• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.386-392
• /
• 2008

Silver particles were synthesized from silver nitrate by homogeneous precipitation and chemical reduction methods involving the intermediate silver cyanate. The obtained silver particles were characterized by XRD, SEM, TEM, and BET. Urea which could prevent the agglomeration of the reduced silver particles was used as a homogeneous precipitator. The spherical silver particles with average particle diameter of 100 nm were obtained under the optimum reaction conditions. The optimum synthetic conditions were found as follows: reaction temperature $100^{\circ}C$, reaction time 60 min, concentration of silver nitrate $1{\times}10^{-2}$ mol, urea $5{\times}10^{-3}$ mol, and sodium citrate $8.5{\times}10^{-4}$ mol. The phase of obtained silver particles was crystalline state and the silver particles were relatively dense, which had the surface area of $0.7571\;m^{2}/g$.

• 한국대기환경학회지
• /
• 제24권6호
• /
• pp.674-681
• /
• 2008

Silver as a metal catalyst has been used to remove odorous compounds. In this study, silver particles in nano sizes ($5{\sim}30nm$) were prepared on the surface of $NaHCO_3$, the supporting material, using a sputtering method. The silver nano-particles were dispersed by dissolving $Ag-NaHCO_3$ into water, and the dispersed silver nano-particles in the aqueous phase was applied to remove inorganic odor compounds, $NH_3$ and ${H_2}O$, in a scrubbing reactor. Since ammonia has high solubility, it was removed from the gas phase even by spraying water in the scrubber. However, the concentration of nitrate (${NO_3}^-$) ion increased only in the silver nano-particle solution, implying that the silver nano-particles oxidized ammonia. Hydrogen sulfide in the gas phase was rapidly removed by the silver nano-particles, and the concentration of sulfate (${SO_4}^{2-}$) ion increased with time due to the oxidation reaction by silver. As a result, the silver nano-particles in the aqueous solution can be successfully applied to remove odorous compounds without adding additional energy sources and producing any harmful byproducts.

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.146-153
• /
• 2011

Silver nano-particles have been synthesized by liquid phase reduction method and alcohol reduction process. Silver nano-particles of the size 30 ~ 40 nm were formed successfully by alcohol reduction process. The formation, structure, morphology and size of silver nano-particles have been studied using FE-SEM, TEM, XRD, UV-visible spectroscopy. In particular high dispersion stability of the synthesized silver nano-particles could be obtained by PVP binding. Antibacterial activity of Ag/PET master batch sample made from its nano-silver particles showed excellent antibacterial activity against S. aureus and E. coli.

• 대한전기학회논문지
• /
• 제37권1호
• /
• pp.55-62
• /
• 1988

The variation of electrical resistivity of silver particle-filled polymers with the volume percent of silver particles was investigated. Also, the relationships between the surface tension of polymer and dispersion effect of silver particles were studied to find the steep drop of electrical resisivity, in view of agglomerate morphology. The critical volume precent of silver particles varied depending on the polymer species and increased with the increasing surface tension of polymer. The steep variation of resistivity with the increasing temperature was explained with the expansion of polymer at the melting temperature of polymer. The conductive break down current increased with the increasing volume percent of silver particles in the Ag/LDPE system and that was attributed to heat of Joule taken througn the contact area between the silver particle.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.59-66
• /
• 2000

An experimental study on the effect of silver particles on the sliding behavior of bearing steels was performed by using a ball-on-disk tribometer. Tests were carried out in ambient air, dry and vacuum. Disks of AISI 52100 were silver-coaled by a thermal evaporation method, and the effects of silver particle transfer on friction were firstly analyzed. In order to understand further the mechanism of silver particles transfer and its effect on friction and wear, pre-compressed silver particles were artificially introduced into the friction interface and the results were compared to those of silver-coated specimens. Results showed that the introduced silver particles produced transfer layers and resulted in low friction. It also showed that this low friction is closely related to the characteristic behavior of transfer layers. Shakedown and rachetting occurred at the friction interface and affected the friction and wear.

• Carbon letters
• /
• 제4권4호
• /
• pp.168-174
• /
• 2003

Silver nitrate ($AgNO_3$) powder was mixed into a reformed pitch precursor. Then, the silver-containing pitch was melt spun to form round and "C" shape fibers. A wire mesh was inserted prior to the nozzle to improve the spinnability of the silvercontaining precursor pitch. Silver particles in the carbon fibers (CFs) were detected by XRD and TEM. These tests showed that silver particles were uniformly distributed and the total amount of silver remained constant during stabilization and carbonization. Next, the silver-containing CFs were activated by steam diluted in nitrogen gas. Silver particles accelerated the activation rate, but the specific surface areas of the silver-containing ACFs were similar to those of non-silver containing ACFs at the same burn-off levels. The specific surface area of the C-shaped activated carbon fibers was larger than that of the round activated carbon fibers. The likely reason is that the surface area of a C-shaped CF is about two times larger than that of a round CF when equivalent cross-sectional areas are compared. A small amount of silver particles in the periphery of the CFs was removed during the activation, but the remainder of silver was stayed within the ACFs.

