• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.314-321
• /
• 1996

In this paper, the chemical process of each step in fabricating the holographic phase diffraction grating with silver salt sensitive materials has been studied in detail. A new analysis of the bleaching methods have been made through the study. The result shows that among the types of bleaching methods, the reversal bleach can not be reacted chemically. And the experiments about the chemical reactions, the characteristics of the reaction products and the refractive modulation types by the bleaching methods have been done to prove the theory. It is investigated that the exposure acts as the catalyst of developing reaction and affects the developing reaction time conspicuously. At the optimum developing reaction times, which could be taken from the experiments, the holographic diffraction gratings with high diffraction efficiency over 70% could be obtained in the range of the exposure quantity 50~350 [$\mu$J/ $\textrm{cm}^2$]. From the experiments about the correlation of the chemical processing conditions of the composition of developers, the exposure, and the developing reaction time, it has proved that the enhancement of the diffraction efficiency is impossible in the limited exposure energy and conventional constant chemical reaction time.

• Journal of Environmental Science International
• /
• v.29 no.1
• /
• pp.95-108
• /
• 2020

Silver nanoparticles were loaded onto g-C₃N₄ (CN) with a nanoroll-type morphology (Ag/CN) synthesized using a co-polymerization method for highly selective conversion of toxic nitrobenzene to industrially-valuable aminobenzene. Scanning electron microscopy and high-resolution transmission electron microscopy (HRTEM) images of Ag/CN revealed the generation of the nanoroll-type morphology of CN. Additionally, HRTEM analysis provided direct evidence of the generation of a Schottky barrier between Ag and CN in the Ag/CN nanohybrid. Photoluminescence analysis and photocurrent measurements suggested that the introduction of Ag into CN could minimize charge recombination rates, enhancing the mobility of electrons and holes to the surface of the photocatalyst. Compared to pristine CN, Ag/CN displayed much higher ability in the photocatalytic reduction of nitrobenzene to aminobenzene, underscoring the importance of Ag deposition on CN. The enhanced photocatalytic performance and photocurrent generation were primarily ascribed to the Schottky junction formed at the Ag/CN interface, greater visible-light absorption efficiency, and improved charge separation associated with the nanoroll morphology of CN. Ag would act as an electron sink/trapping center, enhancing the charge separation, and also serve as a good co-catalyst. Overall, the synergistic effects of these features of Ag/CN improved the photocatalytic conversion of nitrobenzene to aminobenzene.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.29-38
• /
• 2015

Cyanide can be leached out from the cyanidation method which has been used to extract high-purity gold and silver from ores, and it becomes a variety of cyanide complexes associated with heavy metals contained in ores. Such cyanide complexes are considered as persistent and non-degradable pollutants which cause adverse effects on humans and surrounding environments. Based on binding force between heavy metals and cyanide, cyanide complexes can be categorized weak acid dissociable (WAD) and strong acid dissociable (SAD). This study comparatively evaluated the performance of photo-catalytic process with regard to forms of cyanide complexes. In particular, both effects of UV LED wavelength and surface modification of photo-catalyst on the removal efficiency of cyanide complexes were investigated in detail. The results indicate that the performance of photo-catalytic oxidation is significantly affected by the form of cyanide complexes. In addition, the effect of UV LED wavelength on the removal efficiency was quite different between free cyanide and cyanide complexes associated with heavy metals. The results support that the surface modification of photo-catalyst, such as doping can improve overall performance of photo-catalytic oxidation of cyanide complexes.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.7-12
• /
• 2002

The gas diffusion electrodes as oxygen cathodes f3r the brine electrolysis process were investigated. The gas diffusion electrode consists of a reaction layer, a gas diffusion layer, and a current distributor. The reaction layer was made from hydrophilic carbon black, hydrophobic carbon black, PTFE(polyterafluoroethylene), and Ag catalyst loaded by the silver mirror reaction or impregnation method. The gas diffusion layer was made from hydrophobic carbon black and PTFE, and Ni mesh was used as the current distributor in the reaction layer. The result that the gas diffusion electrode $(10wt\%\;Ag\;catalyst\;and\;20wt\%\;binder)$ manufactured by applying impregnation method to the carbon black f3r reaction layer showed the better performance was obtained from experiments. From the half-cell test, the measured overpotential of this oxygen cathode was about 700mV, And through the electrolysis experiment under the condition of $80^{\circ}C,\;32wt\%$ NaOH, and $300mA/cm^2$, the electrolysis voltage of this electrode was about 2.2 V, The gas diffusion electrodes manufactured in the present research were capable of continuous operations for three months.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.223-233
• /
• 2014

