• Journal of Ginseng Research
• /
• v.4 no.2
• /
• pp.175-185
• /
• 1980

A study was made to clarify the topographical. and Physical characteristics of ginseng field in terms of soil science and to find the relationship between soil characteristics and ginseng growth, as well as yield of ginseng roots Forty nine farmer's red ginseng field of ginseng growing area were chosen for this study and investigated for two years. The results obtained were as follow. 1. Ginseng fie1ds with high yield which represent the more than 1.8kg of ginseng root per 3.2m2 were found in soil series of Bancheon, Yeongog, Weongog, etc. whose texture were the clay loam to clay soil. On the other hand, ginseng field with low yield were observed in soil series of seogto whose texture was loamy soil with high content of gravels. 2 Soil of ginseng field with high yield had higher content of clay. silt soil moisture and soil pore as compared with soils of low yields. These soil characteristics were positively correlated with stem length stem diameter and root weight of ginseng plsnt and negatively correlated with rate of missing plant 3. The adequate ranges of soil 3 phase from high yield ginseng field were 40 to 50% of solid Phase, 22 to 35% of liquid phase, 25 to 35% of gaseous phase in top soil and 45 to 55% of solid phase. 28 to 30% of liquid phase. 15 to 20% of gaseous phase in subsoil respectively.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.115-121
• /
• 2009

In order to elucidate the mechanisms affecting plant distributions in the reclaimed dredging area in the Gwangyang steelworks, in the Gwangyang Bay, Korea, we examined soil characteristics and plant distributions in four study sites and a control site in the study area. Desalination occurring along a gradient with increasing elevation, resulting in decrease of soil pH, EC, P, K, Cl, Ca, Mg, and salt and an increase in soil T-N, silt, clay contents. From site 1 (the lowest-elevation site) to site 5 (the highest-elevation site), halophytes decreased in abundance and nonhalophytes increased. The dominant species in each site were: Phragmites communis, Limonium tetragonum, and 12 additional species at site 1, Carex pumila, Suaeda japonica, and 15 additional species at site 2, Spergularia marina, Scirpus planiculmis, and 22 additional species at site 3, Miscantus sinensis, Lespedeza bicolor, and 26 additional species at site 4 and Pinus thunberii, Rhododendron mucronulatum, and 39 additional species at site 5, which resembled a naturally-occurring P. thinbergii community. Cluster analysis of the vegetation data matrix grouped the 35 plots into 5 major groups, and cluster analysis using the soil environment data matrix revealed 4 major groups. CCA of the floristic and environmental data matrix showed a positive relationship of SAR, EC, Na, Cl, and Ca, which are related to salt, in the $1^{st}$ axis and $2^{nd}$ axis, but negative relationships for altitude, organic contents, silt, and clay contents. Notably, plant species in the reclaimed dredging area that were separated along the $1^{st}$ axis showed strong relationships with factors that related to salt. Long-term exposure to natural rainfall in the reclaimed dredging area changed the soil characteristics, such as salinity. This change in soil characteristics might alter the SAR, which affects plant survival strategies in a given habitat. These results strongly indicated that factors related to salt and elevation play important roles in determining the overall plant distribution in the reclaimed dredging area.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.3
• /
• pp.34-43
• /
• 2010

The fate of hydrophobic organic contaminants (HOCs) in ground water is highly affected by the distribution and property of the carbonaceous materials (CMs) in subsurface sediments. CMs in soils consist of organic matters (e.g., cellulose, fulvic acid, humic acid, humin, etc.) and black carbon such as char, soot, etc. The distribution and property of CMs are governed by source materials and geological evolution (e.g., diagenesis, catagenesis, etc.) of them. In this study, the distribution and property of CMs in subsurface sediments near the Imjin river in the Republic of Korea and HOC sorption property to the subsurface sediments were investigated. The organic carbon contents of sand and clay/silt layers were about 0.35% and 1.37%, respectively. The carbon contents of condensed form of CMs were about 0.13% and 0.45%, respectively. The existence of black carbon was observed using scanning electron microscopes with energy dispersive spectroscopy. The specific surface areas (SSA) of CMs in heavy fraction(HFrCM) measured with N2 were $35-46m^2/g$. However, SSAs of those HFrCM mineral fraction was only $1.6-4.3m^2/g$. The results of thermogravimetric analysis show that the mass loss of HFrCM was significant at $50-200^{\circ}C$ and $350-600^{\circ}C$ due to the degradation of soft form and condensed form of CMs, respectively. The trichloroethylene (TCE) sorption capacities of sand and clay/silt layers were similar to each other, and these values were also similar to oxidzed layer of glacially deposited subsurface sediments of the Chanute Air Force Base (AFB) in Rantoul, Illinois. However, these were 7-8 times lower than TCE sorption capacity of reduced layer of the Chanute AFB sediments. For accurate prediction of the fate of hydrophobic organic contaminants in subsurface sediments, continuous studies on the development of characterization methods for CMs are required.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.73-88
• /
• 2009

Geotechnical variability is a complex feature that results from many independent sources of uncertainties, and is mainly affected by inherent variability and measurement errors. This study evaluates the coefficient of variation (COV) of soil properties and soil layers at Song-do region in Korea. Since soil variability is sensitive to soil layers and soil types, the Cays by soil layers (reclaimed layer and marine layer) and the COVs by soil types (clay and silt) were separately evaluated. It is observed that geotechnical variability of marine layer and clay is relatively smaller than that of reclamation layer and silt. And, the highly weathered rock and soil show the higher cays in the interpretation of the strength parameters of the fresh and weathered rock. And the proposed COV of Songdo area can be used for the reliability-based design procedure.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.87-94
• /
• 2013

