• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.197-197
• /
• 2000

In this paper, we present a novel method for design of fuzzy Logic controllers by defining a set of characteristic parameters (CFLCS). These parameters are extracted and defined by examining the structure and characteristics of the individual components of FLCs and parameterizing those. Based upon this formulation, a series of simulations is conducted for plants having simple dynamics in order to see the performance of this proposed method. The simplicity and effectiveness of this method are discussed in detail.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.839-844
• /
• 2008

A novel state of health estimation method for hybrid electric vehicle lithium battery using sliding mode observer has been presented. A simple R-C circuit method has been used for the lithium battery modeling for the reduced calculation time and system resources due to the simple matrix operations. The modeling errors of simple model are compensated by the sliding mode observer. The design methodology for state of health estimation using dual sliding mode observer has been presented in step by step. The structure of the proposed system is simple and easy to implement, but it shows robust control property against modeling errors and temperature variations. The convergence of proposed observer system has been proved by the Lyapunov inequality equation and the performance of system has been verified by the sequence of urban dynamometer driving schedule test. The test results show the proposed observer system has superior tracking performance with reduced calculation time under the real driving environments.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.39-58
• /
• 1998

In this research, first of all, the special feat-ures of Haute Couture design world (1990∼1996) prevailed in Paris and Rome are investigated, and additionally the understanding of collection concept and design structure analysis are performed to show the various method-ology of creative design. Expression method and design method are the main criteria in analyzing, and the main results of this research are summarized as follows : 1. Most of designers in Paris and Rome ex-press the traditional costume style. Paris designers are focusing on the expression of design morphology through the abstraction and re-appearance without being confined to theme expression ; Rome designers are expressing their main ideas utilizing the fashion image as their theme in lieu of expressing the design morphology. 2. Most of the designers in Paris and Rome are using simple lines for their design. Paris designers prefer the plastic design based upon formal and symmetrical balance of informal and asymmetrical balance to the partial trans-formation design ; Rome designers are enjoy-ing rather the partial transformation using the detail and trimming than the plastic design.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1424-1429
• /
• 2003

In this paper, the design method of sliding mode control (SMC) system for SISO linear system is discussed. First, we consider the similarity between the design method of sliding mode hyper plane using the strict positive realness and the characteristics of zeros of feedback system and the design method of simple adaptive control. Based on such a consideration, we propose the new design method of SMC system using parallel dynamic compensator. As a result, SMC system can be constructed only with the derivative of output signal for controlled plant. The performance of SMC system designed by proposed method is confirmed through the numerical example.

• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.551-560
• /
• 2006

In this study, a controller for a nuclear reactor power is designed. The reactor is modeled using the three dimensional reactor design code MASTER. From the relationship of the input and output of the reactor code, a reactor dynamic model is derived by the system identification method. This model is more realistic than the one based on mathematical theories. With this model, a robust controller is designed by the extended frequency response method. As this method has the same theoretical background as the classical method, all of the existing design techniques of the classical method can be used directly. Furthermore, by introducing the real part of a Laplacian operator into the frequency response, the control design specification can be considered at the initial stage of design. The designed controller is simple, and gives a sufficient robustness with good performance.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.111-122
• /
• 1994

In this study, an algorithm which can be applied to the optimum design of simple steel plate girders was developed, and efficient optimization strategies for the solution of algorithm were found out. The optimum design algorithm consists of 3-levels of optimization. In the first and second levels of optimization, the absolute maximum bending moment and shearing force are extracted and in the third level of optimization, the optimum cross section of steel plate girder is determined. For the optimum design of cross section, the objective function is formulated as the total area of cross section and constraints are derived in consideration of the various stresses and the minimum dimension of flange and web based on the part of steel bridge in the Korea standard code of road bridge. Sequential unconstrained minimization technique using the exterior penalty function method(SUMT-EP), sequential linear programming(SLP) and sequential quadratic programming (SQP) are proved to be efficient and robust strategies for the optimum design of simple plate girder cross section. From the reliable point of view, SLP is the most efficient and robust strategy and SQP is the most efficient one from the viewpoint of converguency and computing time.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.33-40
• /
• 2000

With the increased requirement for automobile noise, a design fo mufflers with higher performances becomes more important in recent days. For a design of some mufflers, it must satisfy both minimizing back pressure and maximizing sound attenuation in broad range of frequecny. Even for a simple Helmholtz resonator, an important element in a muffler, a resonator design with accurate resonant frequency is difficult if one want to consider standing waves within the cavity. In this paper, the genetic algorithm, one of the optimization technique with high capability of global fittest solution and robust convergence, is applied to the design process of mufflers. Results show that the genetic algorithm can be successfully and efficiently used to find the fittest model for both mufflers and Helmoltz resonators.

• Computers and Concrete
• /
• v.21 no.2
• /
• pp.111-116
• /
• 2018

Establishment of test methods to assess the fresh properties of self-compacting concrete (SCC) are required to ensure the homogeneity in fresh and hardened states. This paper discusses the suitability of a simple test method for assessing the slump flow and stability of SCC by testing on self-compacting mortar (SCM) fraction. The proposed test method aims at investigating slump flow diameter test and sieve stability test of SCC by testing SCM fraction with a plunger penetration apparatus. A central composite modeling design was performed to evaluate the effects of water/cement ratio (W/C), superplasticizer dosage (SP) and powder marble content (MP) on slump flow diameter, stability and plunger penetration test of fresh SCC. The responses of the derived statistical models are slump flow (Sf), sieve stability (S) and plunger penetration (P). Relationships obtained in this study show acceptable correlations between plunger penetration test value and slump flow diameter test results and stability. It should note that the developed relationships are very useful to predict slump flow diameter and stability of studied SCC mixtures by carrying out a simple plunger penetration test on its mortar, which can save labour and time in laboratory experiments.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.305-309
• /
• 1989

This paper presents a simple method to compensate reactive/harmonic current components in power lines, with voltage type current controlled converter. The method proposed differs from conventional methods in that it does not rely on explict evaluation of active power. Instead, the closed-loop control of the do link voltage of the compensator plays a major role in adjusting the compensation current. It is shown that the system can be modelled as a simple linear system, which facilitates th analytical approach to the system characteristics. The dynamic performances are examined through the digital simulation and some aspects on the controller design are discussed. Experimental results showed good agreement with the anticipate performance

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.947-952
• /
• 1993

A simplified pole-placement design method is developed by analysing dynamic characteristics of the switching dynamics. Unlike the design procedure of conventional pole-placement, in the proposed method, overall state-space is directly decomposed into two invariant subspaces by the projection operator which is defined in the equivalent system, and then the closed-loop poles are assigned to each subspace independently. Hence, computations for state-feedback gain matrix are easy and simple.