• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.523-526
• /
• 2002

벽식구조 골조공사에서 거푸집공사는 원가에 지배적 비율을 점하고 RC 구조체의 중심공법으로 활용되고 있기 때문에 체계적이고 효율적인 공법개선이 요구된다. 이에 본 논문은 거푸집공사의 품질 및 생산성향상을 위한 공법개선을 목적으로 한다. 과학적인 분석기법을 통한 기존 벽식구조 거푸집공사의 문제점을 개선하고자 생산성 분석기법인 워크 샘플링을 활용하였다. 개선안을 도출하기 위한 방법론을 제시하고, 개선방향에 따라 거푸집공사의 품질 및 시공단순화를 위한 유닛화 및 기계화 방안으로 키커폼(kicker form)을 제시하였다. 이는 거푸집공사 수행에 있어 불필요한 작업프로세스를 줄이고 생산성 및 종합적인 시공품질이 향상될 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.147.4-147
• /
• 2001

This work presents the robust controller and the LQG/LTR controller for the stewart platform. To simplify the dynamics we combine equation of the stewart platform and linearized one of hydraulic actuators not considered condensability of the fluid. Through the connection of two dynamic equations we can omit force feedback process of actuators and design controllers for the whole system. We applied two controllers on the stewart platform and show the adequacy controllers through the result of simulation and experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.37-48
• /
• 1984

For the designing propulsion shafting of ship, shaft diameters are usually calculated according to the Society's rules and other scantlings such as a shaft length, coupling and taper parts, etc., are decided according to calculated diameters. And then, the torsional vibration, the lateral vibration and shaft alignment should be reviewed to check whether the resonance points of torsional or lateral vibration appear within the normal operating speed range and the shaft alignment is reasonable. If the results of calculations are unsatisfactory, this process should be repeated until the final condition is determined and the process of this work takes much time to carry out. To simplify the above tedious processes, authors have developed a computer program to fulfill the above design processes at once. This program takes aim at reducing the manual calculating work associated with the propulsion shafting of ship. To confirm the availability of developed computer program, several propulsion shaftings which are driven by diesel engines, have been analysed. The results calculated by authors developed computer program show comparatively good agreements with those of the actual propulsion shafting.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1553-1562
• /
• 2017

For the purpose of enhancing the performance of the shunt active power filter (APF), this paper presents a novel Fast Weighted Compound Control (FWCC) strategy based on the synchronous frame. In this control strategy, the proposed new repetitive controller can work faster and more stably by reducing the internal model cycle and introducing a damping coefficient. In addition, the harmonic detector can be removed to simplify the structure of the APF owing to the improvements. Furthermore, a proportional-integral (PI) controller is added to work in parallel with the repetitive controller by using a weighted ratio. Then, a convergence speed analysis and design algorithm are given in detail. Simulation and experimental results show that the harmonic distortion is reduced from 2.91% to 1.89%. In addition, the content for each of the characteristic harmonic orders has decreased by more than three times.

• Journal of information and communication convergence engineering
• /
• 제20권1호
• /
• pp.41-48
• /
• 2022

With the development of technology, the procedures for making systems are altered. Jobs that were initially difficult with technology have become easier. Likewise with work as a developer. In this era, it takes work that can be done quickly, precisely, and accurately. Inspired by the Copernicus' theory that the sun is the center of the solar system, this research aims to create a plugin that is integrated with the Unity game engine so that it can create dungeons quickly and dynamically using the orbital dungeon generation method. In general, games that have several dungeons are role playing games genre with the roguelike subgenre, where games of this type are widely adopted by well-known games. This method is expected to be employed by developers, especially game developers, to simplify and speed up the creation of games using dungeons, because the complexity of the system that is made can be adjusted according to needs.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1438-1448
• /
• 2019

We present a new technique, called VED (very effective debugging), for detecting and correcting division by zero errors for all types of .NET application. We use applications written in C# because C# applications are distributed through the internet and its executable format is used extensively. A tool called Immunity Debugger is used to reverse engineer executable code to get binaries of source code. With this technique, we demonstrate integer division by zero errors, the location of the error causing assembly language code, as well as error recovery done according to user preference. This technique can be extended to work for other programming languages in addition to C#. VED can work on different platforms such as Linux. This technique is simple to implement and economical because all the software used here are open source. Our aims are to simplify the maintenance process and to reduce the cost of the software development life cycle.

