• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.784-789
• /
• 1997

Aluminium solid electrolytic capacitor in which electroconducting polypyrrole(PPy) is used as an electrolyte is studied. Pyrrole(Py) is electrochemically synthesized using the etched and anodized aluminium foil electrode($Al_2O_3$) as an anode on which the thin layer of chemicalpolymerized PPy as a pre-coating layer is formed previously by chemical oxidative polymerization(CP). Investigating the effects of the polymerization conditions on the electrical characteristics of resulting capacitors, the capacitors which were obtained from the galvanostatic electrolysis of pyrrole containing sodium p-toluenesulfonate(TsONa) under the currents of $2.0{\sim}4.0mA/unit(6.5{\times}10mm)$, showed the most superior properties.

• Applied Biological Chemistry
• /
• v.5
• /
• pp.23-31
• /
• 1964

Six species of marine shell-fishes were subjects in this study. The content of RNA and DNA in mid-intestinal glands (liver) was determined and RNA was also extracted from above materials by phenol method and their nucleotide compositions were analysed by ion exchange column chromatography. C; citidylic acid, A; adenylic acid, G; guanylic acid, U; uridylic acid, Pu; purine nucleotide, Py; pyrimidine nucleotide 1) Their RNA and DNA content was summarized in the next table.(mg/100mg of lipid free powder) Materials RNA DNA RNA/DNA Meretrix meretrix Susoria (Gmelin) 6.82 0.82 6.5 Anadara(scapharea) inflata(Reeve) 4.62 0.70 6.6 Ostrea(crassostrea) gigas Thunberg 8.74 1.03 8.5 Turbo cornutus Solander 2.16 0.60 3.6 Haliotis gigantea Gmelin 7.02 0.22 36.0 2) Their RNA nucleatide compositions was summaries in following tabe. Materials/RNA nucleotide G+C/A+U G+U/A+C Pu/Py Meretrix meretrix Susoria(Gmelin) 1.12 1.36 1.08 Venerupis philippinarum (Adoms et Reeve) 1.15 1.31 1.13 Anadara(scapharea) inflata(Reeve) 0.97 1.26 1.02 Ostrea (crassostrea) gigas Thunberg 1.51 1.34 1.31 Turbo cornutus Solander 1.37 1.29 1.03 Haliotis gigantea Gmelin 1.33 1.46 1.22 In six species of marine fishes examined, Pu/Py and G+C/A+U ratios of RNA vary in respective wide ranges of 1.02-1.31, 0.97-1.51, while G+U/A+C ratio in the range of 1.26-1.46, not far from 1.3. This G+U/A+C ratio seems to be specific in this species.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.442-448
• /
• 2012

The effects of zeolite-type catalysts addition on the thermal decomposition of the PP resin have been studied in a thermal analyzer, a Pyrolyser GC-mass, and a small batch reactor. The zeolite type catalysts tested were natural zeolite, used FCC catalyst, and ZSM-5. As the results of TGA experiments, the pyrolysis starting temperature for PP varied in the range of $330{\sim}360^{\circ}C$ according to the heating rate. Addition of the zeolite type catalysts in the PP resin increased the pyrolysis rate in the order of used FCC catalyst> natural zeolite> ZSM-5 > PP resin. Adding the used FCC catalyst in the PP reduced most effectively the pyrolysis finishing temperature. In the PY-G.C. mass experiments, addition of zeolite type catalysts decreased the molecular weight of pyrolyzed product. In the batch system experiments, the mixing of used FCC catalyst enhanced best the initial yield of fuel oil, but the final yield of fuel oil was 2% higher in the case of mixing of natural zeolite. Also in the carbon number analysis, used FCC catalyst was the most useful one in this experiments for fuel oil.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.301-305
• /
• 2009

