• 한국산림과학회지
• /
• 제1권1호
• /
• pp.7-11
• /
• 1962

1. The inflorescence of the oak has been evolved through a serial reduction of the panicle as is presented in the figure 1. 2. Perianth lobes though they range from one to twelve in a flower six loves occur more than 50% of tested flowers as is tabulated in the table 1. They have been increased partly by a fusion of flowers and partly by a reversion of the stamen into the perianth lobe. They also have been decreased by a fusion of perianth lobes each other. 3. Stamen numbers in a flower range from one to twenty four, but eight stamens are more common than the others as is shown in the table 1. They have been increased by a fusion of flowers and decreased by a fusion of stamens in a flower as are presented in the figure 4. 4. Floral position in the inflorescence, environmental factors, hybridity, and abnormal nutrition supply seem to accelerate fusion and reduction of the stamen in a flower. 5. Flowers which consist of eight stamens and six perianth lobes occur more common than the others, however, the number of the stamen (Y) and the perianth lobes (X) appear to be correlated as follows (see also fig.5.). Y=1.09X+3.78, r=0.4 for Q. dentate Thumb. (7004 flowers investigated) Y=0.71X+4.18, r=0.48 for Q. mongolica Fischer (7409 flowers investigated) Y=1.03X+2.91, r=0.4 for Q. allena B1. (8662 flowers investigated) Y=0.69X+2.00, r=0.4 for Q. serrata Thumb. (9048 flowers investigated) 6. Morphological similarity of the bracteoles and perianth lobes as illustrated in the fig. 3, phenomena of a fusion of bracteoles and separation of perianth lobes into three groups in a flower, and increasing and decreasing phenomena of the stamen number and perianth lobes in a flower as presented in the figures 3 and 4 support the proposal on the oak flower evolution made by H. Hjelmquist in 1948.

• 한국지반공학회논문집
• /
• 제36권8호
• /
• pp.17-25
• /
• 2020

최근 한국건설기술연구원은 우주개발 및 심우주 탐사를 위한 전진기지로서 활용도가 높은 달에 관한 연구수행을 목적으로 달 행성 지상 환경 모사를 위한 대규모 지반 열 진공 챔버(DTVC)를 건설하였다. 유관연구 수행을 위해 대량의 한국형 인공월면토(KLS-1)가 요구되고 있음에도 불구하고 현실적으로 대량생산은 어려운 실정이다. 본 논문에서는 KLS-1의 대량 생산이 가능한 반자동화 시스템에 관해 상세하게 설명하고 있으며, 이것이 기존 생산 시스템보다 7배 이상 효율적임을 밝혀냈다. 뿐만 아니라, 월면토와의 유사성 증대를 위해 월면토 고유 특성인 nanophase Fe(0) (이하 np-Fe(0))을 모사하기 위한 실험적 연구를 진행하였다. 월면토를 이루는 광물 중 하나인 티탄철석(ilmenite)을 활용해 수소기체 환원반응을 진행한 결과, 700℃ 이상의 온도에서는 np-Fe(0)이 형성됨을 밝혀냈으며 900℃까지는 온도와 비례하여 np-Fe(0)이 증가함을 밝혀냈다.

• Journal of Information Processing Systems
• /
• 제17권5호
• /
• pp.1020-1033
• /
• 2021

