• 한국분말재료학회지
• /
• 제15권2호
• /
• pp.87-94
• /
• 2008

In order to investigate a nitriding process of spent oxide fuel and the subsequent change in thermal properties after nitriding, simulated spent fuel powder was converted into a nitride pellet with simulated fission product elements through a carbothermic reduction process. Nitriding rate of simulated spent fuel was decreased with increasing of the amount of fission products. Contents of Ba and Sr in simulated spent fuel were decreased after the carbothermic reduction process. The thermal conductivity of the nitride pellet was decreased by an addition of fission product element but was higher than that of the oxide fuel containing fission product elements.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1300-1309
• /
• 2023

Simulated debris was synthesized using UO₂, Zr, and stainless steel and a heat treatment method under inert or oxidizing conditions. The primary U solid phase of the debris synthesized at 1473 K under inert conditions was UO₂, whereas a (U, Zr)O₂ solid solution formed at 1873 K. Under oxidizing conditions, a mixture of U₃O₈ and (Fe, Cr)UO₄ phases formed at 1473 K, whereas a (U, Zr)O_2+x solid solution formed at 1873 K. The leaching behavior of the fission products from the simulated debris was evaluated using two methods: the irradiation method, for which fission products were produced via neutron irradiation, and the doping method, for which trace amounts of non-radioactive elements were doped into the debris. The dissolution behavior of U depended on the properties of the debris and aqueous solution for immersion. Cs, Sr, and Ba leached out regardless of the primary solid phases. The leaching of high-valence Eu and Ru ions was suppressed, possibly owing to their solid-solution reaction with or incorporation into the uranium compounds of the simulated debris.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.727-732
• /
• 2016

A simple and rapid spectrophotometric method has been developed to enable the determination of plutonium concentration in an irradiated fuel solution in the presence of all fission products. An excess of ceric ammonium nitrate solution was employed to oxidize all the valence states of plutonium to +6 oxidation state. Interference due to the presence of fission products such as ruthenium and zirconium, and corrosion products such as iron in the envisaged concentration range, as in the irradiated fuel solution, was studied in the determination of plutonium concentration by the direct spectrophotometric method. The stability of plutonium in +6 oxidation state was monitored under experimental conditions as a function of time. Results obtained are reproducible, and this method is applicable to radioactive samples resulting before the solvent extraction process during the reprocessing of fast reactor spent fuel. An analysis of the concentration of plutonium shows a relative standard deviation of <1.2% in standard as well as in simulated conditions. This reflects the fast reactor fuel composition with respect to uranium, plutonium, fission products such as ruthenium and zirconium, and corrosion products such as iron.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.729-738
• /
• 2009

Given the evolution of High-Temperature Gas-cooled Reactor(HTGR) designs, the source terms for licensing must be developed. There are three potential source terms: fission products, actinides in the fuel and tritium in the coolant. It is necessary to provide first an inventory of the source terms under normal operations. An analysis of source terms has yet to be performed for HTGRs. The previous code, which can estimate the inventory of the source terms for LWRs, cannot be used for HTGRs because the general data of a typical neutron cross-section and flux has not been developed. Thus, this paper uses a combination of the MCNP, ORIGEN, and MONTETEBURNS codes for an estimation of the source terms. A method in which the HTR-10 core is constructed using the unit lattice of a body-centered cubic is developed for core modeling. Based on this modeling method by MCNP, the generation of fission products, actinides and tritium with an increase in the burnup ratio is simulated. The model developed by MCNP appears feasible through a comparison with models developed in previous studies. Continuous fuel management is divided into five periods for the feeding and discharging of fuel pebbles. This discrete fuel management scheme is employed using the MONTEBURNS code. Finally, the work is investigated for 22 isotope fission products of nuclides, 22 actinides in the core, and tritium in the coolant. The activities are mainly distributed within the range of $10^{15}{\sim}10^{17}$ Bq in the equilibrium core of HTR-10. The results appear to be highly probable, and they would be informative when the spent fuel of HTGRs is taken into account. The tritium inventory in the primary coolant is also taken into account without a helium purification system. This article can lay a foundation for future work on analyses of source terms as a platform for safety assessment in HTGRs.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.280-281
• /
• 2005

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1799-1804
• /
• 2019

The concept of a new method, the CARBEX (CARBonate EXtraction) process, was proposed for reprocessing of spent uranium oxide fuel. The proposed process is based on use of water solutions of $Na_2CO_3$ or $(NH_4)_2CO_3$ and solvent extraction (SE) by the quaternary ammonium compounds for selective recovery and purification of U from the fission products (FPs). Applying of SE allows to reach high degree of purification of U from FPs. Carrying out the processes in poorly aggressive alkaline carbonate media leads to increasing safety of SNF's reprocessing and better selectivity of separation of lanthanides and actinides. Moreover carbonate reprocessing media allows to carry out a recycling and regeneration of reagents. We have been done laboratory scale experiments on the extraction components of simulated voloxidated spent fuel in the solutions of NaOH or $Na_2CO_3-H_2O_2$ and recovery of U from carbonate solutions by SE method using carbonate of methyltrioctylammonium in toluene. It was shown that the purification factors of U from impurities of simulated FPs reached values $10^3-10^5$. The received results support our opinion that CARBEX after the further development can become more safe, simple and profitable method of spent fuel reprocessing.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.975-981
• /
• 2016