The novel carbon coating process for interlayer of fiber reinforced ceramic composites between fiber and matrix was performed by carbonizing phenolic resin solution that coated on fiber surface in $N_2$ atmosphere at $600^{\circ}C$ to improve the strength and fracture toughness of CMC(ceramic matrix composite). 160 nm carbon layer was coated on fiber surface with 5 vol% of phenolic resin solution. Since the process temperature ($600^{\circ}C$) is lower than chemical vapor deposition($900{\sim}1000^{\circ}C$), the strength and toughness could be preserved. Furthermore the coating thickness uniformity was improved to 8% of deviation along the stacking sequence. Therefore, prevention from fiber degradation during coating process and controlling coating thickness uniformity along the preform depth were achieved by coating with phenolic resin carbonizing method.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.118-124
• /
• 2007

GRLs(Guidance Residue Levels) of agricultural chemicals for tobacco are recommended by the CORESTA Agro-Chemical Advisory Committee guide. In the GRLs list, organochlorine group is one of pesticides commonly used on tobacco cultivation. In this model study, the quantitative correlation in the transfer rate of pesticide residue into tobacco smoke by spiking of organochlorine pesticides to cigarette and pyrolysates were investigated. The spiking concentration referred to the range of GRLs list and the organochlorine pesticides in mainstream smoke were analyzed by GC-MS. For the understanding of the composition variation versus temperature, the behavior of pesticides was investigated by pyrolysis-gas chromatography-mass spectrometry(Py-GC-MS). In this study, the transfer rate of pesticide residue into tobacco smoke at four different spiking concentration and the composition of pyrolysates were analyzed differently. At $10\;{\mu}g/cig$ spiking concentrations, the organochlorine pesticides were transferred into tobacco smoke in $0.02\;{\sim}\;10.19\;%$ each of component and the most of pesticides were pyrolyzed during smoking. It was found that the decomposition compounds from organochlorine pesticides were mainly composed of oxygenated and nitrogenous compounds. This study could estimate that the transfer rate of pesticides into tobacco smoke is very small amount.

• Journal of Radiation Protection and Research
• /
• v.41 no.4
• /
• pp.378-383
• /
• 2016

Background: Radiation dose rates in PRIDE facility is evaluated quantitatively for assessing radiation safety of workers because of large amounts of depleted uranium being handled in PRIDE facility. Even if direct radiation from depleted uranium is very low and will not expose a worker to significant amounts of external radiation. Materials and Methods: ORIGEN-ARP code was used for calculating the neutron and gamma source term being generated from depleted uranium (DU), and the MCNP5 code was used for calculating the neutron and gamma fluxes and dose rates. Results and Discussion: The neutron and gamma fluxes and dose rates due to DU on spherical surface of 30 cm radius were calculated with the variation of DU mass and density. In this calculation, an imaginary case in which DU density is zero was added to check the self-shielding effect of DU. In this case, the DU sphere was modeled as a point. In case of DU mixed with molten salt of 50-250 g, the neutron and gamma fluxes were calculated respectively. It was found that the molten salt contents in DU had little effect on the neutron and the gamma fluxes. The neutron and the gamma fluxes, under the respective conditions of 1 and 5 kg mass of DU, and 5 and $19.1g{\cdot}cm^{-3}$ density of DU, were calculated with the molten salt (LiCl+KCl) of 50 g fixed, and compared with the source term. As the results, similar tendency was found in neutron and gamma fluxes with the variation of DU mass and density when compared with source spectra, except their magnitudes. Conclusion: In the case of the DU mass over 5 kg, the dose rate was shown to be higher than the environmental dose rate. From these results, it is concluded that if a worker would do an experiment with DU having over 5 kg of mass, the worker should be careful in order not to be exposed to the radiation.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2013

