• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.111-120
• /
• 2007

This paper is results of experimental research on the effect of application of similarity related to permeability of soil on the consolidation behavior as centrifuge modeling of consolidation is performed with the centrifuge model facility. In this research, the permeability of soil was controlled by changing the viscosity of porewater as the mixed water with glycerin was used during the centrifuge model experiments. The effect of drainage path on consolidation was investigated by installing the vertical drains. A serise of centrifuge model tests with conditions of single vertical and radial horizontal drainage were carried out. Kaolinite and Jumunjin standard sand were used as soft clay and surcharges respectively during tests. For testing condition of single vertical drainage considering similarity of permeability, it was found that consolidation with mixed porewater with glycerin was delayed in comparisons sons with test results with water only. For conditions of horizontal drainage with vertical drains, a low permeability by changing the viscosity of pore water resulted in delayed degree of consolidation at an initial stage of consolidation. But, it predicted not much differences in settlement as long as the consolidation time was sufficiently long enough to finish consolidation. Consequently, it was found that similarity in permeability should be considered to be critical for the case of centrifuge model experiments related to consolidation with long drainage path.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.735-744
• /
• 2019

One of the key factors for recognition performance in the automatic target recognition for synthetic aperture radar imagery(SAR-ATR) system is reliability of the SAR target database. To achieve optimal performance, the database should be constructed using the images obtained under the same operating condition as the SAR sensor. However, it is impractical to have the extensive set of real-world SAR images, and thus those from the electro magnetic prediction tool with 3-D CAD models are suggested as an alternative where their reliability can be always questionable. In this paper, a method for similarity assessment between target SAR images is presented inspired by the fact that a target SAR image is mainly characterized by the features of scattering centers. The method is demonstrated using a variety of examples and quantitatively measures the similarity related to reliability. Its assessment performance is further compared with that of the existing metric, structural similarity(SSIM).

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.87-98
• /
• 2015

As SPA brands are growing in Korean apparel markets, they are extending their well-established brands into new markets (i.e., SPA brand extensions). To investigate psychological mechanism underlying SPA brand extensions, this study conceptually proposed such consumer information processing of SPA brand extensions as (1) perception of similarity between SPA brand extensions and their original brands and (2) evaluations on the SPA brand extensions (i.e., attitude and purchase intent). For hypothetical SPA brand extensions (high, moderate and low similarity conditions), perceived similarity was measured by using a eye-tracker and evaluations were assessed by using a self-reported questionnaire. The results reveal that the amount of external information searching for SPA brand extensions was larger in the following order: moderate, low and high similarity conditions. The depth of SPA brand information processing was also deeper in the same order. Evaluations on SPA brand extensions were higher in high and moderate similarity conditions than in low similarity condition. The findings suggest that the evaluations are affected by perceived similarity and the amount of cognitive efforts in processing SPA brand extensions.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.87-90
• /
• 2002

Computational study has been undertaken to investigate the aerodynamic influence of side jet on a supersonic missile and to find a similarity condition between the flight condition and the wind tunnel testing. Tasks were performed to validate the existing Raytheon test body with side jet, to simulate the flow inside the supersonic wind tunnel, and to compare the flow fields between the missile in free flight and that in the wind tunnel. Then sub-scale model of body-tail configuration was analyzed to estimate the influence of the side jet on the missile components. It Is found that the influence of side Jet is not as significant on the tail region as on the body surface and a simple algebraic formula for aerodynamic coefficients accounting for the side jet as a point force may be cautiously utilized in setting up control logic.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.724-729
• /
• 2004

An experimental method to investigate the dynamic characteristics of buoys in extreme environmental condition is established. Because the buoy model requires a resonable size for accurate experiment, the test condition in model basin that satisfies the similarity law is hardly compatible with capability of test facilities. It is suggested that the linear wave component that is unable to satisfy similarity is separated with others‥‥‥

• 한국전산유체공학회:학술대회논문집
• /
• 2002.05a
• /
• pp.41-46
• /
• 2002

Computational study has been undertaken to investigate the aerodynamic influence of side jet on a supersonic missile and to find a similarity condition between the flight condition and the wind tunnel testing. Tasks were peformed to validate the existing Raytheon test body with side jet, to simulate the flow inside the supersonic wind tunnel, and to compare the flow fields between the missile in free flight and that in the wind tunnel. Then sub-scale model of body-tail configuration was analyzed to estimate the influence of the side jet on the missile components. It is found that the influence of side jet is not as significant on the tail region as on the body surface and a simple algebraic formula for aerodynamic coefficients accounting for the side jet as a point force may be cautiously utilized in setting up control logic.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.561-565
• /
• 2009

The performance of supersonic impulse turbine was investigated experimentally. Experiment was performed with the compressed air instead of the high temperature burned gas because of the limitation of test facility and danger. As a result of the experiment with the compressed air, the performance in the real gas(burned gas) was predicted by the similarity method. The nozzle area of prototype turbine was calculated based on the real gas. So, it is difficult to satisfy the similarity conditions completely. Two similarity conditions were set and the design point for real gas was existed between two similarity conditions. And, the new turbine test model with calculated nozzle area based on the compressed air was tested. Therefore, similarity point of the new turbine test model was also existed between above two similarity points. It means that the design point for real gas was similar to the test point with the new turbine model.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.93-100
• /
• 2019

Similarity computation is very crucial to performance of memory-based collaborative filtering systems. These systems make use of user ratings to recommend products to customers in online commercial sites. For better recommendation, most similar users to the active user need to be selected for their references. There have been numerous similarity measures developed in literature, most of which suffer from data sparsity or cold start problems. This paper intends to extract preference information as much as possible from user ratings to compute more reliable similarity even in a sparse data condition, as compared to previous similarity measures. We propose a new similarity measure which relies not only on user ratings but also on movie genre information provided by the dataset. Performance experiments of the proposed measure and previous relevant measures are conducted to investigate their performance. As a result, it is found that the proposed measure yields better or comparable achievements in terms of major performance metrics.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.108-117
• /
• 2011

Old train carriages have been used to create artificial reefs (AR) as part of programs to enhance ocean fisheries and recreational resources. This study conducted hydraulic modeling experiments to estimate the structural stability of a train carriage AR. By applying fixed- and movable-bed conditions and Froude similitude, theoretical and hydraulic experiments revealed major design forces(e.g., water waves and currents). The results of this study showed that some dimensionless design parameters (e.g., surf similarity parameters, water particle velocity, scouring, and deposition) also affect the stability of an AR under various wave and current field conditions. In the fixed-bed condition, movement of the AR occurred when dimensionless water particle velocity based on the surf similarity parameter was larger than about 0.32. In the moveable-bed condition, the settlement depth (field values) of the AR ranged from 6 to 30 cm. The results indicated that characteristics of the sediment/bed condition and the direction of external forces acting on an AR should be considered when selecting AR sites.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.810-816
• /
• 2012

As wind power has increased steadily, the importance of a condition monitoring system is being emphasized to maximize the availability and reliability of a wind turbine. To develop the advanced algorithms for fault detection and lifespan estimation, a wind turbine simulator is essential for verification of the proposed algorithms before applying them to a condition diagnosis & integrity prognosis system. The developed new-type simulator in this paper includes blades and various sensors as well as a motor, a gearbox and a generator of which the existing simulators generally consist. It also has similarity with a 3MW class wind turbine and can be used to acquire operational data from various operation conditions. This paper presents a design method of control logic for the wind turbine simulator, which gives a wind generation method and similar dynamic characteristics with the 3MW wind turbine. Finally, the proposed control logic is verified through experiments.