• 대한전기학회논문지:전력기술부문A
• /
• 제48권12호
• /
• pp.1514-1519
• /
• 1999

This paper presents two flexible alternatives to the decoupled load flow(DCL) method. The proposed load flow methods can improve the convergence profiles of the DCL by reflecting in part the effects of the off-diagonal terms in the Jacobian at minimal costs. They can improve the convergence characteristics especially when the power system operating states deviate from the conditions required for stable convergence of the DCL and the P-Q coupling becomes significant. Two algorithms are obtained from the expression of the full Newton-Raphson load flow (NRL) method by successively diminishing the effects of the off-diagonal submatrices in the Jacobian. In the process of simplification, the Neuman series expansion is utilized. Test results show promising performances of the proposed algorithms in their convergence characteristics both in number of iterations and overall convergence speeds. Proposed algorithms are expected to provide flexible alternatives to the NRL when the DCL experiences convergence problems.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.162-166
• /
• 1990

Photoinduced anisotropy (PIA) in amorphous As2S3 (a-As2S3 ) thin film, deposited by vacuum evaporation, is investigated. PIA is induced by linearly polarized Ar+ laser beam (λ=514.5nm) and probed by weak Ar+ laser (λ=514.5nm) and He-Ne laser (λ=632.8nm) beam through the crossed analyzer. Keeping pump beam intensity constantly, rotation of pump beam polarization direction induces reorientation phenomina of anisotropic axis. Introducing directional factor into simplified 3-level system, which is used to analyze photodarkening phenomina, an analytical expression of PIA is derived. Temporal behavior of PIAand its reorientation phenomina are investigated andcompared with theory. In the experiment pump beam intensity is 100mW/$\textrm{cm}^2$ and thickness of a-As2S3 thin film is 3${\mu}{\textrm}{m}$. In those condition, time constant of photoinduced anisotropy obtained by method of least square curve fitting is 4.0$\times$10-2sec-1. The time constant of PIA we obtained is larger than that of photodarkening, 2.8$\times$10-2sec-1.

• Structural Engineering and Mechanics
• /
• 제40권3호
• /
• pp.335-346
• /
• 2011

This paper deals with the bifurcations of non-semi-simple eigenvalues at critical point of Hopf bifurcation to understand the dynamic behavior of the system. By using the Puiseux expansion, the expression of the bifurcation of non-semi-simple eigenvalues and the corresponding topological structure in the parameter space are obtained. The zero-order approximate solutions in the vicinity of the critical points at which the multiple Hopf bifurcation may occur are developed. A numerical example, the flutter problem of an airfoil in simplified model, is given to illustrate the application of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• 제19권1E호
• /
• pp.27-37
• /
• 2000

This paper presents a simplified analytical formulation for computing acoustic power radiation from a rectangular plate exposed to random forces such as turbulent boundary layer pressure fluctuations and arbitrary mechanical force in a subsonic flow field. The expression for the acoustic power is derived using modal expansion method and light fluid loading is assumed on the plate. In order to simplify the formulation for acoustic power due to combined excitations of mechanical forces and turbulent pressures, it is assumed that the structural damping of the plate is small and excitations are broadband random forces having frequency spectra above the convective coincidence. Under these assumptions, an approximate solution for the broadband acoustic power radiation from a plate excited by both turbulent pressures and arbitrary mechanical forces is obtained and evaluated considering the effect of modal coupling on the radiated acoustic power. An efficient method is also suggested to compute modal acoustic impedance in a moving fluid medium by using averaged Green function.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.971-982
• /
• 2015

In order to improve the quality of the billet continuous casting, a two-phase orthogonal power supply (TPOPS) for electromagnetic stirrer is researched, which is composed of three-phase PWM rectifier and three-leg inverter. According to the power analysis of system, the ripple of dc-link voltage is analyzed and its analytical expression is derived. In order to improve the performance of electromagnetic stirring, an integrated control method with feedforward control is proposed for PWM rectifier to suppress the fluctuations of dc-link voltage and provide a stable dc source for inverter. According to the simplified equivalent model, a composite current control method is proposed for inverter. This proposed method can combine the merits of feedforward control with feedback control to effectively improve the dynamic output performance of TPOPS. Finally, a 300kVA prototype of TPOPS is developed, and the results have verified the analysis and control method.

• Journal of Astronomy and Space Sciences
• /
• 제14권2호
• /
• pp.355-366
• /
• 1997

This paper presents a comprehensive analytical approach for determining key maneuver parameters associated with the acquisition and maintenance of the ground track for a low-earth orbit. A livearized model relating changes in the drift rate of the ground track directly to changes in the orbital semi-major axis is also developed. The effect of terrestrial atmospheric drag on the semi-major axis is also explored, being quantified through an analytical expression for the decay rate as a function of density. The non-singular Lagrange planetary equations, further simplified for nearly circular orbits, provide the desired relationships between the corrective in-plane impulsive velocity increments and the corresponding effects on the orbit elements. The resulting solution strategy offers excellent insight into the dynamics affecting the timing, magnitude, and frequency of these maneuvers. Simulations are executed for the ground track acquisition and maintenance maneuver as a pre-flight planning and analysis.

