• Elastomers and Composites
• /
• 제28권3호
• /
• pp.191-197
• /
• 1993

The graft copolymerization of methyl methacrylate(MMA) onto natural rubber latex(NRL) initiated by t-butyl hydroperoxide(t-BHPO) was investigated in aquous medium. The grafting percentage, grafting efficiency and total conversion were observed in various reaction conditions such as monomer, initiator and emulsifier concentration, reaction temperature, reaction time and agitation speed. The optimum conditions for the graft copolymerization onto natural rubber latex were as follows ; At given monomer concentration of $3{\times}10^{-2}mole/l$, the maximum grafting percentage was appeared in the case of grading in initiator concentration of $4{\times}10^{-2}mo1e/l$ and emulsifier concentration of 0.2wt.% at $40^{\circ}C$ for 5hrs.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.10-22
• /
• 2007

To prepare weather-resistant silicone/acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by a radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The compositions of monomers were adjusted to fix the glass transition temperature of acrylic polymer for $20^{\circ}C$. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects for weatherability were examined. The presence of MPTS in silicone/acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the silicone/acrylic resins containing 30 wt% of MPTS had weather-resistant properties.

• 폴리머
• /
• 제29권2호
• /
• pp.166-171
• /
• 2005

EPDM(ethylene propylene diene monomer)1실리콘 고무 블렌드를 제조하고, 상용화제와 열노화 시간에 따른 물성 변화를 살펴보았다. EPDM과 실리콘 고무(SR)의 조성비는 90/10에서 $10/90\;wt\%$ 사이로 조절하였으며, Brabender사의 Plasticoder를 사용하여 용융 혼합하고, 열프레스로 가교하였다. 가교된 EPDM/SR 블렌드의 모폴로지를 주사전자현미경으로 관찰하였다. 또한, 블렌드를 $100^{\circ}C$에서 24, 48, 96시간 동안 열노화시켜 경도, 인장 강도, 신장률 및 접촉각을 측정하였다. 모폴로지를 조사한 결과 상용화제를 첨가한 블렌드의 분산상의 크기가 감소하였다. 열노화 시간이 증가함에 따라, 블렌드의 경도와 인장 강도는 감소하였으며, 신장률과 접촉각은 증가하였다.

• 한국안광학회지
• /
• 제11권3호
• /
• pp.259-265
• /
• 2006

우리는 하이드로겔 렌즈의 단점을 보완하기 위해 AA(Acrylic acid) and BMA(butyl methacrylate)의 재료를 중합하였다. 실리콘의 합성과정은 다음과 같다. Disocynate를 HEMA(2-hydroxyethylmethacrylate)와 촉매 하에서 반응시킨 후 다시 고 산소 투과성 특성을 가지는 bis(hydroxyalkyl)terminated poly(dimethylsiloxane)를 반응시켜 Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer를 합성하였다. HEMA(2-hydroxyet-hylmethacrylate)는 중합 가능한 prepolymer를 만들기 위해서 사용하였으며, Urethane의 도입은 탄성이 좋고 산소투과성을 높이기 위해 사용하였다. 이렇게 만들어진 prepolymer를 기존 하이드로겔 콘택트렌즈의 재료들과 공중합하여 산소투과성이 좋은 실리콘 하이드로겔 렌즈(silicone hydrogel contact lens)를 제조하였다. 콘택트렌즈 제조를 위해 기존에 사용된 콘택트렌즈 재료에 탄성과 유연성이 좋은 BMA(Butyl methacrylate), 습윤성이 좋은 AA(Acrylic acid)를 첨가하였다. 개시제로는 AIBN(Azobis2-methylpropionitrile)을, 교차결합제로 EGDMA(Ethylene Glycol Dimethacrylat)를 사용하였다. 각 monomer의 특징에 따라 여러 가지 조합을 시도하여 기본적인 콘택트렌즈 물성을 만족하면서 동시에 산소투과성과 습윤성이 좋은 렌즈를 제조하였다. SILICONE, HEMA, NVP과 EGDMA등이 포함된 SN은 팽윤율(swelling ratio) 9.38%, 함수율(water content) 23.72%로 나타났고, 가시광선 투과율은 88%로 나타났다. AA를 첨가한 SA는 팽윤율(swelling ratio) 9.38%, 함수율(water content) 23.72%로 나타났고, 가시광선 투과율은 88%로 나타났다. SN에 BMA를 첨가한 SB는 팽윤율(swelling ratio) 12.50%, 함수율(water content) 18.56%로 나타났고, 가시광선 투과율은 88%로 나타났다. SN에 AA와 BMA를 첨가한 SAB는 팽윤율(swelling ratio) 8.33%, 함수율(water content) 12.93%로 나타났고, 가시광선 투과율은 88%로 나타났다.

