• Journal of the Korean Geotechnical Society
• /
• v.28 no.7
• /
• pp.31-40
• /
• 2012

In most design codes, soils are classified as either sandy or clayey soils, and appropriate design equations for each soil type are used to estimate their soil behaviour. However, sand-fine mixtures, which are typically referred to as intermediate soils, are somewhere at the middle of sandy or clayey soils, and therefore a unified interpretation of soil behaviour is necessary. In this paper, a series of cyclic shear tests were carried out for three different combinations of sand-fine mixtures with various fines content. Silica-sand mixture and fines (Iwakuni natural clay, Tottori silt, kaolinite) were mixed together with various mass ratios, while paying attention to the changes of void ratios expressed in terms of sand structure. The cyclic shear strengths of the mixtures below the threshold fines content were examined with the increasing fines contents. As a result, as the fines contents increased, their cyclic deviator stress ratios decreased for dense samples while it increased for loose samples. Additionally, cyclic deviator stress ratio of the mixtures was estimated using the concept of equivalent granular void ratio.

• Journal of the Korean Geographical Society
• /
• v.28 no.2
• /
• pp.99-111
• /
• 1993

The transformation of rocks into unconsoli-dated debris is the prime geomorphic processes including weathering and soil forming process. In these processes, rocks tend to be unconsol-idated debris with small particles. Particularly, typical granite is more likely affected by weathering, since the rock consists of quartz, feldspar and mica that can be easily coarse-grained and well jointed without bedding. The purposes of this study are to clarify the index and properties of mechanical weathering that contributed to transformation of granite distributed in Korea. A total of seventy-three samples of weathering products of granite in Korea were collected during the three-year period, March 30, 1989 to February 21, 1992. The prticle analysis was performed for clay, silt and sand using Sieve and Hydrometer. The results of the analysis are as the followings: First, soil textures in the study area are included seven categories of textures as C, CL, SCL, Sil, SL, LS, and S. Among these textures, the most frequent soil texture were SL, S and SCL in order. Second, the weathering products of granite are crumbled by weathering and hydrothermal. Clay texture consisted of fine materials seems to be influenced by hydrothermal, while Sand texture composed of coarse materials, seems to be significantly influenced by weathering. Third, the index of mechanical weathering by region indicates that Hawngdeung(1) is the lowest as 2.37 and the index by soil texture shows that Clay texture is the lowest as 2.46. Forth, the regression analysis of MW showes that sand/clay variable is the most significant variable. Finally, pedochemical weathering is prevailed on the clayey gruss and geochemical weathering is on the gruss and shattering is on the weathered rock, strongly, but the fine materials in some sites were formed by argillation of hydrothermal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.6
• /
• pp.377-383
• /
• 2000

The composition of primary minerals of sand fractions and secondary minerals of clay fractions were investigated on the polder soils developed from alluvio-marine deposits near to Sapgyo-lake, constructed a sea dike across river estuary located in the west coast. The effects of a topographical sequence on the physico-chemical properties and mineralogical characteristics were evaluated using XRD, DTA, and TG with the chemical composition of $H^+$ saturated clays. Soils located on the seashore side were more silt fraction, higher pH and exchangeable cations than the others. The dominant minerals of soil parent materials are in the order of quartz, feldspars, micas, chlorite and amphibole. According to the greater distance from the lake, the amount of 1:1 minerals increased, but 2:1 minerals decreased. The dominant clay minerals of polder soils are kaolinite, vermiculite and illite. Hydroxy interlayer minerals are abundant in the clay fractions derived from the soil parent materials which have relatively low soil pH.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.4
• /
• pp.284-289
• /
• 2014

