• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.51-63
• /
• 2002

This paper presents a hybrid control strategy for seismic protection of a benchmark cable-stayed bridge, which is provided as a testbed structure for the development of strategies for the control of cable-stayed bridges. This benchmark problem considers the cable-stayed bridge that is scheduled for completion in Cape Girardeau, Missouri, USA in 2003. Seismic considerations were strongly considered in the design of this bridge due to the location of the bridge in the New Madrid seismic zone and its critical role as a principal crossing of the Mississippi river. Based on detailed drawings of this cable-stayed bridge, a three-dimensional linearlized evaluation model has been developed to represent the complex behavior of the bridge. A set of eighteen evaluation criteria has been developed to evaluate the capabilities of each control strategy. In this study, a hybrid control system is composed of a passive control system to reduce the earthquake-induced forces in the structure and an active control system to further reduce the bridge responses, especially deck displacements. Conventional base isolation devices such as lead rubber bearings are used for the passive control design and Bouc-Wen model is used to simulate the nonlinear behavior of these devices For the active control design, ideal hydraulic actuators are used and on $H_2$/LQG control algorithm is adopted. Numerical simulation results show that the performance of the proposed hybrid control strategy is quite effective compared to that of the passive control strategy and slightly better than that of the active control strategy. The hybrid control method is also more reliable than the fully active control method due to the passive control part. Therefore, the proposed hybrid control strategy can effectively be used to seismically excited cable-stayed bridges.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.743-750
• /
• 2008

Recently Bridges crossing waterway are constructed in navigable waterway, so marine accidents near bridges navigable waterway often occurred bemuse that has affect dangerous element for. This paper analysed the necessary environmental factors to navigate safely near bridges and how to set up the environmental factors. Marine accidents elements occurred near bridges relate to span of bridge, size of navigating ship, length of straight way and traffic volume except mistake of mariners. As results of marine accident parameter analysis, Span of bridge is necessary more than 300m at least based on marine accident's analysis, and in case of more than ship's Length 150m, span of bridge is necessary more than 500m, $3{\sim}4L$(L; Ship's Length). Length of straight way before bridge is necessary more than 8L to minimize the marine accident.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.117-128
• /
• 2002

Virtual LAN (VLAN) is an architecture to enable communication between end stations as if they were on the same LAN regardless of their physical locations. VLAN defines a limited broadcast domain to reduce the bandwidth waste. The Newbridge Inc. developed a layer 3 VLAN product called VIVID, which configures a VLAN based on W subnet addresses. In a VIVID system, a single route server is deployed for address resolution, VLAN configuration, and data broadcasting to a VLAN. If the size of the network, over which the VLANS supported by the VIVID system spans, becomes larger, this single route server could become a bottleneck point of the system performance. One possible approach to cope with this problem is to deploy multiple route servers. We propose two architectures, organic and independent, to expand the original VIVID system to deploy multiple route servers. A course of simulations are done to analyze the performance of each architecture that we propose. The simulation results show that the performances of the proposed architectures depend on the lengths of VLAN broadcasting sessions and the number of broadcast data frames generated by a session. It has also been shown that there are tradeoffs between the scalability of the architecture and their efficiency in data transmissions.

• Journal of KIISE:Information Networking
• /
• v.27 no.3
• /
• pp.301-314
• /
• 2000

As the number of World Wide Web (Web) users grows, Web traffic continues to increase at an exponential rate. Currently, Web traffic is one of the major components of Internet traffic. Also, high bandwodth usage due to Web traffic is observed during peak periods while leaving bandwidth usage idle during off-peak periods. One of the solutions to reduce Web traffic and speed up Web access is through the use of Web caching. Unfortunately, Web caching has limitations for reducing network bandwidth usage during peak periods. In this paper, we focus our attention on the use of a prefetching algorithm for reducing bandwidth during peak periods by using off-peak period bandwidth. We propose a statistical, batch, proxy-side prefetching scheme that improves cache hit rate while only requiring a small amount of storage. Web objects that were accessed many times in previous 24 hours but would be expired in the next 24 hours, are selected and prefetched in our scheme. We present simulation results based on Web proxy and show that this prefetching algorithm can reduce peak time bandwidth using off-peak bandwidth.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.156-169
• /
• 2015

This study was to evaluate the RCP climate change impact on hydrological components in the Imha-Dam watershed using SWAT(Soil and Water Assessment Tool) Model. The model was calibrated for six year(2002~2007) and validated for six year(2008~2013) using daily observed streamflow data at three watershed stations. The overall simulation results for the total released volume at this point appear reasonable by showing that coefficient of determination($R^2$) were 0.70~0.85 and Nash-Sutcliffe model efficiency(NSE) were 0.67-0.82 for streamflow, respectively. For future hydrologic evaluation, the HadGEM3-RA climate data by scenarios of Representative Concentration Pathway(RCP) 4.5 and 8.5 of the Korea Meteorological Administration were adopted. The biased future data were corrected using 34 years(1980~2013, baseline period) of weather data. Precipitation and temperature showed increase of 10.8% and 4.9%, respectively based on the baseline data. The impacts of future climate change on the evapotranspiration, soil moisture, surface runoff, lateral flow, return flow and streamflow showed changes of +11.2%, +1.9%, +10.0%, +12.1%, +18.2%, and +11.2%, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.45-55
• /
• 2009