• 대한환경공학회지
• /
• 제27권7호
• /
• pp.771-776
• /
• 2005

최근 항균 성능이 뛰어나면서도 인체에 유해하지 않은 나노 사이즈 은 입자를 이용한 항균 제품 개발 및 연구가 활발히 이루어지고 있음에 따라, 나노 사이즈의 은 입자를 보다 쉬운 방법으로 균일하게 제조하고, 그 특성을 평가하는데 많은 관심이 집중되고 있다. 본 연구에서는 은 이온의 광환원을 통해 나노 은 입자를 $15{\sim}20\;nm$ 크기로 균일하게 제조한 뒤, 나노 은 입자의 농도, pH, 온도가 변화함에 따른 항균 특성을 살펴보고 이를 정량적으로 평가, 은 이온의 항균 특성과 비교하였다. 또한 주사 전자 현미경과 투과 전자 현미경을 통하여 나노 은 입자의 미생물 불활성화 특성을 은 이온의 미생물 불활성화 특성과 비교하였다. 주요 결과로는 나노 은 입자의 항균 효과는 동일한 은 농도를 기준으로 하였을 때 은 이온의 항균 효과에 비하여 약 20배 정도 적은 것을 알 수 있었다. 또한 나노 은 입자의 농도, 온도가 높을수록 항균 성능은 향상됨을 알 수 있었으며 이는 은 이온의 실험 결과와 일치한다. 그러나 나노 은 입자의 항균 성능은 높은 pH에서 향상된 반면, 은 이온의 경우 pH 변화에 따른 항균 성능 변화가 관찰되지 않았다. 나노 은 입자와 은 이온에 의해 불활성화된 미생물을 주사 전자 현미경과 투과 전자 현미경으로 관찰한 결과, 나노 은 입자는 미생물 세포막을 크게 손상시키는 반면, 은 이온은 그렇지 않았다. 은 이온의 경우 은 이온이 미생물 안으로 흡수되어 세포질막을 손상시켜 미생물을 불활성화 시키는 것으로 알 수 있었다.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.221-227
• /
• 2001

The effect of silver particles on the sliding behavior of bearing steels was studied experimentally by using a ball-on-disk tribometer. Tests were performed in ambient air, dry air and vacuum. Disks of AISI 52100 were silver-coated by a thermal evaporation method, and the effects of silver particle transfer on friction were analyzed. In order to understand further the mechanism of silver particle transfer and its effect on friction and wear, pre-compressed silver particles were artificially introduced into the friction interface and the results were compared to those of silver-coated specimens. Results showed that the introduced silver particles produced transfer layers and resulted in low friction. It also showed that this low friction is closely related to the characteristic behavior of transfer layers. Shakedown occurred at the friction interface affected the friction and wear.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.63-65
• /
• 2008

The functional non-woven fabrics have been applied in various industry fields, such as clothing, hygiene, environment, medical and so forth. The functional non-woven fabrics were manufactured by meltblown and finishing processes. These functional non-woven fabrics were made of 2,000ppm nano-silver resin composite and polypropylene resin. Silver is one of the most universal antimicrobial substances. Nano-technology enables us to expand the surface area of silver particles markedly. Nano-silver particles were successfully produced less than 10nm in size. The functional non-woven fabrics including nano-silver particles showed excellent antibacterial activities against Staphylococcus aureus(ATCC 6538) and Klebsieila pneumoniae (ATCC 4352). From the results, nano-silver particels probably will be available as a good and safe antibiotic alternative.

• 공업화학
• /
• 제23권1호
• /
• pp.14-17
• /
• 2012

다양한 종류의 상온 이온성액체를 이용한 화학적 환원법으로 미세 은 입자를 제조하였다. 이온성액체의 음이온의 종류에 따라 제조된 은 입자는 다양한 크기와 입도분포를 가지는 것이 관찰되었으며, 이는 이온성액체의 음이온이 은 입자들의 결합에 영항을 주기 때문이다. 여러 가지 이온성액체 중에서 미세 은입자를 제조하는데 있어서 가장 효과적인 이온성액체는 1-Butyl-3-methylimidazolium hexafluorophosphate였다.