Farmers in highlands in South Korea pile up 20 to 30 cm of saprolites, mostly granite- or granite-gneiss-weathered materials, on surface of arable lands every three to five years to compensate eroded soil and sometimes to discontinue soil-borne diseases. Immediate increases of infiltration and percolation rates are expected with coarse textured saprolites while soil drainage becomes poorer in a long-term. In this study, we analyzed mineralogical characteristics and micro-morphology of plow pan to investigate processes making impermeable layers. Soil samples were collected from plow pan, usually located at approximately 20 cm soil depth and at the lower part of piled saprolites, in arable lands in Hoenggye 5-ri, Daekwanryeong-myeon, Gangwon-do (N37.7, E128.7) in which saprolites were added 2, 4, and 8 years ago; saprolites were transported from similar areas. The saturated hydraulic conductivity decreased over time. Based on soil thin section pedography, quartz and feldspar accounted for a majority of minerals. The size of feldspar decreased and macropores became filled with clay or silt particles over time, which implies that macropores were packed with particles weathered from feldspar. The X-ray diffraction (XRD) analysis indicated that intensity of feldspar decreased over time and the reverse was true for kaolinite and illite, indicating that feldspar and mica weathering induced formation of kaolinite and illite. Conclusively, deteriorated drainage by formation of impermeable layers in farms with piled saprolites was caused by accumulation of clay minerals such as kaolinite and illite in macropores; illite and kaolinite can be formed by weathering of mica and feldspar, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.655-661
• /
• 2016

Relationships between saturated conductivity (Ks) and separate contents were evaluated from 44 soil series of arable lands: 18 for paddy fields and 26 for upland crop fields. Saturated hydraulic conductivities of A, B, and C horizons were determined with tension infiltrometer and Guelph permeameter in situ. Sand, silt, clay, and organic matter content of each horizon were analyzed. Based on correlation analysis, sand separate had a positive relationship with Ks for both paddy (r=0.27, p=0.017) and upland fields (r=0.24. p=0.030). Clay content had a negative relationship with Ks for paddy soils (r=-0.32, p=0.005) while significant correlation between them was not found for upland crop fields (r=-0.20, p=0.07). Organic matter content showed a positive relationship with Ks only for upland crop fields (r=0.33, p=0.002). Due to low correlation coefficients between separate contents and Ks, performance of pedotransfer functions was not enough to estimate Ks. It implies that hydraulic properties of arable lands were affected by other factors rather than particle characteristics. Platy structure and plow pan were suggested to limit Ks of paddy fields. Soil compaction and diversity of parent materials were proposed to influence Ks of upland crop fields. It suggests that genetic processes and artificial managements should be included in pedotransfer functions to estimate hydraulic properties appropriately.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.191-194
• /
• 1992

The tomb of the king Muryung, the 25th king of ancient Baegje dynasity in Korea, was proved to be constructed about 1500 years ago. The Physico-chemical characteristics were determined in order to investigate the pedogenic process for tomb soils. Clay and silt content inclosed down to 30~40cm soil depth. The increase of clay was 13.4% in the 10cm surface soil and the estimated time for 1% increase of clay in the profile was about 112 years. There were great changes in chemical properties in the 10cm surface soil, and considerable accumiration of salts and increase of catiom exchange capacity(CEC) down to 30cm depth. The alteration of primary minerals and formation of clay minerals were great in the 10cm surface soil and considerably reconized down to 50~60cm. The result suggested that the development of soil profile from the tomb parent material for the period was 10cm under the forest environment in Korea. The parent material of tomb soil was considered to be transported greyish green clored diorite from other place.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.548-554
• /
• 2016