This study was intended to increase efficiency of traffic flow management on intersection. The result suggested to establish a left-turn at own risk lane to increase efficiency of traffic flow on intersection. The scope of the research was to investigate the geometric structure of a signal-controlled intersection, traffic volume(density) with respect to directions and traffic signal display, and to select a signalling intersection into which a car waiting for a traffic signal enters by adjusting the display sequence of traffic signal. The delay with respect to directions and for the whole intersection was compared for the current situation and an improvement plan. Using TSIS, a traffic analysis package, the traffic situation on an intersection was investigated. Based on the simulation result for Seok-Jeon intersection in Ma-San selected from the field investigation of intersections to which an improvement plans would be applicable, the waiting time in the direction without a entering traffic signal was decreased to be 78.6 seconds per car and that of the direction expecting the increase of waiting time was increased by 4 seconds per car only. It was confirmed that the waiting time for the whole intersection was improved.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.12-19
• /
• 2014

A signal plan focused on vehicle traffic could easily overlook vulnerable priority signals, although the importance of vulnerable movements is increasingly recognized in recent years. Especially, the vulnerable are sometimes faced with dangerous situations when crossing roads with a signal plan based on design values of average, non-vulnerable persons. This study is focused on how to minimize the vehicle delay while simultaneously considering traffic flow and providing traffic safety by increasing road crossing time for pedestrians. For this purpose, a priority signal control strategy for the vulnerable, considering vehicle traffic flow, has been tested. Practical implication and a microscopic computer simulation has shown that the proposed method could provide a small decrease (about 6.2%) in pedestrian delay, a small increase (about 8.5~13.3%) in travel speed of passing traffic, and a considerable decrease (16.2~26.9%) in vehicle travel time. These findings suggest that the proposed signal control strategy could increase pedestrian safety and diminish delay of vehicle travel.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.114-123
• /
• 2016

The effective feature extraction method for unmanned aerial vehicle (UAV) detection is proposed and verified in this paper. The UAV engine sound is harmonic complex tone whose frequency ratio is integer and its variation is continuous in time. Using these characteristic, we propose the feature vector composed of a mean and standard deviation of difference value between fundamental frequency with 1st overtone as well as mean variation of their frequency. It was revealed by simulation that the suggested feature vector has excellent discrimination in target signal identification from various interfering signals including frequency variation with time. By comparing Fisher scores, three features based on frequency show outstanding discrimination of measured UAV signals with low signal to noise ratio (SNR). Detection performance with simulated interference signal is compared by MFCC by using ELM classifier and the suggested feature vector shows 37.6% of performance improvement As the SNR increases with time, the proposed feature can detect the target signal ahead of MFCC that needs 4.5 dB higher signal power to detect the target.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.66-76
• /
• 2009

The motion estimation in video encoding system occupies the biggest part. So, we require the motion estimator with efficient structure for real-time operation. And for motion estimator's implementation, it is desired to design hardware module of an exclusive use that perform the encoding process at high speed. This paper proposes motion estimation detection block(MED), 41 SADs(Sum of Absolute Difference) calculation block, minimum SAD calculation and motion vector generation block based on parallel processing. The parallel processing can reduce effectively the amount of the operation. The minimum SAD calculation and MED block uses the pre-computation technique for reducing switching activity of the input signal. It results in high-speed operation. The MED and 41 SADs calculation blocks are composed of adder tree which causes the problem of critical path. So, the structure of adder tree has changed the most commonly used ripple carry adder(RCA) with carry skip adder(CSA). It enables adder tree to operate at high speed. In addition, as we enabled to easily control key variables such as control signal of search range from the outside, the efficiency of hardware structure increased. Simulation and FPGA verification results show that the delay of MED block generating the critical path at the motion estimator is reduced about 19.89% than the conventional strukcture.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.227-238
• /
• 1999

In advance of launch, simulated radiances of the Ocean Scanning Multispectral Imager (OSMI) will be very useful to guess the real imagery of OSMI and to prepare for data processing of OSMI. The data processing system for OSMI which is one of sensors aboard Korea Multi-Purpose Satellite (KOMPSAT) scheduled for launch in 1999 is developed based on the SeaWiFS Data Analysis System (SeaDAS). Simulation of radiances requires information on the spectral band, orbital and scanning characteristics of the OSMI and KOMPSAT spacecraft. This paper also describes a method to create simulated radiances of the OSMI over the oceans. Our method for constructing a simulated OSMI imagery is to propagate a KOMPSAT orbit over a field of Coastal Zone Color Scanner (CZCS) pigment concentrations and to use the values and atmospheric components for calculation of total radiances. A modified Brouwer-Lyddane model with drag was used for the realistic orbit prediction, the CZCS pigment concentrations were used to compute water-leaving radiances, and a variety of radiative transfer models were used to calculate atmospheric contributions to total radiances detected by OSMI. Imagery of the simulated OSMI radiances for 412, 443, 490, 555, 765, 865nm was obtained. As expected, water-leaving radiances were only a small fraction (below 10%) of total radiances and sun glint contaminations were observed near the solar declination. Therefore, atmospheric correction is critical in the calculation of pigment concentration from total radiances. Because the imagery near the sun's glitter pattern is virtually useless and must be discarded, more advanced data collection planning will be required to succeed in the mission of OSMI which is consistent monitoring of global oceans during three year mission lifetime.