As sediment contamination problems have recently been raised in Korea, the need for technologies to remove contaminants in sediments has increased. Contaminated sediments in Korea has been annually dredged and treated using processes of coagulation/flocculation, sedimentation on barges, dewatered and dried at prepared site, and then disposed at a landfill site, which is very costly, and only a limited landfill space available in Korea. Contaminants in media containing a high percentage of silt and clay sized particles, typically, are strongly adsorbed on the particles and difficult to remove. Particle separation processes that separate the fine clay and silt particles from the coarser sand and gravel and concentrate the contaminants into a smaller volume of sediment that can be further treated of disposed of, are very effective in the post step processes. In this study are to test the feasibility of treating dredged sediments using a hydrocyclone process, and to estimate design parameters for a pilot scale test. A hydrocyclone was operated to separate larger particles from the sediments. It was found that the particle separation was greatly affected by the solid contents and inlet pressure in the hydrocyclone.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2010

The soil mechanical characteristics according to geologic conditions were investigated in the study area. The geology of study area was consisted of Ingok Tuff, Yuchi Conglomerate and Dado Tuff. Yuchi Tuff covered about 80% of the study area. The disturbed and undisturbed soils were sampled from the conglomerate area, Tuff area and Shale area, and then a series of the laboratory soil tests was performed. The soils sampled from the conglomerate area have a large dry unit weight and a low permeability relatively, while the soils sampled from tuff and shale areas have a small dry unit weight and a high permeability. It is proven that the soil permeability is highly affected by the effective grain size and the silt and clay content. That is, the soil permeability is increased with increasing the effective grain size, and the soil permeability is decreased with increasing the silt and clay content.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.3
• /
• pp.5-15
• /
• 1994

In order to examine the propagation loss associated with water depth and bottom sediment type, an acoustic experiment was conducted in the Southeast Sea of Korea. A sound source was towed along the pre-defined tracks in about 5kts and the signal was simultaneously received at three bottom-moored hydrophones. The propagation loss of sound wave traveling along the isodepth was compared with that crossing the isodepth. The former case shows, in general, less loss than the latter. This trend is stronger as the distance between a source and a receiver increases. When sound wave propagates across the isodepth, we also find that the propagation loss is influenced by the upsloping and downslopoing conditions of wave propagtion. In general, the propagation loss under downsloping condition is smaller than that of upsloping condition, and the differences are as large as 10dB in some cases. However, little difference are found in the propagation loss depending on the bottom types : gravelly sand and sand-silt-clay. Meanwhile, the optimum propagation frequencies are found within range of 130-255Hz.

• Korean Journal of Ecology and Environment
• /
• v.50 no.3
• /
• pp.355-361
• /
• 2017

In this study, we investigated the response of freshwater oligochaete, Tubifex tubifex, to the water temperature changes and the differences of substrate composition in a laboratory condition. The changes of body shape were observed in a test cage according to the water temperature change ranging from $10^{\circ}C$ to $30^{\circ}C$ with $2^{\circ}C$ interval every 10 minutes. The substrate preference was observed with four different substrate composition from silt-clay to coarse sand. Our results displayed that T. tubifex preferred substrates with the smallest particle size (<0.063 mm). The water temperature influenced on the activity and body shape of T. tubifex, showing low activity with the coiled and constricted body shapes at lower temperature and high activity with relaxed linear body shapes at higher temperature.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.35-40
• /
• 2011

Magnesia-carbon brick is used to refractory material in Converter and/or Ladle furnace for molten steel manufacturing. The rapid growth of steel making industry, molten steel industry is increased. Therefore, growth of molten steel industry lead to make waste magnesia-carbon brick by repair of Converter and/or Ladle furnace. These waste magnesia-carbon brick is abandoned all. Besides, as it is loosely composed of silt and clay including sand falling according to the type of gangue, rainwater inflows and outflows relatively easily, but silt or clay particles absorb water for a long period, weakening ground. This study tried to show that when colluvial soil is solidified using waste magnesia-carbon brick powder as a way to solidify strengthen the rigidity of colluvial soil.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.257-266
• /
• 2018

East China Sea (ECS) is known to be supplied with large amounts of sediments form Huanghe, Changjiang and various rivers in Korea. Many studies have been conducted to identify the effects of rivers and deposition process of ECS, but no consensus has been reached. In this study, clay minerals, rare earth elements (REEs) and grain size were analyzed to study the provenance and sedimentation environment of core 99MAP-P63 in ECS. Clay mineral contents of 99MAP-P63 are abundant in order of illite, chlorite, kaolinite, and smectite. The provenance of 99MAP-P63 sediments using clay minerals is interpreted as the Changjiang regardless of depth. As a result of REEs analysis, 99MAP-P63 sediments are very similar to Chinese rivers sediments. Therefore, the provenance of 99MAP-P63 is Changjiang, and the influence of Korean river seems to be insignificant. 99MAP-P63 sediments are generally classified as sandy silt, but the top of the core is divided into sand with a sand contents of 85 %. Compared with surrounding cores, sandy silt sediments arecorresponded to the low stand stage when sea-level was low, and the sediments were thought to have been supplied directly through the paleo-Changjiang. Sandy sediments in uppermost of core are corresponded to transgressive stage. Although distance from estuary was increased due to sea-level rise, it was possible to supply coarse sediments due to high bottom stress, and the paleo-Changjiang sediments deposited in study area were re-deposited.