Cyanidation method has been used to extract high-purity gold and silver in mining industry. Such mining activities have used a large amount of cyanide, and the mine wastewater contained a high level of cyanide has brought about pollution of surrounding aqueous environments. This research was initiated to study $TiO_2$-catalytic UV-LED photo-oxidation to remove cyanide from the mine wastewater. UV lamp has been generally used as a light source in conventional photo-oxidation so far, but it shows numerous drawbacks. For this reason, this study focused on the evaluation of applicability of UV-LED as an alternative light source in cyanide photo-oxidation process. Three types of $TiO_2$ photo-catalyst were compared in terms of performance of photo-oxidation of cyanide, and the results show that Degussa P25 was the most efficient. In addition, four types of UV-LED were tested to compare their efficiencies of cyanide photo-oxidation, and their efficacy was increased in the order of 365 nm lamp-type > 365 nm can-type > 280 nm can-type > 420 nm lamp-type. Not only did this study demonstrate that UV-LED can be used in the photo-oxidation of cyanide as an alternative light source of UV lamp, but also confirmed that the performance of photo-oxidation was significantly influenced by the type of $TiO_2$ catalysts.

• Journal of Integrative Natural Science
• /
• v.2 no.1
• /
• pp.18-23
• /
• 2009

This minireview provides the chosen examples of our recent discoveries in the polymerization of hydrosilanes, dihydrosilole, lactones, and vinyl derivatives using various catalysts. Hydrosilanes and lactones copolymerize to give poly(lactone-co-silane)s with $Cp_2MCl_2$/Red-Al (M = Ti, Zr, Hf) catalyst. Hydrosilanes (including dihydrosilole) reduce noble metal complexes (e.g., $AgNO_3$, $Ag_2SO_4$, $HAuCl_4$, $H_2PtCl_6$) to give nanoparticles along with silicon polymers such as polysilanes, polysilole, polysiloxanes (and silicas) depending on the reaction conditions. Interestingly, phenylsilane dehydrocoupled to polyphenylsilane in the inert nitrogen atmosphere while phenylsilane dehydrocoupled to silica in the ambient air atmosphere. $Cp_2M/CX_4$ (M = Fe, Co, Ni; X = Cl, Br, I) combination initiate the polymerization of vinyl monomers. In the photopolymerization of vinyl monomers using $Cp_2M/CCl_4$ (M = Fe, Co, Ni), the photopolymerization of MMA initiated by $Cp_2M/CCl_4$ (M = Fe, Co, Ni) shows while the polymerization yield decreases in the order $Cp_2Fe$ > $Cp_2Ni$ > $Cp_2Co$, the molecular weight decreases in the order $Cp_2Co$ > $Cp_2Ni$ > $Cp_2Fe$. For the photohomopolymerization and photocopolymerization of MA and AA, the similar trends were observed. The photopolymerizations are not living. Many exciting possibilities remain to be examined and some of them are demonstrated in the body of the minireview.

• Clean Technology
• /
• v.21 no.4
• /
• pp.271-277
• /
• 2015

A photocatalyst which mixed by the commercialized P25-TiO₂ and a synthesized Ag_xO was used in an appropriate weight ratio to effectively produce hydrogen gas in this study. The Ag_xOs were synthesized with the conventional sol-gel method, and tetramethylammonium hydroxides were added at the synthesis process in order to stabilize the solutions, and then the solutions were heat-treated at the temperatures of -5, 25, and 50 ℃, resulted to obtain the three types of silver oxides. Physicochemical properties of the synthesized Ag_xOs were identified through X-ray diffraction analysis (XRD), scanning emission microscopy (SEM), ultraviolet-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS). In the photolysis results of water/methanol (weight ratio 1:1) solution, the mixture of P25-TiO₂/Ag_xO exhibited a significantly higher hydrogen gases evolution, compared to that of pure P25-TiO₂. Additionally, the addition of H₂O₂ as an supplement oxidant and in Ag_xO synthesized at 50 ℃ improved the hydrogen production efficiency. In particular, the emitted hydrogen gases reached to 13,000 μmol during 8 hours when a mixed catalyst, Ag_xO of 0.1 g and P25-TiO₂ of 0.9 g, were used.