Optimal range of soil physical quality to enhance crop productivity or to improve environmental health is still in dispute for the upland soil. We hypothesized that the optimal range might be established by comparing soil physical parameters and their interactions inhibiting crop growth. The parameter identifying optimal range covered favorable conditions of aeration, permeability and root extension. To establish soil physical standard two experiments were conducted as follows; 1) investigating interactions of bulk density and aeration porosity in the laboratory test and 2) determining effects of soil compaction and deep & conventional tillage on physical properties and crop growth in the field test. The crops were Perilla frutescens, Zea mays L., Solanum tuberosum L. and Secale cereael. The saturated hydraulic conductivity, bulk density from the root depth, root growth and stem length were obtained. Higher bulk density showed lower aeration porosity and hydraulic conductivity, and finer texture had lower threshold bulk density at 10% aeration bulk density. Reduced crop growth by subsoil compaction was higher in silt clay loam compared to other textures. Loam soil had better physical improvement in deep rotary tillage plot. Combined with results of the present studies, the soil physical quality was possibly assessed by bulk density index. Threshold subsoil bulk density as the upper value were $1.55Mg\;m^{-3}$ in sandy loam, $1.50Mg\;m^{-3}$ in loam and $1.45Mg\;m^{-3}$ in silty clay loam for optimal soil physical quality in upland.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.123-132
• /
• 2019

This study is to estimate the spatial soil moisture using Terra MODIS (Moderate Resolution Imaging Spectroradiometer) satellite data and machine learning technique. Using the 3 years (2015~2017) data of MODIS 16 days composite NDVI (Normalized Difference Vegetation Index) and daily Land Surface Temperature (LST), ground measured precipitation and sunshine hour of KMA (Korea Meteorological Administration), the RDA (Rural Development Administration) 10 cm~30 cm average TDR (Time Domain Reflectometry) measured soil moisture at 78 locations was tested. For daily analysis, the missing values of MODIS LST by clouds were interpolated by conditional merging method using KMA surface temperature observation data, and the 16 days NDVI was linearly interpolated to 1 day interval. By applying the RNN-LSTM (Recurrent Neural Network-Long Short Term Memory) artificial neural network model, 70% of the total period was trained and the rest 30% period was verified. The results showed that the coefficient of determination ($R^2$), Root Mean Square Error (RMSE), and Nash-Sutcliffe Efficiency were 0.78, 2.76%, and 0.75 respectively. In average, the clay soil moisture was estimated well comparing with the other soil types of silt, loam, and sand. This is because the clay has the intrinsic physical property for having narrow range of soil moisture variation between field capacity and wilting point.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.67-71
• /
• 1997

To grasp the physico-chemical properties on the management groups of upland soil, the data obtained from the detailed soil survey which conducted from 1964 to 1979 by Agricultural sciences Institute, were analyzed and classified. The clay content in A horizon soil was low in sandy textured and well adapted types and high in heavy clayey type, and that in B horizon was lowest in volcanic ash type and highest in heavy clayey type. High organic matter content was found in the volcanic ash and plateau type. The correlations among soil physico-chemical properties were significant. Especially canon exchange capacity of B horizon soil was highly correlated with the content of available water, clay, silt and organic matter positively.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.36-43
• /
• 2012

Various methods are used to remediate soil contaminated with heavy metals or petroleum. In recent years, harsh physical and chemical remediation methods are being used to increase remediation efficiency, however, such processes could affect soil properties and degrade the ecological functions of the soil. Effects of soil washing, thermal desorption, and land farming, which are the most frequently used remediation methods, on the physicochemical properties of remediated soil were investigated in this study. For soils smaller than 2 mm, the soil texture were changed from sandy clay loam to sandy loam because of the decrease in the clay content after soil washing, and from loamy sand to sandy loam because of the decrease in the sand content and increase in silt content during thermal desorption, however, the soil texture remained unchanged after land farming process. The water-holding capacity, organic matter content, and total nitrogen concentration of the tested soil decreased after soil washing. A change in soil color and an increase in the available phosphate concentration were observed after thermal desorption. Exchangeable cations, total nitrogen, and available phosphate concentration were found to decrease after land farming; these components were probably used by microorganisms during as well as after the land farming process because microbial processes remain active even after land farming. A study of these changes can provide information useful for the reuse of remediated soil. However, it is insufficient to assess only soil physicochemical properties from the viewpoint of the reuse of remediated soil. Potential risks and ecological functions of remediated soil should also be considered to realize sustainable soil use.