• 폴리머
• /
• 제32권2호
• /
• pp.95-102
• /
• 2008

The $\alpha$,$omega$-diacrylate poly(dimethylsiloxane) (DA-PDMS) containing vinyl ester of versatic acid/vinyl acetate (Veova-10/VAc) was prepared by emulsion copolymerization of (DA-PDMS), Veova-10 (with VAc), and auxiliary agents at $85^{\circ}C$ in the presence of ammonium peroxodisulfate (APS) as an initiator. Sodium dodecyl sulfate (SDS) and nonylphenol ethylene oxide-40 units (NP-40) were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FT-IR). Thermal properties of the copolymers were studied by using thermogravimetric analysis(TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of variables such as temperature, agitation speed, surfactant kinds, molecular weights, initiator, and DA-PDMS concentrations on the properties of the silicone-containing Veova-10/VAc emulsions were examined. The calculation of monomer conversion versus time histories indicates that by increasing the DA-PDMS concentration the polymerization rate and the number of polymer particles decrease, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.246-249
• /
• 2017

Pollution flashover of outdoor insulators is a common risk, which affects the safe operation of overhead transmission networks. Early electrical power systems, which feature insulators made from ceramic materials have been used all over the world with good performance. At present, non-ceramic insulators are in common use, as a result of their good electrical as well as mechanical properties. The aim of this paper is to discuss and compare the flashover performance of insulators typically used in power lines, such as, porcelain, ethylene-propylene-diene-monomer (EPDM) rubber, room temperature vulcanized (RTV) and high temperature vulcanized (HTV) coated silicone rubber. The effect of various parameters, including the severity of pollution, ice accumulation, and shade profile, are considered.. From the studies reviewed it was concluded that there is a distinct difference in the flashover voltages of different types of insulators, and the silicone provides the best flashover performance of all insulating materials.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.135-140
• /
• 2020

An experimental study was conducted using the tracking wheel test (IEC 62217) method for evaluating the performance of insulator materials, in particular ethylene propylene diene monomer (EPDM) and silicone rubber. In addition, we studied the tracking characteristics resulting from applying the same method for the shape of the insulator housing, that is, the performance of regular and alternating sheds. The evaluation parameters were leakage current, surface characteristics, SEM, EDX, hydrophobicity, and temperature distribution; likewise, we applied the commercial frequency dry (and wet) flashover voltage test. We found that the regular shed had a greater leakage current than the alternating shed and that the recovery of the hydrophobicity in terms of rest time was greater than that of the EPDM in terms of leakage current. All of the regular-shed insulators of silicone rubber had tracking traces and choking on the sheath parting line, while the alternating shed showed only choking at the interface but no tracking traces. Therefore, it can be concluded that the commercial frequency wet flashover voltage of the silicone rubber with regular shed before and after the tracking wheel test is higher than that of the alternating shed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.77-80
• /
• 2000

In order to determine what influences the interfacial charge in EPDM/XLPE laminates, We used PEA (pulsed electroacoustic) method. Interfacial properties such as space charge accumulation and breakdown strength in crosslinked polyethylene (XLPE)/ethylene-propylene-diene monomer (EPDM) laminates were investigated. Interfacial charge develops when the EPDM is laminated with XLPE. It showed the positive polarity same as the simulation in case on intercase of EPDM/XLPE. In case of coupling agent added silicone oil, as increasing the content of coupling agent, the interfacial charge decreased. Details of the results are given and their origins discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.77-80
• /
• 2000

In order to determine what influences the interfacial charge in EPDM/XLPE laminates, We used PEA (pulsed electroacoustic) method. Interfacial properties such as space charge accumulation and breakdown strength in crosslinked polyethylene (XLPE)/ethylene-propylene-diene monomer (EPDM) laminates were investigated. Interfacial charge develops when the EPDM is laminated with XLPE. It showed the positive polarity same as the simulation in case on intercase of EPDM/XLPE. In case of coupling agent added silicone oil, as increasing the content of coupling agent, the interfacial charge decreased. Details of the results are given and their origins discussed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.164-165
• /
• 2021

To prepare the good-adherent and weather-resistant acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA) was varied to be 5, 10, 15, 20 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents and di-n-butyltindilaurate(DBTDL) was used for drying accelerator. The equivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retention and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.