counter, accumulator. It is designed using Verilog-HDL(Verilog-Hardware Description Language) and synthesized using EDA(Electronic Design Automation) tools. The performance of the designed digital correlator is verified by the functional simulation and real satellite tracking experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.44.1-44
• /
• 2001

This paper discusses the interacting mobile robots for tele-operation system using the world wide web. In multi-agent and web-based teleoperation environment the problem of communication delay must be solved for the efficient and robust control of the system. The standard graphic user interface(GUI)is implemented using Java Programing language. The web browser is used to integrate the virtual environment and the standard GUI(Java applet) in a single user interface. Users can access a dedicated WWWserver and download the user interface. Reinforcement learning is applied to indirect control in order to autonomously operate without the need of human intervention. Java application has been developed to communicate and control multi robots using WWW. The effectiveness of our multi robots system is verified by simulation and experiments ...

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1099-1101
• /
• 2000

ASIC chip design for motor control has been a subject of increasing interest since an effective methodology of system-on-a-chip design was developed. This paper investigates the design and implementation of ASIC chip for vector control of induction motor using VHDL which is a standard hardware description language. The vector control algorithm is finally implemented using a simple electronic circuit based on FPGA. The performance of the designed ASIC is verified through simulation and experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.260-264
• /
• 1998

In this paper, we implemented the neuro-computer called MY-NEUPOWER in our research to carry out the artificial neural networks (ANN) calculating. An application software was developed based on a neural network using back-propagation (BP) algorithm under the UNIX platform by the specified computer language named MYPARAL. This neural network model was used as an auxiliary controller in the temperature control of sinter cooler system in steel plant which is a nonlinear system. The neural controller was trained off-line using the real input-output data as training pairs. We also made the system description of adaptive neural controller on the same temperature control system. We will carry out the whole system simulation to verify the suitability of neural controller in improving the system features.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1940-1942
• /
• 2001

Magnetic Levitation System(MLS) levitates a steel ball to the desired position in the gravity field using electromagnetic force. MLS consists of light sensor to measure the position of steel ball and an electromagnet to control the position of the ball, that composes a feedback control system. This work does not use a steel ball with constant mass but variable mass steel balls as magnetic levitation targets. Differential equation of electric circuit for electromagnet and motion equation of the movement of steel ball are derived for modeling nonlinear system, that will be linearized at the nominal operating point. We propose a digital control that can levitate a steel ball of which weight is not known for ED-4810 system. Algorithm for estimating ball weight and feedback control are implemented in digital scheme under pentium PC equiped with A/D and D/A converter, ACL-8112, using C-language. Simulation and experimental results are given to show the usefulness of the proposed controller.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.245-254
• /
• 2023

Through qualitative analysis and quantitative analysis, the contradictory conclusions about the stability of the settled goaf with two-layer coal seams subject to building load were obtained. Therefore, it is necessary to combine the additional stress method and numerical simulation to further analyze the foundation stability. Through borehole analysis and empirical formula analogy, the height of water-conducting fracture zone in No.4 coal and No.9 coal were obtained, providing the calculation range of water-conducting fracture zone for numerical simulation. To ensure the accuracy of the elastic modulus of broken gangue, the stress-strain curve were obtained by broken gangue compression test in dried state of No.4 coal seam and in soaking state of No.9 coal seam. To ensure the rationality of the numerical simulation results, the actual measured subsidence data were retrieved by numerical simulation. FISH language was used to analyze the maximum building load on the surface and determine the influence depth of building load on the foundation. The critical building load was 0.16 MPa of No.4 settled goaf and was 1.6 MPa of No.9 settled goaf. The additional stress affected the water-conducting fracture zone obviously, resulted in the subsidence of water-conducting fracture zone was greater than that of bending subsidence zone. In this paper, the additional stress method was analyzed by numerical simulation method, which can provide a new analysis method for the treatment and utilization of the settled goaf.

• Educational Technology International
• /
• v.16 no.2
• /
• pp.141-166
• /
• 2015

The purpose of this study was to examine the effects of using visual stimulation and gesture, namely embodied language learning, on learning achievement and learner's course interest in the EFL classroom. To investigate the effectiveness of the proposed purpose, thirty two third-grade elementary school students participated and were assigned into four English learning class conditions (i.e., using animated graphic and gestures condition, using only animated graphic condition, using still pictures and gesture condition, and control condition). The research questions for this study are addressed below: (1) What differences are there in post and delayed learning achievement between imitating gesture group and non-imitating one and between animated graphic group and still picture one? (2) What differences are there in course interest between imitating gesture group and non-imitating one and between animated graphic group and still picture one? The Embodiment-based English learning system for this study was designed by using Microsoft's Kinect sensing devices. The results of this study revealed that students of imitating gesture group memorized and retained better words and sentence structure than those of the other groups. As for learner's course interest measurement, imitating gesture group showed a highly positive response to attention, relevance, and satisfaction for curriculum and using animated graphic influenced satisfaction as well. This finding can be attributed to the embodied cognition, which proposes that the body and the mind are inseparable in the constitution of cognition and thus students using visual simulation and imitating related gesture regard the embodied language learning approach more satisfactory and acceptable than the conventional ones.

• Journal of Biosystems Engineering
• /
• v.18 no.4
• /
• pp.328-343
• /
• 1993

To control depth of tractor implement, an automatic depth control system based upon microcomputer was developed. This system consists of data aquisition system to measure and to record travel speed, draft and depth of the implement, hydraulic system to control the implement depth and 3-point hitch to attach the implement. Program, written in C language, was able to select position control, draft control and mixed control. To analyze parameters affecting this system, the performance of the system was evaluated through use of computer simulation and verified in soil bin experiments. 3-point hitch was lifted by hydraulic pressure and lowered by implement weight. Dead band was one of the important factors which affect the stability and the accuracy of the system. The system became unstable when the flow rate was increased or when the dead band was decreased. The position control mode with on-off control showed the great ability to control the implement at the given plowing depth. With the draft control, the tractor load could be reduced, however the plowing depth was changed unexpectedly when the soil was hard and inconsistent. The mixed control could improve the performance of the system to maintain the plowing depth without overload of the tractor.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1012-1016
• /
• 2004

In this paper, we propose a simple but optimized NC code generating technique for disk cams by means of tool path error control in a five-axis CNC machining center. Using the geometric theorem of the triangle made between manufacturing points and error checkpoint, the tool path error has been studied for disk cams profile generation and an improvement in the profile has been obtained. Then, based on the present manufacturing approach a computer program is developed on $C^{++}$ language to perform and to verify the shape design, the manufacturing simulation, and the optimized generation of the NC code.

• 전자공학회논문지 IE
• /
• v.45 no.3
• /
• pp.36-41
• /
• 2008

By considering decoupling between loops as a kind of measurable disturbance, a steady-state decoupling method based on feedforward compensation is proposed for a three-tank liquid level system often encountered in practical process control. In addition, the three-tank liquid level system's dynamic model with structure of two-input and two-output is presented according to its working principle. Finally simulation experiments given in C++Builder language demonstrate the effectiveness of the proposed method.