The containment response during the first 24 hours of a low-pressure severe accident scenario in a nuclear power plant with a two-loop Westinghouse-type pressurized water reactor was simulated with the CONTAIN 2.0 computer code. The accident considered in this study is a large-break loss-of-coolant accident, which is not successfully mitigated by the action of safety systems. The analysis includes pressure and temperature responses, as well as investigation into the influence of spray on the retention of fission products and the prevention of hydrogen combustion in the containment.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.435-441
• /
• 2014

Silicon carbide-based ceramics and their composites have been studied for application to fusion and advanced fission energy systems. For fission reactors, $SiC_f$/SiC composites can be applied to core structural materials. Multilayered SiC composite fuel cladding, owing to its superior high temperature strength and low hydrogen generation under severe accident conditions, is a candidate for the replacement of zirconium alloy cladding. The SiC composite cladding has to retain its mechanical properties and original structure under the inner pressure caused by fission products; as such it can be applied as a cladding in fission reactor. A hoop strength test using an expandable polyurethane plug was designed in order to evaluate the mechanical properties of the fuel cladding. In this paper, a hoop strength test of the multilayered SiC composite tube for nuclear fuel cladding was simulated using FEA. The stress caused by the plug was distributed nonuniformly because of the friction coefficient difference between the inner surface of the tube and the plug. Hoop stress and shear stress at the tube was evaluated and the relationship between the concentrated stress at the inner layer of the tube and the fracture behavior of the tube was investigated.

• 분석과학
• /
• 제16권2호
• /
• pp.117-124
• /
• 2003

고온 건식공정의 사용후핵연료 산화분말 ($U_3O_8$)과 경 중수로 연계 핵연료 제조공정의 $UO_2$ 소결체 물성 이해에 필요한 Oxygen/Metal 비를 습식 및 건식 분석방법으로 측정하였다. $UO_2$ 분말에 핵분열생성물 원소의 산화물을 일정량 첨가하고 $1,700^{\circ}C$의 수소분위기에서 소결시켜 20,000~60,000 MWd/MtU 연소도 범위의 사용후핵연료와 화학조성이 유사한 모의 사용후핵연료를 제조하였다. 습식법에 의한 O/M 비 측정을 위하여 혼합산 (10 M HCl : 8 M $HNO_3$, 2.5:1 V/V)에 의한 가압산분해법으로 모의 사용후핵연료를 용해하고 우라늄과 핵분열생성물 원소를 추출 크로마토그래피로 분리한 후 금속원소의 총량을 유도결합플라스마 원자방출분광분석법으로 결정하였다. 또한 $UO_2$가 산화될 때의 무게변화를 열중량 무게분석법 (thermogravimetric)으로 측정하여 O/M비를 계산하고 습식법으로 얻은 결과와 비교하였다. $Mo_{0.4}-Ru_{0.4}-Rh_{0.1}-Pd_{0.1}$ 합금이 O/M비 측정에 미치는 영향을 조사하였다.

• 방사성폐기물학회지
• /
• 제7권2호
• /
• pp.93-100
• /
• 2009

본 연구는 12 성분의 모의 FP-산화물 (simulated fission products oxide)을 대상으로 하여 $(NH_4)_2CO_3-H_2O_2$ 탄산염 용액에서 U을 산화 용해할 때 U과 함께 용해되는 FP의 산화 용해특성을 규명하였다. FP-산화물의 산화용해 시 FP의 최소 용해를 위한 산화제로는 $H_2O_2$가 가장 우수하였다. 0.5 M $(NH_4)_2CO_3-0.5$ M $H_2O_2$ 계에서 U과 함께 산화 용해되는 원소로는 Re, Te, Cs, Mo 등이고, 2시간 용해에서 Re과 Te은 각각 98${\pm}$2%, Cs은 94${\pm}$2%, Mo는 29${\pm}$2%가 용해되었다. Re, Te 및 Cs의 용해는 각각 $(NH_4)_2CO_3$ 용액에서의 높은 용해도에 기인하여 $H_2O_2$ 함유 여부에 관계없이 매우 빠르게 일어나고, $(NH_4)_2CO_3$ 농도 및 $H_2O_2$의 농도증가에 거의 영향을 받지 않았다. 반면에 $H_2O_2$에 의한 Mo의 산화 용해는 $(NH_4)_2CO_3$ 농도에 무관하게 매우 느리게 일어나고, 4시간 용해에서 약 33%가 용해되었다. 그리고 용액 내 pH는 FP-산화물의 용해에 가장 큰 영향을 미치는 요인으로 U의 산화 용해 시 FP의 공용해를 방지하기 위해서 pH 9${\sim}$10에서 수행하는 것이 효과적이었다.