• 대한방사선치료학회지
• /
• 제25권1호
• /
• pp.87-90
• /
• 2013

목 적: CR (computed cadiography) 시스템을 도입함에 따라 치료조사 영상을 인쇄하여 확대율을 변환하는 과정이 생겼다. 이 과정을 단순화하기 위해 자체 제작한 프로그램을 이용한 전산화 방식을 사용해 작업의 효율성을 높이고 업무개선에 기여하고자 한다. 대상 및 방법: 프로그램 제작에 마이크로 소프트 엑셀(ver. 2007)과 Visual Basic (ver. 6.0)을 이용하였다. 각 차폐블럭 마다 환자의 치료정보를 입력하기 위해 입력 창(window)을 디자인 하였다. 디지털 이미지상의 거리를 측정하여 측정된 데이터를 엑셀프로그램에 입력해 확대율을 구하고 차폐블럭 제작을 위한 출력물을 만들었다. 결 과: 이 프로그램을 통해 기존의 방식을 전산화하여 확대율을 쉽게 계산할 수 있고 매크로기능을 사용해 환자치료정보를 출력물에 입력할 수 있다. 그 결과 제작 과정에서 발생할 수 있는 계산상의 오류나 치료 정보가 잘못 전달될 수 있는 오류를 줄일 수 있다. 또한 확대율 변환과정이 단순해지면서 복사기의 필요성이 없어졌고 종이절감 효과도 있었다. 결 론: 블록 제작 과정을 전산화함으로써 기존의 방식을 단순화하여 실무에 적용시켜 업무를 개선했다. 이 프로그램에 사용된 엑셀과 비쥬얼 베이직의 다양한 기능을 적용하면 통계 등 각 병원의 실정에 맞는 다양한 적용 및 개선이 가능할 것으로 사료된다.

• 건축역사연구
• /
• 제10권1호
• /
• pp.41-59
• /
• 2001

This study tries to analyze the influence of IIT's educational system on the Jong Soung Kimm's Architecture. Architect Kimm was the first student in Korea who gained admission to the IIT and was directly learned from Mies van der Rohe. At IIT, he completed a university course from 1956 to 1961, and finished a degree of master under the direction of Professor Myron Goldsmith in 1964. After the graduation, he entered Mies's office and became the professeur of IIT from 1966 to 1978. In consideration with these facts, it is no exaggeration to say that Kimm's architecture was formed by the IIT's educational system and Mies's architectural principles. According to the synopsis of the 5-year curriculum 1944-45, the object of architectural work in IIT is the clarification of : 1)the structure as an architectural factor, its possibilities and limitations 2) space as an architectural problem 3) proportion as a means of architectural expression 4) the expression value of materials 5) the application of these principles by means of free creative work. Architect Kimm's works designed in Korea reflect well these objectives. But Kimm also knew well the problems of IIT's educational system. After the retirement of Mies, IIT's educational system had the tendency to overstress the technology of structure and simplify the complexity of Miesian architectural principles. In opposition to this tendency, architect Kimm continued to keep the spacial and formal subtlety which possess the Mies' original architecture. This shows very well the future direction of Kimm's architectural activities.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.91-98
• /
• 2009

The "3+3 Process" for safety critical software for nuclear power plants' I&C (Instrumentation and Control system) has been developed in this work. The main idea of the "3+3 Process" is both to simplify the software development and safety analysis in three steps to fulfill the requirements of a software safety plan [1]. The "3-Step" software development process consists of formal modeling and simulation, automated code generation and coverage analysis between the model and the generated source codes. The "3-Step" safety analysis consists of HAZOP (hazard and operability analysis), FTA (fault tree analysis), and DV (design validation). Put together, these steps are called the "3+3 Process". This scheme of development and safety analysis minimizes the V&V work while increasing the safety and reliability of the software product. For assessment of this process, validation has been done through prototyping of the SDS (safety shut-down system) #1 for PHWR (Pressurized Heavy Water Reactor).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.178-180
• /
• 2004

In this work, we propose new method of sigma filtering for efficient filtering and preserving edge regions in DCT Domain. In block-based image compression technique, the image is first divided into non-overlapping $8{\times}8$ blocks. Then, the two-dimensional DCT is computed for each $8{\times}8$ block. Once the DCT coefficients are obtained, they are quantized using a specific quantization table. Quantization of the DCT coefficients is a lossy process, and in this step, noise is added. In this work, we combine IDCT matrix and filter matrix to a new matrix to simplify filtering process to remove noise after IDCT in spatial domain, for each $8{\times}8$ DCT coefficient block, we determine whether this block is edge or homogeneous region. If this block is edge region, we divide this $8{\times}8$ block into four $4{\times}4$ sub-blocks, and do filtering process for sub-blocks which is homogeneous region. By this process, we can remove blocking artifacts efficiently preserving edge regions at the same time.