Nowadays, online or mobile social network services (SNS) are very popular and widely spread in our society and daily lives to instantly share, disseminate, and search information. In particular, SNS such as YouTube, Flickr, Facebook, and Amazon allow users to upload billions of images or videos and also provide a number of multimedia information to users. Information retrieval in multimedia-rich SNS is very useful but challenging task. Content-based media retrieval (CBMR) is the process of obtaining the relevant image or video objects for a given query from a collection of information sources. However, CBMR suffers from the dimensionality curse due to inherent high dimensionality features of media data. This paper investigates the effectiveness of the kernel trick in CBMR, specifically, the kernel principal component analysis (KPCA) for dimensionality reduction. KPCA is a nonlinear extension of linear principal component analysis (LPCA) to discovering nonlinear embeddings using the kernel trick. The fundamental idea of KPCA is mapping the input data into a highdimensional feature space through a nonlinear kernel function and then computing the principal components on that mapped space. This paper investigates the potential of KPCA in CBMR for feature extraction or dimensionality reduction. Using the Gaussian kernel in our experiments, we compute the principal components of an image dataset in the transformed space and then we use them as new feature dimensions for the image dataset. Moreover, KPCA can be applied to other many domains including CBMR, where LPCA has been used to extract features and where the nonlinear extension would be effective. Our results from extensive experiments demonstrate that the potential of KPCA is very encouraging compared with LPCA in CBMR.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.382-392
• /
• 2021

In recent years, floating offshore wind turbines have attracted more attention as a new renewable energy resource while bottom-fixed offshore wind turbines reach their limit of water depth. Various projects have been proposed with the rapid increase in installed floating wind power capacity, but the economic aspect remains as a biggest issue. To figure out sensible approaches for saving costs, a comparison analysis of the levelized cost of electricity (LCOE) between floating and bottom-fixed offshore wind turbines was carried out. The LCOE was reviewed from a social perspective and a cost breakdown and a literature review analysis were used to itemize the costs into its various components in each level of power plant and system integration. The results show that the highest proportion in capital expenditure of a floating offshore wind turbine results in the substructure part, which is the main difference from a bottom-fixed wind turbine. A floating offshore wind turbine was found to have several advantages over a bottom-fixed wind turbine. Although a similarity in operation and maintenance cost structure is revealed, a floating wind turbine still has the benefit of being able to be maintained at a seaport. After emphasizing the cost-reduction advantages of a floating wind turbine, its LCOE outlook is provided to give a brief overview in the following years. Finally, some estimated cost drivers, such as economics of scale, wind turbine rating, a floater with mooring system, and grid connection cost, are outlined as proposals for floating wind LCOE reduction.

• Journal of Microbiology
• /
• 제44권5호
• /
• pp.556-561
• /
• 2006

A differential display for the expression profiles of wild-type Cryphonectria parasitica and its virally-infected isogenic hypovirulent strain revealed several transcripts of interest, which evidenced significant matches with fungal genes of known function. Among which, we have further analyzed an amplified PCR product with significant sequence similarity to the known fungal stress-responsive thioredoxin gene from Neurospora crassa. The product of the cloned thioredoxin gene, CpTrx1, consists of 117 amino acids, with a predicted molecular mass of 13.0 kDa and a pI of 5.4. Sequence comparisons demonstrated that the deduced protein sequence of the CpTrx1 gene evidenced a high degree of homology to all known thioredoxins, with the highest degree of homology with trx1, a thioredoxin gene from Saccharomyces cerevisiae, and evidenced a preservation of the conserved hall markresidues (Trp-Cys-Gly-Pro-Cys) at the active site of thioredoxin. The E. coli-generated CpTRX1 manifested thioredoxin activity, according to the insulin reduction assay, which indicates that the cloned gene does indeed encode for the C. parasitica thioredoxin.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.468-475
• /
• 2016

In this article, entropy generation on MHD Williamson nanofluid over a porous shrinking sheet has been analyzed. Nonlinear thermal radiation and chemical reaction effects are also taken into account with the help of energy and concentration equation. The fluid is electrically conducting by an external applied magnetic field while the induced magnetic field is assumed to be negligible due to small magnetic Reynolds number. The governing equations are first converted into the dimensionless expression with the help of similarity transformation variables. The solution of the highly nonlinear coupled ordinary differential equation has been obtained with the combination of Successive linearization method (SLM) and Chebyshev spectral collocation method. Influence of all the emerging parameters on entropy profile, temperature profile and concentration profile are plotted and discussed. Nusselt number and Sherwood number are also computed and analyzed. It is observed that entropy profile increases for all the physical parameters. Moreover, it is found that when the fluid depicts non-Newtonian (Williamson fluid) behavior then it causes reduction in the velocity of fluid, however, non-Newtonian behavior enhances the temperature and nanoparticle concentration profile.