• International journal of advanced smart convergence
• /
• 제7권3호
• /
• pp.37-43
• /
• 2018

Lattice-reduction (LR) techniques have been developed for signal detection in spatial multiplexing multiple input multiple output (MIMO) systems to obtain the largest diversity gain. Thus, an LR-assisted zero-forcing (ZF) receiver can achieve the maximum diversity gain in spatial multiplexing MIMO systems. In this paper, a simplified analysis of the achievable diversity gain is presented by fitting the channel coefficients lattice-reduced by a complex Lenstra-Lenstra-$Lov{\acute{a}}z$ (LLL) algorithm into approximated Gaussian random variables. It will be shown that the maximum diversity gain corresponding to two times the number of receive antennas can be achieved by the LR-based ZF detector. In addition, the approximated bit error rate (BER) expression is also derived. Finally, the analytical BER performance is comparatively studied with the simulated results.

• Structural Engineering and Mechanics
• /
• 제27권1호
• /
• pp.63-75
• /
• 2007

The code provisions on lap splices are critically assessed in the light of 203 beams without transverse reinforcement and 278 beams with transverse reinforcement. For comparison, the provisions given in the ACI 318, Eurocode 2, and TS 500 Codes are considered. The ACI Committee 408 recommended provision and a new proposal are also taken into account throughout the assessment. The comparison with real beam tests where the splice region was subjected to constant moment indicates that current provisions in the Codes do not agree acceptably with test results. The steel stress prediction graphs calculated by means of the Code provisions show high scatter and remain unsafe especially for test data without transverse reinforcement. Both the recent recommended provision by ACI Committee 408 and a new design expression proposed by the author have much less scatter with fewer unsafe predictions. The simplified design provision proposed by ACI Committee 408 does not yield similar results to that of the advanced design provision proposed by the same committee and therefore it could conveniently be replaced with the simpler equation proposed by the author.

• 디자인학연구
• /
• 제16권2호
• /
• pp.323-334
• /
• 2003

본 연구는 디지털 정보환경에 있어 시각화되기 전 단계에 생성되는 주관적인 이미지와 그것을 구체화시키는 객관적인 동적 영상표현에 중점을 두었다. 먼저 시각세계의 확장을 눈의 시각, 뇌의 시각, 카메라의 시각으로 구분하여 서술하였다. 또한 이미지와 영상의 개념을 재정의 하였다. 이미지는 지각상과 심상상의 뜻이 강하게 내포하고 있는 것으로 영상은 끊임없이 변화하는 빛의 정보가 물리적인 프로세스에 의해 생성되고 재현되는 시지 각상이라고 정의하였다. 또한 21세기 영상표현의 특성은 디지털 기술에 의해 실존하는 구체적인 허상에서 정보화된 허상으로, 종합화, 단순화, 집중화되고 있다는 것을 서술하였다. 이것은 영상커뮤니케이션에 있어 근대의 아날로그 환경과 현대의 디지털환경에 의한 표현양식이 각각 본질적으로 차이가 있다는 것을 의미한다. 이와 같이 테크놀러지의 발달과 함께 영상의 정보화는 인간의 감각기능을 확장시켜 가상적공간에서 대리체험을 통한 조형적 리얼리티를 높이고 있다. 한편으로는 인간이 갖고 있는 창조적 능력을 테크놀러지에 의존하는 경향이 동시에 일어나고 있다. 21세기 영상표현은 $\ulcorner$디지털정보환경$\lrcorner$ 에 의한 사이버 공간에 의한 인간 신체 외적 표현에서 내부적 표현으로 영상세계를 우주화, 내면화하는 양면성을 추구하게 될 것이다.

• 만화애니메이션 연구
• /
• 통권31호
• /
• pp.153-176
• /
• 2013

20세기 초 미래주의 화가 중 일부는 2차원 그림에 '속도감'과 '역동성'을 표현하고자 시도하였다. 그림 속 이미지가 움직이는 것처럼 보이도록 하기 위한 속도감과 역동성의 표현은 다양한 시각적 기호로 발전하였다. 이러한 움직임을 나타내는 시각적 기호는 만화에서 중요한 운동표현의 선으로 정착하였다. 세계적으로 인기를 얻은 토리야마 아키라의 <드래곤볼>은 속도감과 역동성이 강조되어 있는 액션장르의 만화로써, 운동표현에 관한 선을 연구하기에 좋은 작품이다. <한국만화영상진흥원>의 용어사전과 <만화 애니메이션 사전>에는 운동표현에 관한 선으로 속도선, 동작선, 효과선의 세 용어가 있지만 문맥적으로 의미가 유사해서 구분해 사용하기에는 쉽지 않은 면이 있다. 본 연구에서는 <드래곤볼>의 운동표현에 관한 선을 연구하기위해 기존의 운동표현에 관한 선의 의미상 문제점을 밝히고 새로운 대안을 제시하고자 하였다. 본 연구에서 운동표현에 관한 선을 기호적인 관점에서 분류하고 쓰임에 맞추어 새롭게 정의하고자 하였으며, 기존의 속도선, 동작선, 효과선에서 잔상선을 추가하여 네 가지 선으로 분류하였다. 첫 번째, 속도선은 '움직이는 대상의 운동표현을 속도성의 개념으로 표현한 선'으로 정의하였다. 표현함에 있어서 속도선이 대상의 형태와 결합했을 때는 직접속도선, 대상의 배경과 결합했을 때는 간접속도선으로 세분하였다. 두 번째, 동작선은 '움직이는 대상의 이동형태나 이동경로를 단순화시킨 선'으로 정의하였다. 세 번째, 효과선은 '움직이는 대상의 운동표현을 감각적 표현 혹은 감정적 표현으로 강조하는 선'으로 정의하였다. 네 번째, 잔상선은 '느리게 움직이거나 흔들리는 대상의 운동표현을 잔상효과로 표현한 선'으로 정의하였다. 본 연구에서 제시한 용어는 <드래곤볼>의 운동표현에 관한 선의 이해를 도울 수 있을 것이다.