The generation of staurolite from the mixed-phase muscovite and the metamorphic environment of shales in the Baekunsa formation, Hongsan, Buyeo, were studied using electron probe micro analysis (EPMA). The average chemical composition of mica-type mineral is $(K_{1.11}Na_{0.26}Ca_{0.04})(Al_{3.93}Fe_{0.21}Mg_{0.07})(Si_{6.08}Al_{1.92})O_{20}(OH)_4$, and shows a characteristics of the so-called illite with a low content of interlayer cations and Fe, Mg in octahedral sites. The mica-type mineral shows a typical chemical composition of the mixed-phase among muscovite, pyrophyllite, and chlorite (mixed-phase muscovite, $Mu_{70.5}Py_{23.5}Ch_{6.0}$). The staurolite, in general, occurs with the mixed-phase muscovites, pyrophyllites, and aluminosilicates in the rock. We consider that staurolite can be formed by a reaction involving pyrophyllite such as pyrophyllite+chloritoid. The chloritoid is formed by a reaction between pyrophyllite and chlorite and is supposed to be used up in the process of staurolite formation. As a result, the mixed-phase muscovite, formed during the transition of illite to muscovite, plays an important role for the generation of the staurolite. Considering that the reaction occurs at the temperature higher than $300^{\circ}C$ and pyrophyllites transform into aluminosilicates at $350^{\circ}C$, the shale in the Baekunsa formation can be considered to have been experienced a metamorphic temperature between $300{\sim}350^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.341-346
• /
• 1992

The antimutagenic effects of enzymatic browning reaction products (MEBRPs) of polyphenol compounds (catechol, homocatechol, hydroxyhydroquinone, pyrogallol) by enzyme extracted from mushroom (Agaricus bisporus) were demonstrated through spore rec-assay using B. subtilis $H17(rec^+)$ and $M45(rec^-)$, Ames test using S. typhimurium TA98 and TA100 and SOS chromotest using E. coli PQ37/plasmid pKM101. In spore rec-assay, the MEBRPs showed antimutagenic effects by decreasing of the inhibition zone induced by MNNG. In Ames test with S-9mix in both TA98 and TA100, all of MEBRPs showed strong antimutagenic effects of about 21 to 99% against mutation by $B({\alpha})P$ and Trp-P-1, as adding $300\;{\mu}l$ of the MEBRPs. In SOS chromotest, MEBRPs showed antimutagenic effects by inhibiting the SOS-inducing function induced by 4NQO and MMC, as increasing in concentration of the MEBRPs. But they did not showed mutagenicity in these bacterial assays.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.147-154
• /
• 1999

This research was carried out to obtain the field resistance to disease and pest, and high yielding of new Boxthorn (Lycium chinense Mill.) varieties. Growth characteristics, yield potential, correlation of trait which was related the yield and path coefficient of the domestic native varieties. two of cultivated varieties and four of introduced varieties were investigated. In growth characters of collected varieties, the stem length of collected varieties in China were slightly long. Leaf area in Jindo, Kumsan native and Yusong 1 and 2 were wider than that of other varieties. Resistance to pest iniury was very strong at China 1, Japan 1 and Yusong 2 in eriophyidmite, and also resistance to anthrax anthracnose were showed less than 10% of the rate of attack fruit at Japan 1 and China 1. Flowering stage was more early in Chungyang native than that of other varieties. Fruit size of Kumsan native, Yusong 2 were large size fruit varieties. Fruit setting number was most abundant at 1,623 in Yusong 2 which was collected variety. And dry yields of fruit per lOa was more cmparatively abundant in Yusong 2 at 86% than those of Chungyang native. The high correlation cofficienct character with fruit yield were fruit setting and branching number and leaf area. Direct effect by path anaslysis were fruit setting number (Py=0.45), and branching number was showed indirect effect.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.4
• /
• pp.267-277
• /
• 2024

The Sortie Generation Rate (SGR) is a critical performance indicator for carrier-based aircraft and is a key factor for the carrier design process. This study aims to analyze the factors that affect SGR and establish a representative Sortie Generation Process (SGP) along with simulation results to calculate SGR for a naval ship equipped to carry aircraft. Detailed SGR factors are identified from the perspectives of the aircraft, aviation personnel, and aircraft carrier during the flight preparation stage, and the SGP is established accordingly. As a representative, Korean Navy's CVX basic design is chosen for detailed analysis. The physical dimension and spots for the deck design with time and probabilistic data of SGP are considered to develop a queueing network model for SGR calculation. To consider the specific probabilistic features, the model was solved with discrete event simulation tools(SimPy and AnyLogic) where the results show great agreement. Such findings on SGR factors and calculation are expected to be incorporated in the future development of SGR calculation algorithms and also present guidelines for proper design of aircraft carrier based on concrete operation concept.