• International Journal of Concrete Structures and Materials
• /
• 제9권2호
• /
• pp.133-143
• /
• 2015

This paper describes the test results and nonlinear analysis of reinforced concrete T-beams strengthened by bonded steel plates under increasing static loading conditions. The first part of this paper discusses the flexural tests on five T-beams, including the test model design (based on similarity principles), test programs, and test procedure. The second part discusses the nonlinear numerical analysis of the strengthened beams, in which a concrete damage plasticity model and a cohesive behavior were adopted. The numerical analysis results are compared with experimental data and show good agreement. The area of bonded steel plate and the anchor bolt spacing were found to have an impact on the cracking load, yield load, and ultimate load. An increase in the area of steel plate and a reduction of the anchor spacing could significantly improve the cracking and ultimate loads and decrease the damage of the beam.

• 한국대기환경학회지
• /
• 제17권4호
• /
• pp.347-354
• /
• 2001

SCR (Selective Catalytic Reduction) process is presently considered as one of the most effective techniques for removing nitric oxides from exhaust gases. In this study, based on the conceptually designed SCR reactor of 500 MW coal fired power plant. a reduced scale (1/20) SCR reactor model was made to analyze the flow pattern in front of catalyst layer according to the guide vane's design factors such as the number, interval, and angle of vanes. The results of the test were compared to those numerical simulation in order to assure the reliability of two methods. On the basis of our study. the critical Reynolds number (2.0$\times$ 10$^{5}$ ) was proposed for ensuring the similarity between the reduced scale model and the prototype of SCR reactor. Optimum design parameters of guide vanes were determined as follows, 4 vanes, the first vane angle of 93$^{\circ}$, and the vane intervals of 0.85 S/n, 1.05 S/n, 1.1 S/n, 1.0S/n, 1.0S/n (S: the distance of duct, n: the number of guide vanes). The excellent agreement between the results of the numerical simulation and the reduced scale model provides the validation of two methods for prediction of flow through SCR reactor.

• 도시과학
• /
• 제7권1호
• /
• pp.29-38
• /
• 2018

The cadastral rehabilitation project, which has been implemented since 2012, is a project to re-examine the national land that is not in conformity with the cadastral map, There is a lot of trouble in securing financial resources for business execution. This study examines the utility of UAS(Unmanned Aerial System) image - based cadastral demarcation as an alternative to budget reduction in the current state of cadastral rehabilitation, reasonable boundary adjustment, UAV(Unmanned Aerial Vehicles) is used to create 3D models and orthoimages of business districts, and to check accuracy by superimposing and comparing with digital maps of NGII(National Geographic Information Institute). As a result of the study, the accuracy of the 3D model and the orthoimage through the SfM(Structure-from-Motion) - based image interpretation of the digital map of the NGII were derived. In particular, we confirmed the similarity of UAS-based orthoimage with the cadastral boundaries affirmation, It is anticipated that the cost saving effect of current survey and boundary survey can be expected. In addition, it is easy to prepare a report to reduce civil complaints, which is a problematic element of the adjustment.

• 한국통신학회논문지
• /
• 제28권7A호
• /
• pp.557-562
• /
• 2003

An output multiplexer of manifold type is widely used in a recent satellite transponder for its mass and volume reduction. For correct operation, the filters of such a multiplexer must be singly terminated. In this paper, a simple synthesis method of a 6-pole dual-mode singly-terminated filter is described. From the transfer function of the filter, network parameters such as in/output terminations and coupling coefficients are obtained easily without complicated matrix algebra such as orthogonal projection and similarity transformation. Two different-structure filters are taken into consideration and the network parameters of each filter have been extracted from the same transfer function. It is shown that the responses of two filters are same to each other since their network parameters are obtained from the same transfer function. The method described in this paper can be applied to the other degree singly terminated filter.